Works from 1985
Stress corrosion cracking of alpha-beta brass in distilled water and sodium sulfate solutions, M. B. Hintz, L. J. Nettleton, and L. A. Heldt
Embrittlement of austempered nodular irons: Grain boundary phosphorus enrichment resulting from precipitate decomposition, R. C. Klug, M. B. Hintz, and K. B. Rundman
Growth Mechanisms of Silicon in Al-Si Alloys, Shu Zu Lu and Angus Hellawell
The influence of strain rate and porosity on the deformation and fracture of titanium and nickel, P. E. Magnusen, P. S. Follansbee, and D. A. Koss
The effect of heat treatment, mechanical deformation, and alloying element additions on the rate of bainite formation in austempered ductile irons, D. J. Moore, T. N. Rouns, and K. B. Rundman
The dependence of yield strength on lamellar termination density in Co-CoAl eutectic alloys, T. A. Wall, W. W. Predebon, and B. J. Pletka
Substructural Strengthening in Molybdenum and Mo-33Re, R. N. Wright, J. A. Brusso, and D. E. Mikkola
High strain rate deformation of Mo and Mo-33re by shock loading: Part I. Substructure development, R. N. Wright and D. E. Mikkola
The influence of multiaxial states of stress on the hydrogen embrittlement of zirconium alloy sheet, Fan Yunchang and D. A. Koss
Works from 1984
Hydrogen embrittlement of titanium sheet under multiaxial states of stress, R. J. Bourcier and D. A. Koss
Deformation and fracture at isolated holes in plane-strain tension, R. J. Bourcier, R. E. Smelser, O. Richmond, and D. A. Koss
An atomistic study of grain boundary segregation and cracking, H. K. Chang, R. S. Weidman, and J. K. Lee
Fabricability of and microstructural development in cold worked metal matrix composites, P. D. Funkenbusch, T. H. Courtney, and D. G. Kubisch
SOLIDIFICATION OF MONOTECTIC ALLOYS - MICROSTRUCTURES AND PHASE SPACINGS., R. N. Grugel, T. A. Lograsso, and A. Hellawell
Influence of crystallography upon critical nucleus shapes and kinetics of homogeneous f.c.c.-f.c.c. nucleation-V. The origin of GP zones in AlAg and AlCu alloys, F. K. LeGoues, R. N. Wright, Y. W. Lee, and H. I. Aaronson
Temperature Gradient Zone Melting: Approach to Steady State, T. A. Lograsso and A. Hellawell
Modeling degradation and failure of Ni-Cr-Al overlay coatings, J. A. Nesbitt and R. W. Heckel
Further Studies on the use of Classifiers for the Control of Wet Grinding Circuits, R. A. Seitz and S. Komar Kawatra
Works from 1983
Computer generation of phase diagrams and the associated free energy curves for a binary system, Robert M. Aikin and Jong K. Lee
Deformation and fracture of strongly textured Ti alloy sheets in uniaxial tension, K. S. Chan and D. A. Koss
Stretch forming and fracture of strongly textured Ti alloy sheets, K. S. Chan and D. A. Koss
Chemical state investigation of grain boundry segregated sulfur in polycrystalline nickel, M. B. Hintz, L. A. Heldt, S. P. Clough, and J. F. Moulder
A dislocation model for the plastic relaxation of the transformation strain energy of a misfitting spherical particle, W. C. Johnson and J. K. Lee
The effect of hydrogen on the multiaxial stress-strain behavior of titanium tubing, C. W. Lentz, D. A. Koss, M. G. Stout, and S. S. Hecker
On the concept of a time-dependent theoretical strength for materials, D. E. Mikkola
Settling in solid-liquid systems with specific application to liquid phase sintering, A. N. Niemi and T. H. Courtney
Works from 1982
A metallographic study of the erosion of α-Fe by rough spherical alumina particles, A. M. Abdel-Latif and J. W. Edington
A "Fracture limit diagram" for determining hydrogen embrittlement of sheet under multiaxial loading conditions, R. J. Bourcier and D. A. Koss
Basic Research Needs and Opportunities at the Solid-Liquid Interface, F. A. Cafasso, J. O.M. Bockris, S. G. Davison, T. E. Furtak, Lloyd A. Heldt, M. L. Knotek, J. J. Truhan, J. R. Weeks, and L. J. Wittenberg
Observations of fracture surface chemistry on Cu-0.5 At. % Sb bicrystals, T. H. Chuang, W. Gust, L. A. Heldt, M. B. Hintz, S. Hofmann, R. Lučić, and B. Predel
Trends in Publishing in Materials Science, 1962–1981, Thomas H. Courtney
Lattice dynamics studies of grain boundary structures. II. Thermodynamic functions, Y. Y. Earmme, J. K. Lee, Ralph J. Harrison, and George H. Bishop
Enhancement of coupled growth of off-eutectic alloys by "stop-and-go" technique, S. S. Frydman and T. H. Courtney
The Influence of Grain Boundary Phosphorus Concentration on Liquid Metal and Hydrogen Embrittlement of Monel 400, A. W. Funkenbusch, L. A. Heldt, and D. F. Stein
The occurrence of aligned microstructures in directionally solidified aluminum-bismuth alloys, R. N. Grugel and A. Hellawell
Measurement of the grain boundary diffusion of In in Ni bicrystals by the SIMS technique, W. Gust, M. R Hintz, A. Lodding, H. Odelius, and B. Predel
An integral equation approach to the elastic interaction of two precipitates, W. C. Johnson and J. K. Lee
Dislocation substructures in doped sapphire (α-Al < inf> 2 O < inf> 3 ) deformed by basal slip, B. J. Pletka, T. E. Mitchell, and A. H. Heuer
Fracture in Equiaxed Two Phase Alloys: Part I. Fracture in Alloys with Isolated Elastic Particles, M. A. Przystupa and T. H. Courtney
Fracture in equiaxed two phase alloys: part ii. fracture in alloys with isolated plastic particles, M. A. Przystupa and T. H. Courtney
The effect of mold precession on channel and macro-segregation in ammonium chloride-water analog castings, Alex Sample and Angus Hellawell
Deformation twinning: Time dependence and associated strengthening effects in shock-loaded Cu-8.7at.%Ge, R. N. Wright and D. E. Mikkola
Works from 1981
Amorphisation of Pu5Ga3 by Neutron Irradiation, R. O. Elliott and D. A. Koss
Influence of Structure on the Properties of an Amorphous U Fe Alloy, R. O. Elliott, J. L. Smith, R. S. Finocchiaro, and D. A. Koss
Microstructural strengthening in cold worked in situ Cu-14.8 Vol. % Fe composites, P. D. Funkenbusch and T. H. Courtney
Alloy solidification in systems containing a liquid miscibility gap, Richard N. Grugel and Angus Hella Well
Alloy solidification in systems containing a liquid miscibility gap, A. Hellawell
On the evaluation of the molar regular solution constant, Y. W. Lee, K. C. Russell, and H. I. Aaronson
Microstructural development and evolution in liquid-phase sintered Fe-Cu alloys, A. N. Niemi and T. H. Courtney
Comments on "the thermodynamics of cluster formation in nucleation theory", Kazumi Nishioka and Kenneth C. Russell
A re-assessment of the comparison of classical homogeneous nucleation theory and experiment in CuCo alloys, G. J. Shiflet, Y. W. Lee, H. I. Aaronson, and K. C. Russell
Impending Engineering Shortage: Consequences for Education and Industry, D. F. Stein
A mathematical model for internal oxidation, K. M. Vedula, A. W. Funkenbusch, and R. W. Heckel
Works from 1980
The oxidation behavior of aluminide-coated γ′/δ directional eutectics, H. C. Bhedwar, R. W. Heckel, and D. E. Laughlin
Fracture Toughness of Widmanstatten Colonies of an α-β Titanium Alloy, K. S. Chan and D. A. Koss
Kaufman Approach Calculations of Partial Phase Diagrams amongst Th, U, Np and Pu, K. S. Chan, Jong K. Lee, and H. I. Aaronson
An analysis for estimating the probability of particle coalescence in liquid phase sintered systems, T. H. Courtney and J. K. Lee
Microstructural changes as a result of temperature gradients in the Al-Al < inf> 3 Ni eutectic, J. R. Davies, T. H. Courtney, and M. A. Przystupa
Lattice dynamics studies of grain boundary structures. I. Method and application to stability, Y. Y. Earmme, J. K. Lee, Ralph J. Harrison, and George H. Bishop
Observations on the effect of calcium segregation on the fracture behaviour of polycrystalline alumina, R. S. Jupp, D. F. Stein, and D. W. Smith
Plastic relaxation of the transformation strain energy of a misfitting spherical precipitate: Ideal plastic behavior, J. K. Lee, Y. Y. Earmme, H. I. Aaronson, and K. C. Russell
Anisotropy of coherent interphase boundary energy, Y. W. Lee and H. I. Aaronson
Surface concentration profile and surface energy in binary alloys, Y. W. Lee and H. I. Aaronson
Lattice instability theory of fracture, K. Nishioka, S. Nakamura, T. Shimamoto, and H. Fujiwara
The interaction between deformation, fracture initiation and fracture propagation in two phase Co-CoAl alloys, M. A. Przystupa, M. G. Stout, and T. H. Courtney
Works from 1979
Discussion of a series of papers on the structure of interphase boudaries in brass, W. A.T. Clark, A. Guha, H. I. Aaronson, and J. M. Rigsbee
The influence of microstructure on fracture of drawn tungsten wire, A. W. Funkenbusch, F. Bacon, and D. Lee
Elastic interaction energy of two spherical precipitates in an anisotropic matrix, William C. Johnson and Jong K. Lee
Reply to "On the shape of grain boundary grooves at a solid/liquid interface", Jong K. Lee
Surface segregation and bond strength-atomic size representation, Jong K. Lee
Precipitation mechanisms in α < inf> m Ti-X alloys and the meyrick theory of cellular reaction initiation, M. R. Plichta, H. I. Aaronson, J. C. Williams, and G. W. Franti
A Correlation of Catalytic Behaviour with Electronic Structure, Lattice Structure and Surface Composition in Powdered Alloys from the Pseudobinary Systems CeRh3-x Pdx and ZrRh3-x Pdx, J. M. Pountney, I. R. Harris, J. M. Winterbottom, and J. F. Smith
A computer modeling study of partially coherent f.c.c.:b.c.c. boundaries, J. M. Rigsbee and H. I. Aaronson
The interfacial structure of the broad faces of ferrite plates, J. M. Rigsbee and H. I. Aaronson
Kinetics of coarsening by the ledge mechanism, G. J. Shiflet, H. I. Aaronson, and T. H. Courtney
Application of the Kaufman Approach to the Calculation of Intra-rare Earth Phase Diagrams, G. J. Shiflet, Jong K. Lee, and H. I. Aaronson
Works from 1978
Precipitation at interphase boundaries, H. I. Aaronson, M. R. Plichta, G. W. Franti, and K. C. Russell
Comments on "A critique of the Ayres-Stein method of predicting cleavage planes in metals", R. A. Ayres, J. E. Hack, and D. F. Stein
Regular Solution Theory Calculation of the Congruent Transformation Point of a Solid Solution, B. W. Bennett, G. J. Shiflet, and Hubert I. Aaronson
Fatigue fracture and slip processes in B.C.C. TiV alloy single crystals, J. A. Carlson and D. A. Koss
Generalization of the nucleus shape-dependent parameters in the nucleation rate equation, Kwai S. Chan, J. K. Lee, G. J. Shiflet, K. C. Russell, and H. I. Aaronson
Influence of interphase boundary structure upon the mechanism of eutectoid decomposition in a Ti-Ni alloy, T. P. Diebold, H. I. Aaronson, and G. W. Franti
Cavitation-Induced erosion of Ti-6Al-4V, D. Essenmacher, M. F. Prezkop, D. E. Mikkola, and D. A. Koss
A survey of eutectoid decomposition in ten Ti-X systems, G. W. Franti, J. C. Williams, and H. I. Aaronson
Low-Cycle fatigue crack nucleation and early growth in Ti-17, A. W. Funkenbusch and L. F. Coffin
Structure-property relations in a metastable β Ti alloy containing Si, D. E. Graham and D. A. Koss
Foreword - Carburizing and nitriding: Fundamentals, processes, and properties, R. W. Heckel
Shock hardening behavior of Cu-8.7Ge at very short pulse durations, S. LaRouche and D. E. Mikkola
Determination of solid/liquid interface energy with the Arbel-Cahn method, Jong K. Lee
Calculation of the elastic strain field of a cuboidal precipitate in an anisotropic matrix, Jong K. Lee and William C. Johnson
Re-examination of the elastic strain energy of an incoherent ellipsoidal precipitate, Jong K. Lee and William C. Johnson
The thermodynamics and kinetics of the β → α < inf> m transformation in three Ti-X systems, M. R. Plichta, H. I. Aaronson, and J. H. Perepezko
Fatigue Crack Propagation in Single Crystal and Polycrystalline, age-hardenable TiV Alloys, G. W. Salgat and D. A. Koss
A re-examination of the thermodynamics of the proeutectoid ferrite transformation in Fe-C alloys, G. J. Shiflet, J. R. Bradley, and H. I. Aaronson
Structure/property/continuum synthesis of ductile fracture in inconel alloy 718, M. G. Stout and W. W. Gerberich
On the origin of microcracking behind a crack tip, M. G. Stout and D. A. Koss
Works from 1977
Comments on "reply to discussion on 'the growth kinetics of plate-shaped precipitates'", H. I. Aaronson
Discussion of "on the growth kinetics of plate-shaped precipitates in aluminum-copper and aluminum-gold alloys" by Y.H. Chen and R.D. Doherty, H. I. Aaronson
Comments "on the generation of an orientation relationship during nucleation in precipitation processes", H. I. Aaronson, D. W. Dooley, and K. C. Russell
Growth mechanisms of AuCu II plates, H. I. Aaronson and K. R. Kinsman