Works from 2005
Lithium-manganese oxide electrodes with layered-spinel composite structures xLi2 MnO3 • (1 - X)Li1 + y Mn2 - Y O4 (0 < x < 1, 0 ≤ y ≤ 0.33) for lithium batteries, C. S. Johnson, N. Li, J. T. Vaughey, S. A. Hackney, and M. M. Thackeray
A Modeling Study of Cyclical Phase Transformations, Jong K. Lee
A model for slip irreversibility, and its effect on the fatigue crack propagation threshold in a nickel-base superalloy, A. Shyam and W. W. Milligan
Investigation of creep deformation mechanisms at intermediate temperatures in René 88 DT, G. B. Viswanathan, P. M. Sarosi, M. F. Henry, D. D. Whitis, W. W. Milligan, and M. J. Mills
Shear-SANS study of single-walled carbon nanotube suspensions, H. Wang, G. T. Christopherson, Z. Y. Xu, L. Porcar, D. L. Ho, D. Fry, and E. K. Hobbie
Nanoindentation of injection molded PLA and self-reinforced composite PLA after in vitro conditioning for three months, Debra D. Wright-Charlesworth, Darinda M. Miller, Ibrahim Miskioglu, and Julia A. King
The effect of processing conditions on the properties of poly(methyl methacrylate) fibers, Debra D. Wright, Eugene P. Lautenschlager, and Jeremy L. Gilbert
Investigation of shear band evolution in amorphous alloys beneath a Vickers indentation, Hongwen Zhang, Xiaoning Jing, Ghatu Subhash, Laszlo J. Kecskes, and Robert J. Dowding
Submissions from 2004
Method of improving impact absorbing and deformation control characteristics of vehicle components, Ari Garo Caliskan, Paul G. Sanders, Armando Mateormando Joaquin, and Matthew John Zaluzec
Determination of Solid Surface Tension from Particle-Substrate Pull-off Forces Measured with the Atomic Force Microscope, Jaroslaw Drelich, Garth W. Tormoen, and Elvin R. Beach
Theoretical contact angles on a nano-heterogeneous surface composed of parallel apolar and polar strips, Changpeng Feng and Jaroslaw W. Drelich
Water-based bitumen recovery from diluent-conditioned oil sands, Jan Hupka, J. D. Miller, and Jaroslaw W. Drelich
Quantitative metallography of β-Sn dendrites in Sn-3.8Ag-0.7Cu ball grid array solder balls via electron backscatter diffraction and polarized light microscopy, A. Lalonde, D. Emelander, J. Jeannette, C. Larson, W. Rietz, D. J. Swenson, and D. W. Henderson
Rate of bitumen film transfer from a quartz surface to an air bubble as observed by optical microscopy, Dariusz Lelinski, Jaroslaw Drelich, Jan D. Miller, and Jan Hupka
Effects of microstructure on the high temperature constitutive behavior of IN100, W. W. Milligan, E. L. Orth, J. J. Schirra, and M. F. Savage
Bentonite binder effective strength (BESt) test for unfired iron ore pellets, S. J. Ripke and S. K. Kawatra
Effects of deformation behavior on fatigue fracture surface morphology in a nickel-base superalloy, A. Shyam and W. W. Milligan
Time-resolved small-angle neutron scattering study of polyethylene crystallization from solution, Howard Wang
Effect of carrier gas on the growth rate, growth density, and structure of carbon nanotubes, Yoke Khin Yap, Vijaya Kayastha, Stephen Hackney, Svetlana Dimovski, and Yury Gogotsi
Small angle neutron scattering from single-wall carbon nanotube suspensions: Evidence for isolated rigid rods and rod networks, W. Zhou, M. F. Islam, H. Wang, D. L. Ho, A. G. Yodh, K. I. Winey, and J. E. Fischer
Works from 2003
Adaptation of four-stroke motorcycle engine to continuously variable transmission for snowmobile application, Brian D. Barr, David J. McKinstry, Aaron S. Messenger, Jason M. Seidenstucker, Daniel H. Kallio, Daniel P. Hoffman, and Bernhard P. Bettig
Numerical homogenization of active material finite-element cells, Markus J. Buehler, Bernhard P. Bettig, and Gordon Parker
Foreword, S. W. Chen, H. M. Lee, D. J. Swenson, C. R. Kao, S. E. Mohney, M. R. Notis, and R. Schmid-Fetzer
Sintering of magnetite pellets under oxidizing, neutral and reducing atmospheres, S. K. Kawatra and S. J. Ripke
Morphology and crystallization kinetics of melt miscible polyolefin blends, Alejandro J. Müller, Maria Luisa Arnal, Ana Liz Spinelli, Edgar Cañizales, Cristian C. Puig, Howard Wang, and Charles C. Han
Works from 2002
Pull-off force measurements between rough surfaces by atomic force microscopy, E. R. Beach, G. W. Tormoen, Jaroslaw W. Drelich, and R. Han
Mineral matter distribution on coal surface and its effect on coal wettability, A. Gosiewska, Jaroslaw W. Drelich, J. S. Laskowski, and M. Pawlik
Recovery of expanded polystyrene from coated patterns rejected from lost foam casting, B. J. Pletka and J. Drelich
Structural stability of LiCoO < inf> 2 at 400°C, Y. Shao-Horn, S. A. Hackney, A. J. Kahaian, and M. M. Thackeray
Fatigue-crack-propagation thresholds in a nickel-base superalloy at high frequencies and temperatures, A. Shyam, S. A. Padula, S. I. Marras, and W. W. Milligan
Submissions from 2001
A reduced-scale brake dynamometer for friction characterization, Paul G. Sanders, T. M. Dalka, and R. H. Basch
Methods for weld monitoring and laser heat treatment monitoring, P. G. Sanders and H. Keng Leong
Deformation and strength behavior of two nickel-base turbine disk alloys at 650 °c, Shubhayu Sinharoy, Pauline Virro-Nic, and Walter W. Milligan
Fractal Dislocation Patterning in Plastically Deformed NaCl Polycrystals, M. Zaiser, S. Marras, E. Nadgorny, H. P. Strunk, and E. C. Aifantis
Works from 2000
Macrosegregation in quiescent melting and liquid-phase sintering, T. H. Courtney, Y. Du, and S. Z. Lu
Eddy current separation of aluminum smelting by-products, J. Y. Hwang, R. C. Greenlund, M. Jeong, A. M. Hein, D. C. Popko, R. Peterson, and R. McChesney
Works from 1999
Instability of gradient dependent elasto-viscoplasticity for clay, E. C. Aifantis, F. Oka, A. Yashima, and T. Adachi
Depression of pyrite flotation by yeast and bacteria, S. K. Kawatra and T. C. Eisele
Coherency strain-induced ordering in substitutional alloys, J. K. Lee
The impact of metals on society part IX: United States, R. L. Smith
Works from 1998
A molecular dynamics study on the liquid-amorphous-crystalline transition in a Lennard-Jonesian FCC system: I. Bulk crystal, H. K. Chang, S. G. Kim, B. Cheong, W. M. Kim, M. Chung, T. S. Lee, and J. K. Lee
A molecular dynamics study on the liquid-amorphous-crystalline transition in a Lennard-Jonesian FCC system: II. Nanocrystalline plates, H. K. Chang, S. G. Kim, B. Cheong, W. M. Kim, M. Chung, T. S. Lee, and J. K. Lee
Misfit dislocation patterning in thin films, K. Cholevas, N. Liosatos, A. E. Romanov, M. Zaiser, and E. C. Aifantis
Preparation of spherical toner particles for atomic force microscopic studies of colloidal forces, J. Drelich, J. Nalaskowski, and J. D. Miller
Selective froth flotation of PVC from PVC/PET mixtures for the plastics recycling industry, J. Drelich, T. Payne, J. H. Kim, J. D. Miller, R. Kobler, and S. Christiansen
Laboratory baffled-column flotation of mixed Campbell Eagle seam bituminous coal, T. C. Eisele, K. J. Shoop, S. J. Ripke, and T. C. Rao
A macrocomposite al brake rotor for reduced weight and improved performance, Xiaodi Huang and Kip Paxton
Ferrobasalts from the Central Indian Ocean Basin, S. D. Iyer, R. Mukhopadhyay, and D. C. Popko
On-line measurement of slurry rheology in a thickener at a copper concentrator, S. K. Kawatra and A. K. Bakshi
Binding iron ore pellets with fluidized-bed combustor fly ash, S. K. Kawatra, T. C. Eisele, and D. D. Banerjee
Dynamic interaction between a coherent precipitate and an edge dislocation, Jong K. Lee
Structural Features of Low-Temperature LiCoO < inf> 2 and Acid-Delithiated Products, Y. Shao-Horn, S. A. Hackney, C. S. Johnson, A. J. Kahaian, and M. M. Thackeray
Impact of metals on society part II: Ancient conflict, Raymond L. Smith
The impact of metals on society part I: Antiquity, Raymond L. Smith
The impact of metals on society: Part IV: Rome, R. L. Smith
The impact of metals on society Part V: Spain to 1500, R. L. Smith
Works from 1997
The mechanical properties of in-situ composites, R. M. Aikin
The fatigue resistance of TiAl-based alloys, Kwai S. Chan
Macrosegregation in directionally solidified dendritic alloys, R. N. Grugel and L. N. Brush
Dendrite fragmentation and the effects of fluid flow in castings, A. Hellawell, S. Liu, and S. Z. Lu
Replacing Al powder with Al slag or recycled foil in cellular concrete, Jiann Yang Hwang and X. Michael Song
Minimization of hexavalent chromium in magnesite-chrome refractory, Y. Lee and C. L. Nassaralla
Consolidation of nanostructured metal powders by rapid forging: Processing, modeling, and subsequent mechanical behavior, G. R. Shaik and W. W. Milligan
Effect of rock breakage characteristics and fines/clay content on the autogenous grinding of iron ore, K. J. Shoop and S. K. Kawatra
Plastic deformation of hafnium under uniaxial compression, G. Subhash, G. Ravichandran, and B. J. Pletka
Works from 1996
Rapid determination of non-Newtonian flow behavior in mineral suspensions, A. K. Bakshi and S. K. Kawatra
The fracture resistance and crack-tip micromechanics of in-situ intermetallic composites, Kwai S. Chan and David L. Davidson
Gravitational effects on microstructural development in liquid phase sintered materials, T. H. Courtney
Process modeling of the mechanics of mechanical alloying, T. H. Courtney and D. Maurice
Cracks in gradient elastic bodies with surface energy, G. Exadaktylos, I. Vardoulakis, and E. C. Aifantis
Screw dislocation near a triple junction of phases with different elastic moduli: I. General solution, M. Yu Gutkin, A. E. Romanov, and E. C. Aifantis
Nonlinear effects in periodic surface limited grain growth, S. A. Hackney
Periodic behavior in surface limited grain growth, S. A. Hackney
Some consequences of thermosolutal convection: The grain structure of castings, G. Hansen, A. Hellawell, S. Z. Lu, and R. S. Steube
Effect of viscosity on the cut (d50 ) size of hydrocyclone classifiers, S. K. Kawatra, A. K. Bakshi, and M. T. Rusesky
On-line Measurement of Viscosity and Determination of Flow Types for Mineral Suspensions, S. Komar Kawatra and A. K. Bakshi
Rheological Characterization of Mineral Suspensions using a Vibrating Sphere and a Rotational Viscometer, S. Komar Kawatra, A. K. Bakshi, and T. E. Miller
A study on coherency strain and precipitate morphology via a discrete atom method, Jong K. Lee
Effects of applied stress on coherent precipitates via a discrete atom method, Jong K. Lee
Kinetics of water vapor reactions with intergranular fracture surfaces of Ni3Al with and without boron, K. H. Lee, J. T. Lukowski, and C. L. White
Film thickness change due to grain boundary migration in stressed thin films at elevated temperatures, T. M. Lillo, M. R. Plichta, and S. A. Hackney
Milling dynamics: Part. II. dynamics of a SPEX mill and a one-dimensional mill, D. Maurice and T. H. Courtney
Milling dynamics: Part. III. integration of local and global modeling of mechanical alloying devices, D. Maurice and T. H. Courtney
Microconstituent development and coarsening in certain three-phase systems, G. C. Mukira and T. H. Courtney
On the modelling of diffusion bonding in materials: Superplastic Super Alpha-2, J. Pilling, N. Ridley, and M. F. Islam
Mathematically modeling mesoscale microstructural evolution, Bruce Pletka and Long Qing Chen
The recycling of magnesium makes ¢ents, Lisabeth Riopelle
In Situ Immobilization of Heavy Metals Associated with Uranium Leach Mines by Bacterial Sulfate Reduction, John L. Uhrie, James I. Drever, Patricia J.S. Colberg, and Carl C. Nesbitt
Works from 1995
Glasslike behavior in a nanostructured Fe/Cu alloy, J. E. Carsley, W. W. Milligan, S. A. Hackney, and E. C. Aifantis
A Simple, Mixtures-Based Model for the Grain Size Dependence of Strength in Nanophase Metals, J. E. Carsley, J. Ning, Walter W. Milligan, Stephen A. Hackney, and Elias C. Aifantis
The effects of ball size distribution on attritor efficiency, T. M. Cook and T. H. Courtney
The Nucleation and Growth of Graphite-The Modification of Cast Iron, D. D. Double and Angus Hellawell
Letters to the editor, Seth Elliot, Jay Pruce, Kevin Marsden, Jorge Luis González-Velázquez, Gustavo Díaz, Jeanie Shannon, Lloyd A. Heldt, and David R. Forrest
Disciplinary Patterns in Degrees, Faculty and Research Funding, Richard W. Heckel
The effect of particle size and volume fraction on the aging behavior of a liquid-phase sintered SiC/aluminum composite, G. M. Janowski and B. J. Pletka
Cavitation Erosion and Abrasive wear of Ni3 Al Alloys, M. L. Johnson, Donald E. Mikkola, and R. N. Wright
Observation and Measurement of Grain Rotation and Plastic Strain in Nanostructured Metal Thin Films, M. Ke, Stephen A. Hackney, Walter W. Milligan, and Elias C. Aifantis
Coherency strain analyses via a discrete atom method, Jong K. Lee
Intrinsic ductility of Ni3Al with and without boron at 77K, K. H. Lee and C. L. White
Strain rate effect on moisture and hydrogen-induced environmental embrittlement of Ni3Al with and without boron, K. H. Lee and C. L. White