Works from 1995
Modification of Al-Si alloys: Microstructure, thermal analysis, and mechanisms, Shu Zu Lu and A. Hellawell
Using fractal analysis to describe irregular microstructures, Shu Zu Lu and Angus Hellawell
Modeling of mechanical alloying: Part II. Development of computational modeling programs, D. Maurice and T. H. Courtney
Modeling of mechanical alloying: Part III. Applications of computational programs, D. Maurice and T. H. Courtney
Local interface response to dislocation strain fields at the Al/SiO < inf> 2 and Al/C boundary region, E. D. McCarty and S. A. Hackney
Superplasticity in Al2O3 ZrO2 Al2 TiO5 ceramics, J. Pilling and James Payne
Strain-rate effects in high-purity alumina, James M. Staehler, William W. Predebon, Bruce J. Pletka, and Ghatu Subhash
The constitutive behavior of refractory metals as a function of strain rate, Ghatu Subhash
An analytical gradient plasticity solution for mode III, David J. Unger and Elias C. Aifantis
The asymptotic solution of gradient elasticity for mode III, David J. Unger and Elias C. Aifantis
Stand‐off positions and nonuniform distributions of misfit dislocations in heterophase systems, M. Yu. Gutkin, A. E. Romanov, and E. C. Aifantis
Works from 1994
The elastic strain energy of growth ledges on coherent and partially coherent precipitates, G. Chen, J. K. Chen, J. K. Lee, and W. T. Reynolds
Elevated-temperature stability of mechanically alloyed Cu-Nb powders, R. J. Comstock and T. H. Courtney
On the stand‐off positions of misfit dislocations, M. Yu Gutkin and A. E. Romanov
Edge instabilities in thin plates, S. A. Hackney
Current and Emerging Statistical Trends in Engineering Education, Richard W. Heckel
Synthesizing mullite from beneficiated fly ash, Jiann Yang Hwang, Xiaodi Huang, and Allison M. Hein
Phase stability in (Ni, Pt)3Al alloys, Janice L. Kamm and Walter W. Milligan
Embrittlement of B2 iron aluminide by water vapor and by hydrogen, D. B. Kasul and L. A. Heldt
Coherent Phase Equilibria: Effect of Composition-Dependent Elastic Strain, Jong K. Lee and Weimin Tao
An Application of Fractal Geometry to Complex Microstructures: Numerical characterization of graphite in cast irons, Shu zu Lu and Angus Hellawell
Environmental embrittlement of single crystal and thermomechanically processed B2-ordered iron aluminides, R. J. Lynch, K. A. Gee, and L. A. Heldt
Susceptibility of B2-ordered iron aluminides to moisture-induced embrittlement in oxygen and argon environments, R. J. Lynch, M. Harburn, L. Maucione, and L. A. Heldt
Effects of annealing temperature on the mechanical properties of an Fe-36% Al alloy, R. J. Lynch and L. A. Heldt
Modeling of mechanical alloying: Part I. deformation, coalescence, bdand fragmentation mechanisms, D. Maurice and T. H. Courtney
The morphological stability of lateral growth in solid-solid phase transformation during thin-film interdiffusion in Al/Cu bimetal films, E. D. McCarty and S. A. Hackney
Joining ODS materials for high-temperature applications, M. G. McKimpson and D. O'Donnell
Evolution of microstructure and shear-band formation in α-hcp titanium, M. A. Meyers, G. Subhash, B. K. Kad, and L. Prasad
Synthesis of CuNbC nanocomposites by mechanical alloying, B. R. Murphy and T. H. Courtney
The fracture toughness of a high-strength alumina: compact tension versus indentation fracture techniques, B. R. Murphy, W. W. Predebon, and B. J. Pletka
On the Nature of High Internal Stresses in Ultrafine Grained Materials, A. A. Nazarov, Alexey Romanov, and R. Z. Valiev
Microwave sintering of yttria-containing tetragonal zirconia polycrystal (Y-TZP) ceramics, D. S. Patil and B. C. Mutsuddy
Processing and properties of zirconia-toughened alumina ceramics, D. S. Patil and B. C. Mutsuddy
On the role of microstructure in the behavior of soils: Effects of higher order gradients and internal inertia, I. Vardoulakis and E. C. Alfantis
Thermal expansion and microstructures of melted Al2 O3 -ZrO2 -TiO2 ceramics, P. Virro-Nic and J. Pilling
Works from 1993
Modeling of particle size evolution during mechanical milling, B. J.M. Aikin and T. H. Courtney
The kinetics of composite particle formation during mechanical alloying, B. J.M. Aikin and T. H. Courtney
Introductory remarks to the viewpoint set on propagative plastic instabilities, Y. Estrin, L. P. Kubin, and E. C. Alfantis
Edge Instabilities in Thin Plates studied by In Situ Transmission Electron Microscopy, Stephen A. Hackney, T. M. Lillo, R. S. Kedia, Q. C. Horn, and Mark R. Plichta
Depression of Pyrite Flotation by Microorganisms as a Function of pH, S. K. Kawatra and T. C. Eisele
Edge instabilities in thin plates with spatial variations in thickness, R. S. Kedia, T. M. Lillo, Q. Horn, M. R. Plichta, and S. A. Hackney
Intergranular fracture of polycrystalline Ni3Al at 77K, K. H. Lee and C. L. White
Evaluating the mechanical properties of commercial DRA, Marvin G. McKimpson, Eric L. Pohlenz, and Steven R. Thompson
In situ studies of deformation and fracture in nanophase materials, Walter W. Milligan, S. A. Hackney, M. Ke, and E. C. Alfantis
Thermodynamic activity of antimony at dilute solutions in carbon-saturated liquid iron, C. L. Nassaralla and E. T. Turkdogan
The effects of fuel sulfur concentration on regulated and unregulated heavy-duty diesel emissions, Cornelius N. Opris, Linda D. Gratz, Susan T. Bagley, Kirby J. Baumgard, David G. Leddy, and John H. Johnson
Segregation to Fiber/Matrix Interfaces in Ni3Al IMCs Reinforced with Single Crystal Al2O3 Fibers, Dominik Ringer and Calvin L. White
Milling dynamics: Part I. Attritor dynamics: Results of a cinematographic study, R. W. Rydin, D. Maurice, and T. H. Courtney
Design education in metallurgical and materials engineering, Mark E. Schlesinger and Donald E. Mikkola
Deformation and fracture in directionally solidified Co-CoAl eutectic, A. V. Shah, W. W. Predebon, and B. J. Pletka
Ductilization of Ti-Ni-Pd shape memory alloys with boron additions, Weon Sik Yang and D. E. Mikkola
Effect of plasma spray processing variations on particle melting and splat spreading of hydroxylapatite and alumina, S. J. Yankee and B. J. Pletka
Works from 1992
On the structure of the mode III crack-tip in gradient elasticity, S. B. Altan and E. C. Alfantis
Foreword, Iver E. Anderson, Enrique J. Lavernia, and Walter A. Johnson
Fabrication of metal matrix composites of, Y. Choi, M. E. Mullins, K. Wijayatilleke, and J. K. Lee
The intergranular segregation of boron in Ni3 Al: Equilibrium segregation and segregation kinetics, A. Choudhury, C. L. White, and C. R. Brooks
Experimental observations on θ phase growth morphology during interdiffusion at the Al/Cu interface, S. A. Hackney
Computer generation of binary and ternary phase diagrams via a convex hull method, D. D. Lee, J. H. Choy, and J. K. Lee
The Cd-Cr system (cadmium-chromium), Z. Moser and L. A. Heldt
The Cr-Zn (chromium-zinc) system, Z. Moser and L. A. Heldt
Structure/property observations for AlTiCr alloys near the cubic (Al,Cr)3 Ti phase, J. P. Nic, J. L. Klansky, and D. E. Mikkola
Investigation on some ceramic materials for electrochemical device applications, D. S. Patil, N. Venkatramani, V. K. Rohatgi, and B. C. Mutsuddy
A discrete lattice plane analysis of the composition profile and surface energy of binary H.C.P. alloys with applications to γ AlAg, R. V. Ramanujan, H. I. Aaronson, J. K. Lee, and R. W. Hyland
A discrete lattice plane analysis of the interfacial energy of coherent F.C.C.: H.C.P. interfaces and its application to the nucleation of γ in AlAg alloys, R. V. Ramanujan, J. K. Lee, and H. I. Aaronson
Isostatic diffusion bonding of superplastic Ti6Al4V, M. T. Salehi, J. Pilling, N. Ridley, and D. L. Hamilton
Ab initio electronic structure of superionic conductor Li < inf> 3 P, Max Seel and Ravindra Pandey
Specimen thickness effects on caustics, T. W. Webb, T. Vandenbrink, E. I. Meletis, and E. C. Alfantis
Phase stability, microstructures and cracking susceptibilities of AlMiTi alloys near Al3Ti, S. Zhang and D. E. Mikkola
APB vs. SISF dissociation of superdislocations in cubic L12 Al3Ti alloys, S. Zhang, D. E. Mikkola, and W. W. Milligan
Works from 1991
Kinetic equations for concurrent size and shape coarsening by the ledge mechanism, R. M. Aikin, S. Elangovan, T. G. Zocco, and M. R. Plichta
Grain boundary cohesion and fracture in ordered intermetallics, E. P. George, C. L. White, and J. A. Horton
Morphological instabilities and branching processes at the initiation of the eutectoid transformation, S. A. Hackney
On grain boundary dissociation during diffusion (and stress) induced grain boundary migration, S. A. Hackney
On the linear instability of the rayleigh spheroidization process, S. A. Hackney
A new In Situ Technique for Studying Deformation and Fracture in Thin Film Ductile/Brittle Laminates, Stephen A. Hackney and Walter W. Milligan
Effect of environment on the mechanical properties of an Fe-24.6Al alloy, D. B. Kasul and L. A. Heldt
Fracture strength of low-pressure injection-moulded reaction-bonded silicon nitride, S. J. Kwak, E. Krug, and S. C. Danforth
Equilibrium shape and heterogeneous nucleation barrier at spherical interfaces, J. K. Lee, J. H. Choy, and Y. Choi
Computer simulation of the effect of coherency strain on cluster growth kinetics, Jong K. Lee
On the Origins of Ghost Boundaries during in situ Strain-Induced Grain-Boundary Migration, T. M. Lillo, Stephen A. Hackney, and Mark R. Plichta
Determination of liquid diffusion coefficients along a liquidus phase boundary, T. A. Lograsso and A. Hellawell
Effects of alloy composition on environmental embrittlement of B2 ordered iron aluminides, R. J. Lynch, L. A. Heldt, and W. W. Milligan
The mechanisms and temperature dependence of superlattice stacking fault formation in the single-crystal superalloy PWA 1480, Walter W. Milligan and Stephen D. Antolovich
Oxidation behavior of cubic phases formed by alloying Al3Ti with Cr and Mn, L. J. Parfitt, J. L. Smialek, J. P. Nic, and D. E. Mikkola
Shock deformation of sapphire single crystals, Y. Wang and D. E. Mikkola
Transient liquid-phase sintering of ceramic-reinforced Fe-based composites, S. J. Yankee and B. J. Pletka
Works from 1990
Concurrent size and shape coarsening of γ′ in AlAg, R. M. Aikin and M. R. Plichta
Influence of the Austenite Retained in the Hydrogen Embrittlement in AISI 4340, C. Andreone and Aldo Murut
An auger spectrometric study of the crack tip surface chemistry for liquid metal embrittlement: Beta brass embrittled by gallium, P. H. Au-Yeung, J. T. Lukowski, L. A. Heldt, and C. L. White
Grain Boundary Structural Disruption Under Thermal Stress, Stephen A. Hackney and T. Lillo
Experimental Observations on Epitaxial NiSi2 Islands on 〈111〉 Oriented Si, Stephen A. Hackney and R. Lynch
The influence of interfacial structure on the mechanical properties of liquid-phase-sintered aluminum-ceramic composites, G. M. Janowski and B. J. Pletka
Plastic relaxation of thermoelastic stress in aluminum/ceramic composites, C. T. Kim, J. K. Lee, and M. R. Plichta
Elastic strain energy of deformation twinning in tetragonal crystals, J. K. Lee and M. H. Yoo
Direct Observations of Grain Boundary Dislocation Motion due to Thermal Stresses, T. M. Lillo, Mark R. Plichta, and Stephen A. Hackney
Discontinuous Crack Propagation in Ga Induced Liquid Metal Embrittlement of β-brass, John T. Lukowski, D. B. Kasul, Lloyd A. Heldt, and Calvin L. White
Observations on the Systematic Alloying of Al3Ti with Fourth Period Elements to Yield Cubic Phases, J. P. Nic, S. Zhang, and Donald E. Mikkola
Lab Report - The institute of materials processing at Michigan Technological University, K. L. Paxton and Christopher J. Kloecker
Influence of cobalt on the attritor milling efficiency of WC-Co powder blends, J. A. Payne, Darrell W. Smith, and T. E. Hale
Solidification in the system Al-Ge-Si: The phase diagram, coring patterns, eutectic growth, and modification, Hui Song and Angus Hellawell