Works from 1992
Isostatic diffusion bonding of superplastic Ti6Al4V, M. T. Salehi, J. Pilling, N. Ridley, and D. L. Hamilton
Ab initio electronic structure of superionic conductor Li < inf> 3 P, Max Seel and Ravindra Pandey
Specimen thickness effects on caustics, T. W. Webb, T. Vandenbrink, E. I. Meletis, and E. C. Alfantis
Phase stability, microstructures and cracking susceptibilities of AlMiTi alloys near Al3Ti, S. Zhang and D. E. Mikkola
APB vs. SISF dissociation of superdislocations in cubic L12 Al3Ti alloys, S. Zhang, D. E. Mikkola, and W. W. Milligan
Works from 1991
Kinetic equations for concurrent size and shape coarsening by the ledge mechanism, R. M. Aikin, S. Elangovan, T. G. Zocco, and M. R. Plichta
Grain boundary cohesion and fracture in ordered intermetallics, E. P. George, C. L. White, and J. A. Horton
Morphological instabilities and branching processes at the initiation of the eutectoid transformation, S. A. Hackney
On grain boundary dissociation during diffusion (and stress) induced grain boundary migration, S. A. Hackney
On the linear instability of the rayleigh spheroidization process, S. A. Hackney
A new In Situ Technique for Studying Deformation and Fracture in Thin Film Ductile/Brittle Laminates, Stephen A. Hackney and Walter W. Milligan
Effect of environment on the mechanical properties of an Fe-24.6Al alloy, D. B. Kasul and L. A. Heldt
Fracture strength of low-pressure injection-moulded reaction-bonded silicon nitride, S. J. Kwak, E. Krug, and S. C. Danforth
Equilibrium shape and heterogeneous nucleation barrier at spherical interfaces, J. K. Lee, J. H. Choy, and Y. Choi
Computer simulation of the effect of coherency strain on cluster growth kinetics, Jong K. Lee
On the Origins of Ghost Boundaries during in situ Strain-Induced Grain-Boundary Migration, T. M. Lillo, Stephen A. Hackney, and Mark R. Plichta
Determination of liquid diffusion coefficients along a liquidus phase boundary, T. A. Lograsso and A. Hellawell
Effects of alloy composition on environmental embrittlement of B2 ordered iron aluminides, R. J. Lynch, L. A. Heldt, and W. W. Milligan
The mechanisms and temperature dependence of superlattice stacking fault formation in the single-crystal superalloy PWA 1480, Walter W. Milligan and Stephen D. Antolovich
Oxidation behavior of cubic phases formed by alloying Al3Ti with Cr and Mn, L. J. Parfitt, J. L. Smialek, J. P. Nic, and D. E. Mikkola
Shock deformation of sapphire single crystals, Y. Wang and D. E. Mikkola
Transient liquid-phase sintering of ceramic-reinforced Fe-based composites, S. J. Yankee and B. J. Pletka
Works from 1990
Concurrent size and shape coarsening of γ′ in AlAg, R. M. Aikin and M. R. Plichta
Influence of the Austenite Retained in the Hydrogen Embrittlement in AISI 4340, C. Andreone and Aldo Murut
An auger spectrometric study of the crack tip surface chemistry for liquid metal embrittlement: Beta brass embrittled by gallium, P. H. Au-Yeung, J. T. Lukowski, L. A. Heldt, and C. L. White
Grain Boundary Structural Disruption Under Thermal Stress, Stephen A. Hackney and T. Lillo
Experimental Observations on Epitaxial NiSi2 Islands on 〈111〉 Oriented Si, Stephen A. Hackney and R. Lynch
The influence of interfacial structure on the mechanical properties of liquid-phase-sintered aluminum-ceramic composites, G. M. Janowski and B. J. Pletka
Plastic relaxation of thermoelastic stress in aluminum/ceramic composites, C. T. Kim, J. K. Lee, and M. R. Plichta
Elastic strain energy of deformation twinning in tetragonal crystals, J. K. Lee and M. H. Yoo
Direct Observations of Grain Boundary Dislocation Motion due to Thermal Stresses, T. M. Lillo, Mark R. Plichta, and Stephen A. Hackney
Discontinuous Crack Propagation in Ga Induced Liquid Metal Embrittlement of β-brass, John T. Lukowski, D. B. Kasul, Lloyd A. Heldt, and Calvin L. White
Observations on the Systematic Alloying of Al3Ti with Fourth Period Elements to Yield Cubic Phases, J. P. Nic, S. Zhang, and Donald E. Mikkola
Lab Report - The institute of materials processing at Michigan Technological University, K. L. Paxton and Christopher J. Kloecker
Influence of cobalt on the attritor milling efficiency of WC-Co powder blends, J. A. Payne, Darrell W. Smith, and T. E. Hale
Solidification in the system Al-Ge-Si: The phase diagram, coring patterns, eutectic growth, and modification, Hui Song and Angus Hellawell
On the Shape Change of a Nonequilibrium Faceted Microcrystal, Sang Ho Yu and Stephen A. Hackney
New cubic phases formed by alloying Al < inf> 3 Ti with Mn and Cr, S. Zhang, J. P. Nic, and Donald E. Mikkola
Temperature Dependence of the Compressive Strength of Cubic Phases formed by Alloying Al < inf> 3 Ti with Mn And Cr, S. Zhang, J. P. Nic, Walter W. Milligan, and Donald E. Mikkola
Works from 1989
The SCC of single crystals of β brass in water: Fractography and crystallography, W. K. Blanchard and L. A. Heldt
Experimental observations on the accomodation dislocation pattern for a low symmetry gradient orientation, S. A. Hackney
Grain size gradient nickel alloys II: Fatigue properties, Kee Ho Hwang, M. R. Plichta, and J. K. Lee
Two-dimensional finite difference analysis of shape instabilities in plates, J. K. Lee and T. H. Courtney
In-situ Observations of Intrinsic Grain Boundary Structure during Thermal Cycling, T. Lillo, Mark R. Plichta, and Stephen A. Hackney
Processing and properties of metal matrix composites containing discontinuous reinforcement, M. G. McKimpson and T. E. Scott
On the mechanism of cross slip in Ni3AI, Walter W. Milligan and Stephen D. Antolovich
The correlation between the temperature dependence of the CRSS and the formation of superlattice-lntrinsic stacking faults in the nickel-base superalloy PWA 1480, Walter W. Milligan and Stephen D. Antolovich
Superplasticity in aluminium base metal matrix composites, John Pilling
A discrete lattice plane analysis of the energy of coherent {0001}h.c.p. • {111}f.c.c. , 〈1120〉h.c.p. • 〈110〉f.c.c. interfaces, R. V. Ramanujan, J. K. Lee, F. K. Le Goues, and H. I. Aaronson
The growth of tubular or vermicular structures in organic monotectic systems, Hui Song and Angus Hellawell
Works from 1988
Dislocation generation in alumina deformed by impact loading, J. A. Brusso, D. E. Mikkola, J. E. Flinn, and P. V. Kelsey
Auger analysis of the fracture surfaces of ordered Ni < inf> 4 Mo, Ashok Choudhury, H. P. Kao, C. R. Brooks, and C. L. White
The Surface Morphology of Crystals Melting Under Solutions of Different Densities, Fang Dacheng and A. Hellawell
The influence of γ-γ′ eutectic on the mechanical properties of conventionally cast MAR-M247, K. L. Gasko, Gregg M. Janowski, and Bruce J. Pletka
A simple geometric method for the thermodynamics of metastable chemical vapor deposition, S. A. Hackney
Experimental observation of triple junction behavior during DIGM, S. A. Hackney
The effects of grain size gradients on the stability of thin films, S. A. Hackney
Grain boundary grooving at finite grain size, S. A. Hackney and G. C. Ojard
Porosity and tensile ductility in Al-Zn alloys, B. Harriprashad, T. H. Courtney, and J. K. Lee
Grain-size-gradient nickel alloys I: Fabrication and tensile properties, Kee Ho Hwang, M. R. Plichta, and J. K. Lee
Rheological Effects in Grinding Circuits, S. Komar Kawatra and Timothy C. Eisele
Effects of Temperature on Hydrocyclone Efficiency, S. Komar Kawatra, Timothy C. Eisele, D. Zhang, and M. Rusesky
An analysis for the effect of a grain size gradient on torsional and tensile properties, J. K. Lee, F. R. Ehrlich, L. A. Crall, and T. H. Collins
The prediction of precipitation strengthening in microalloyed steels, H. R. Lin and A. A. Hendrickson
The effect of void arrays on void linking during ductile fracture, P. E. Magnusen, E. M. Dubensky, and D. A. Koss
Some aspects of the massive transformation, E. S.K. Menon, M. R. Plichta, and H. I. Aaronson
Diffusional transport during the cyclic oxidation of γ+β, Ni-Cr-Al(Y, Zr) alloys, J. A. Nesbitt and R. W. Heckel
The Kinetics of Isostatic Diffusion Bonding in Superplastic Materials, John Pilling
The microstructure and mechanical properties of austempered ductile iron, K. B. Rundman, D. J. Moore, K. L. Hayrynen, W. J. Dubensky, and T. N. Rouns
Channel formation in Pb-Sn, Pb-Sb, and Pb-Sn-Sb alloy ingots and comparison with the system NH < inf> 4 CI-H < inf> 2 O, J. R. Sarazin and A. Hellawell
The Effect of Bubble Size Distribution on Selectivity of Iron Ore Flotation, Marian Szatkowski and Wilfred L. Freyberger
Determination of size distributions for rod-shaped particles, T. G. Zocco and M. R. Plichta
Works from 1987
Dissolution of Comminuted Magnesium Oxide as Affected by the Density of Dislocations Introduced by Various Comminution Methods, Nina F. Albanese-Kotar and D. E. Mikkola
Substructure Development in Shock-Loaded Cu-8.7 Ge and Copper: The Role of Temperature, Grain Size and Stacking Fault Energy, M. A. Crimp, B. C. Smith, and D. E. Mikkola
Effects of Molybdenum, Titanium and Silicon Additions on the Do 3 ⇄ B2 Transition Temperature for Alloys near Fe3 Al, R. T. Fortnum and D. E. Mikkola
Experimental indications of a low undercooling instability in the cellular mechanism of discontinuous precipitation, S. A. Hackney and F. S. Biancaniello
Interparticle spacings and undercoolings in Al-Si eutectic microstructures, L. M. Hogan and H. Song
High-Strain Deformation Processing of Ni W Alloys, Y. Leng, T. H. Courtney, and J. C. Malzahn Kampe
Effects of Alloying Additions of Titanium, Molybdenum, Silicon, Hafnium and Tantalum on the Microstructure of Iron Aluminides near Fe3 Al, H. P. Longworth and D. E. Mikkola
The mechanism of silicon modification in aluminum-silicon alloys: Impurity induced twinning, Shu Zu Lu and A. Hellawell
Interdiffusion in Ni-Rich, Ni-Cr-Al alloys at 1100 and 1200 °C: Part I. Diffusion paths and microstructures, J. A. Nesbitt and R. W. Heckel
Predicting diffusion paths and interface motion in γ/γ + β, Ni-Cr-Al diffusion couples, J. A. Nesbitt and R. W. Heckel
Interdiffusion in Ni-rich, Ni-Cr-Al alloys at 1100 and 1200 °C: Part II. Diffusion coefficients and predicted concentration profiles, J. A. Nesbitts and R. W. Heckel
Some comments on flotation kinetics, Marian Szatkowski
Works from 1986
The influence of porosity on the deformation and fracture of alloys, R. J. Bourcier, D. A. Koss, R. E. Smelser, and O. Richmond
Substructural Changes and Dislocation Generation Behavior as a Function of Pulse Duration in Mo-33Re Shocked at Low Temperature, J. A. Brusso, Richard N. Wright, and D. E. Mikkola
Measurement of the interledge spacing on ō′ precipitates in AlCu alloys, S. Elangovan and M. R. Plichta
Further observations of SCC in alpha-beta brass: Considerations regarding the appearance of crack arrest markings during SCC, M. B. Hintz, W. K. Blanchard, P. K. Brindley, and L. A. Heldt
The effects of tantalum on the microstructure of two polycrystalline nickel-base superalloys: B-1900 + Hf and MAR-M247, G. M. Janowski, R. W. Heckel, and B. J. Pletka
Elevated temperature microstructural stability of heavily cold-worked in situ composites, J. C.Malzahn Kampe and T. H. Courtney
The effect of stress state on the hydrogen embrittlement of nickel, S. L. Kampe and D. A. Koss
The processing and properties of heavily cold worked directionally solidified Ni-W eutectic alloys, D. G. Kubisch and T. H. Courtney
The Design Question-Part I at North Carolina State, G. L. Liedl and D. E. Mikkola
The Design Question - Part II, D. E. Mikkola
Discussion of a series of papers on the nucleation and growth kinetics, crystallography and mechanism of the massive transformation, mainly β → ζ < inf> m in Cu-23.7 A/O Ga, N. Nityanand, M. R. Plichta, and H. I. Aaronson
The effects of interstitials and hydrogen-interstitial interactions on low temperature hardening and embrittlement in V, Nb, and Ta, W. A. Spitzig, C. V. Owen, and T. E. Scott
Works from 1985
On the strength of heavily cold worked in situ composites, P. D. Funkenbusch and T. H. Courtney
The combined effect of stress state and grain size on hydrogen embrittlement of titanium, D. A. Gerard and D. A. Koss
A variation of the coagulation equation with applications in material sciences, John W. Hilgers, Robert J. Spahn, and Thomas H. Courtney
Stress corrosion cracking and crack tip adsorption: Considerations regarding the role of alloy dissolution products, M. B. Hintz