Works from 1999
Structural and electrochemical analysis of layered compounds from Li < inf> 2 MnO < inf> 3, C. S. Johnson, S. D. Korte, J. T. Vaughey, M. M. Thackeray, T. E. Bofinger, Y. Shao-Horn, and S. A. Hackney
Depression of pyrite flotation by yeast and bacteria, S. K. Kawatra and T. C. Eisele
Determination of N-methylcarbamate pesticides from spiked matrices using supercritical fluid extraction, Mijeong Lee Jeong and David J. Chesney
Investigation of modifier effects in supercritical CO2 extraction from various solid matrices, Mijeong Lee Jeong and David J. Chesney
Coherency strain-induced ordering in substitutional alloys, J. K. Lee
Site occupancy in ternary Ll2 ordered alloys as determined by diffraction: Observations on (Al,Cr)3 Ti alloys, J. P. Nic and D. E. Mikkola
High frequency fatigue crack propagation behavior of a nickel-base turbine disk alloy, S. A. Padula, A. Shyam, R. O. Ritchie, and Walter Milligan
Thresholds for High-cycle Fatigue in a Turbine Engine Ti-6Al-4V Alloy, R. O. Ritchie, B. L. Boyce, J. P. Campbell, O. Roder, A. W. Thompson, and Walter Milligan
Structural fatigue in spinel electrodes in Li/Lix [Mn2]O4 cells, Y. Shao-Horn, S. A. Hackney, A. J. Kahaian, K. D. Kepler, E. Skinner, J. T. Vaughey, and M. M. Thackeray
The impact of metals on society part IX: United States, R. L. Smith
Stabilization of insertion electrodes for lithium batteries, M. M. Thackeray, C. S. Johnson, A. J. Kahaian, K. D. Kepler, J. T. Vaughey, Y. Shao-Horn, and S. A. Hackney
Formation of nanoscale trenches and wires as a pathway to phase-separation in strained epitaxial Ge-Sn alloys, J. Zhang, X. Deng, D. J. Swenson, S. A. Hackney, and M. Krishnamurthy
Works from 1998
A molecular dynamics study on the liquid-amorphous-crystalline transition in a Lennard-Jonesian FCC system: I. Bulk crystal, H. K. Chang, S. G. Kim, B. Cheong, W. M. Kim, M. Chung, T. S. Lee, and J. K. Lee
A molecular dynamics study on the liquid-amorphous-crystalline transition in a Lennard-Jonesian FCC system: II. Nanocrystalline plates, H. K. Chang, S. G. Kim, B. Cheong, W. M. Kim, M. Chung, T. S. Lee, and J. K. Lee
Misfit dislocation patterning in thin films, K. Cholevas, N. Liosatos, A. E. Romanov, M. Zaiser, and E. C. Aifantis
FTIR internal reflection spectroscopy studies of the effect of pH on adsorption of oleate/oleic acid at the surface of a TiO < inf> 2 thin film deposited on a Ge single crystal, Jaroslaw Drelich, Yongqiang Lu, Liyun Chen, Jan D. Miller, and Sivaraman Guruswamy
Preparation of spherical toner particles for atomic force microscopic studies of colloidal forces, J. Drelich, J. Nalaskowski, and J. D. Miller
Selective froth flotation of PVC from PVC/PET mixtures for the plastics recycling industry, J. Drelich, T. Payne, J. H. Kim, J. D. Miller, R. Kobler, and S. Christiansen
Laboratory baffled-column flotation of mixed Campbell Eagle seam bituminous coal, T. C. Eisele, K. J. Shoop, S. J. Ripke, and T. C. Rao
A macrocomposite al brake rotor for reduced weight and improved performance, Xiaodi Huang and Kip Paxton
Ferrobasalts from the Central Indian Ocean Basin, S. D. Iyer, R. Mukhopadhyay, and D. C. Popko
On-line measurement of slurry rheology in a thickener at a copper concentrator, S. K. Kawatra and A. K. Bakshi
Binding iron ore pellets with fluidized-bed combustor fly ash, S. K. Kawatra, T. C. Eisele, and D. D. Banerjee
The Role of Plasticity as a Limiting Factor in the Compressive Failure of High Strength Ceramics, J. Lankford, W. W. Predebon, J. M. Staehler, G. Subhash, Bruce J. Pletka, and C. E. Anderson
Dynamic interaction between a coherent precipitate and an edge dislocation, Jong K. Lee
Structural Features of Low-Temperature LiCoO < inf> 2 and Acid-Delithiated Products, Y. Shao-Horn, S. A. Hackney, C. S. Johnson, A. J. Kahaian, and M. M. Thackeray
Impact of metals on society part II: Ancient conflict, Raymond L. Smith
The impact of metals on society part I: Antiquity, Raymond L. Smith
The impact of metals on society: Part IV: Rome, R. L. Smith
The impact of metals on society Part V: Spain to 1500, R. L. Smith
Works from 1997
The mechanical properties of in-situ composites, R. M. Aikin
Hardness measurements of nanophase AL/AL-oxide consolidated composites, P. Apte, B. H. Suits, and R. W. Siegel
The fatigue resistance of TiAl-based alloys, Kwai S. Chan
Macrosegregation in directionally solidified dendritic alloys, R. N. Grugel and L. N. Brush
Dendrite fragmentation and the effects of fluid flow in castings, A. Hellawell, S. Liu, and S. Z. Lu
Replacing Al powder with Al slag or recycled foil in cellular concrete, Jiann Yang Hwang and X. Michael Song
Pyrite recovery mechanisms in coal flotation, S. K. Kawatra and T. C. Eisele
Structure of crystalline interfaces, K. R. Kinsman and H. I. Aaronson
Morphology of coherent precipitates via a discrete atom method, Jong K. Lee
Effects of gaseous hydrogen and water vapor pressure on environmental embrittlement of Ni3 Al, K. H. Lee, J. T. Lukowski, and C. L. White
Minimization of hexavalent chromium in magnesite-chrome refractory, Y. Lee and C. L. Nassaralla
Reinforcement/matrix interaction in Al2O3 and Al2O3 -ZrO2 fiber-reinforced Ni3 Al matrix composites, Aldo E. Murut and Calvin L. White
Consolidation of nanostructured metal powders by rapid forging: Processing, modeling, and subsequent mechanical behavior, G. R. Shaik and W. W. Milligan
Effect of rock breakage characteristics and fines/clay content on the autogenous grinding of iron ore, K. J. Shoop and S. K. Kawatra
Plastic deformation of hafnium under uniaxial compression, G. Subhash, G. Ravichandran, and B. J. Pletka
Works from 1996
Non-linearity, periodicity and patterning in plasticity and fracture, E. C. Aifantis
Rapid determination of non-Newtonian flow behavior in mineral suspensions, A. K. Bakshi and S. K. Kawatra
The fracture resistance and crack-tip micromechanics of in-situ intermetallic composites, Kwai S. Chan and David L. Davidson
Gravitational effects on microstructural development in liquid phase sintered materials, T. H. Courtney
Process modeling of the mechanics of mechanical alloying, T. H. Courtney and D. Maurice
Cracks in gradient elastic bodies with surface energy, G. Exadaktylos, I. Vardoulakis, and E. C. Aifantis
Screw dislocation near a triple junction of phases with different elastic moduli: I. General solution, M. Yu Gutkin, A. E. Romanov, and E. C. Aifantis
Nonlinear effects in periodic surface limited grain growth, S. A. Hackney
Periodic behavior in surface limited grain growth, S. A. Hackney
Some consequences of thermosolutal convection: The grain structure of castings, G. Hansen, A. Hellawell, S. Z. Lu, and R. S. Steube
Effect of viscosity on the cut (d50 ) size of hydrocyclone classifiers, S. K. Kawatra, A. K. Bakshi, and M. T. Rusesky
On-line Measurement of Viscosity and Determination of Flow Types for Mineral Suspensions, S. Komar Kawatra and A. K. Bakshi
Rheological Characterization of Mineral Suspensions using a Vibrating Sphere and a Rotational Viscometer, S. Komar Kawatra, A. K. Bakshi, and T. E. Miller
A study on coherency strain and precipitate morphology via a discrete atom method, Jong K. Lee
Effects of applied stress on coherent precipitates via a discrete atom method, Jong K. Lee
Kinetics of water vapor reactions with intergranular fracture surfaces of Ni3Al with and without boron, K. H. Lee, J. T. Lukowski, and C. L. White
Film thickness change due to grain boundary migration in stressed thin films at elevated temperatures, T. M. Lillo, M. R. Plichta, and S. A. Hackney
Milling dynamics: Part. II. dynamics of a SPEX mill and a one-dimensional mill, D. Maurice and T. H. Courtney
Milling dynamics: Part. III. integration of local and global modeling of mechanical alloying devices, D. Maurice and T. H. Courtney
Microconstituent development and coarsening in certain three-phase systems, G. C. Mukira and T. H. Courtney
On the modelling of diffusion bonding in materials: Superplastic Super Alpha-2, J. Pilling, N. Ridley, and M. F. Islam
Mathematically modeling mesoscale microstructural evolution, Bruce Pletka and Long Qing Chen
The recycling of magnesium makes ¢ents, Lisabeth Riopelle
On the preparation and crystal structure of a new form of PtGa2, D. Swenson and B. Morosin
In Situ Immobilization of Heavy Metals Associated with Uranium Leach Mines by Bacterial Sulfate Reduction, John L. Uhrie, James I. Drever, Patricia J.S. Colberg, and Carl C. Nesbitt
Works from 1995
Glasslike behavior in a nanostructured Fe/Cu alloy, J. E. Carsley, W. W. Milligan, S. A. Hackney, and E. C. Aifantis
A Simple, Mixtures-Based Model for the Grain Size Dependence of Strength in Nanophase Metals, J. E. Carsley, J. Ning, Walter W. Milligan, Stephen A. Hackney, and Elias C. Aifantis
The effects of ball size distribution on attritor efficiency, T. M. Cook and T. H. Courtney
The Nucleation and Growth of Graphite-The Modification of Cast Iron, D. D. Double and Angus Hellawell
Letters to the editor, Seth Elliot, Jay Pruce, Kevin Marsden, Jorge Luis González-Velázquez, Gustavo Díaz, Jeanie Shannon, Lloyd A. Heldt, and David R. Forrest
Disciplinary Patterns in Degrees, Faculty and Research Funding, Richard W. Heckel
The effect of particle size and volume fraction on the aging behavior of a liquid-phase sintered SiC/aluminum composite, G. M. Janowski and B. J. Pletka
Cavitation Erosion and Abrasive wear of Ni3 Al Alloys, M. L. Johnson, Donald E. Mikkola, and R. N. Wright
Observation and Measurement of Grain Rotation and Plastic Strain in Nanostructured Metal Thin Films, M. Ke, Stephen A. Hackney, Walter W. Milligan, and Elias C. Aifantis
Coherency strain analyses via a discrete atom method, Jong K. Lee
Intrinsic ductility of Ni3Al with and without boron at 77K, K. H. Lee and C. L. White
Strain rate effect on moisture and hydrogen-induced environmental embrittlement of Ni3Al with and without boron, K. H. Lee and C. L. White
Modification of Al-Si alloys: Microstructure, thermal analysis, and mechanisms, Shu Zu Lu and A. Hellawell
Using fractal analysis to describe irregular microstructures, Shu Zu Lu and Angus Hellawell
Modeling of mechanical alloying: Part II. Development of computational modeling programs, D. Maurice and T. H. Courtney
Modeling of mechanical alloying: Part III. Applications of computational programs, D. Maurice and T. H. Courtney
Local interface response to dislocation strain fields at the Al/SiO < inf> 2 and Al/C boundary region, E. D. McCarty and S. A. Hackney
Superplasticity in Al2O3 ZrO2 Al2 TiO5 ceramics, J. Pilling and James Payne
Strain-rate effects in high-purity alumina, James M. Staehler, William W. Predebon, Bruce J. Pletka, and Ghatu Subhash
The constitutive behavior of refractory metals as a function of strain rate, Ghatu Subhash
An analytical gradient plasticity solution for mode III, David J. Unger and Elias C. Aifantis
The asymptotic solution of gradient elasticity for mode III, David J. Unger and Elias C. Aifantis
Stand‐off positions and nonuniform distributions of misfit dislocations in heterophase systems, M. Yu. Gutkin, A. E. Romanov, and E. C. Aifantis
Works from 1994
The elastic strain energy of growth ledges on coherent and partially coherent precipitates, G. Chen, J. K. Chen, J. K. Lee, and W. T. Reynolds
Elevated-temperature stability of mechanically alloyed Cu-Nb powders, R. J. Comstock and T. H. Courtney
On the stand‐off positions of misfit dislocations, M. Yu Gutkin and A. E. Romanov
Edge instabilities in thin plates, S. A. Hackney
Current and Emerging Statistical Trends in Engineering Education, Richard W. Heckel
Synthesizing mullite from beneficiated fly ash, Jiann Yang Hwang, Xiaodi Huang, and Allison M. Hein
Phase stability in (Ni, Pt)3Al alloys, Janice L. Kamm and Walter W. Milligan