Works from 1991
On the geometry of slip and spin in finite plastic deformation, N. Aravas and E. C. Alfantis
Effects of a catalyzed diesel particle filter on the chemical and biological character of emissions from a diesel engine used in underground mines, S. T. Bagley, K. J. Baumgard, L. D. Gratz, K. L. Bickel, and W. F. Watts
An infrared telemetry technique for making piston temperature measurements, G. L. Barna, D. B. Brumm, and C. L. Anderson
The theoretical development of vehicle engine cooling airflow models using incompressible flow methods, Xintai Chang, Edward C. Chiang, and John H. Johnson
The dimensionless correlation of airflow for vehicle engine cooling systems, Xintai Chang, Edward C. Chiang, John H. Johnson, and S. L. Yang
Thermoviscoplastic Shear Instability and Higher Order Strain Gradients, Nicolas Charalambakis and Elias C. Aifantis
Bias Errors in Estimating Frequency Response and Coherence Functions from Truncated Transient Signals, Harold A. Evensen and M. W. Trethewey
The effect of a ceramic particulate trap on the particulate and vapor phase emissions of a Heavy-Duty Diesel Engine, L. D. Gratz, S. T. Bagley, K. S. King, K. J. Baumgard, D. G. Leddy, and J. H. Johnson
Energy dissipation and associated failure modes when axially loading polygonal thin-walled cylinders, A. G. Mamalis, D. E. Manolakos, A. K. Baldoukas, and G. L. Viegelahn
On the length of crack advance during hydrogen-assisted cracking, E. I. Meletis and E. C. Alfantis
A photoelastic and FEM analysis of interfacial crack propagation, I. Miskioglu, C. R. Villmann, J. S. Pawloski, and D. M. Pariseau
A Variational Principle for Gradient Plasticity, H. B. Mühlhaus and E. C. Alfantis
Pressure driven flow of pure vapor undergoing laminar film condensation between parallel plates, Amitabh Narain and Y. Kizilyalli
Heat Transfer Enhancement of Laminar and Turbulent Pipe Flow via Corona Discharge, M. M. Ohadi, D. A. Nelson, and S. Zia
Measurement of shear band characteristics in low carbon steel using photoelasticity, G. L. Panger, J. L. Ding, H. M. Zbib, and E. C. Alfantis
Alternative Formulation of Non-Stationary Behavior, G. Treviño
Works from 1990
Laminar flow and heat transfer in a finned tube annulus, Ajay K. Agrawal and Subrata Sengupta
The dimensionality of the modal equations, A. E. Anuta
On stress controlled thermoviscoplastic shearing and higher order strain gradients, N. Charalambakis and E. C. Aifantis
On the problem of shear instability of a finite thermoviscoplastic slab: A gradient approach, Nicolas Ch Charalambakis and Elais C. Aifantis
A one-dimensional transient compressible flow model for cooling airflow rate computation, Edward C. Chiang, George P.C. Huang, Zintai Chang, and John H. Johnson
The thermostat characteristics and its effect on low-flow engine cooling system performance, Edward C. Chiang and John R. Keller
On the microscopic origin of the plastic spin, Y. F. Dafalias and E. C. Aifantis
Possible Role of Deformation‐Induced Point Defects in Dislocation Patterning, Y. Estrin, C. Abromeit, and E. C. Aifantis
Solute distribution in crack tips under mixed mode I/II conditions, E. E. Gdoutos and E. C. Aifantis
A note on the paper "On the Thermodynamic Theory of Fluid Interfaces: Infinite Intervals, Equilibrium Solutions, and Minimizers", K. Kuttler and Elias C. Aifantis
Bending of fibre-reinforced composite thin-walled tubes, A. G. Mamalis, D. E. Manolakos, G. L. Viegelahn, and A. K. Baldoukas
Electrostatic effects on pressure drop in tube flows, D. A. Nelson, M. M. Ohadi, S. Zia, and R. L. Whipple
Effect of a 180° Bend on Heat Transfer in a Downstream Positioned Straight Tube, M. M. Ohadi and E. M. Sparrow
Pressure Drop Characteristics for Turbulent Flow in a Straight Circular Tube Situated Downstream of a Bend, M. M. Ohadi, E. M. Sparrow, A. Walavalkar, and A. I. Ansari
On finite deformation plasticity with directional softening Part I: One-component model, M. F. Shi, J. C. Gerdeen, and E. C. Aifantis
An investigation of injection rate controlled heat release of low cetane fuels in a direct injected diesel engine, Bradlee J. Stroia and Duane L. Abata
Equilibrium of a solute in an elastic continuum -A statistical approach, D. J. Unger and E. C. Aifantis
Importance and use of rigid body mode in boundary element method, Madhukar Vable
The influence of sampling conditions on the repeatability of diesel particulate and vapor phase hydrocarbon and PAH measurements, D. A. Waldenmaier, L. D. Grato, S. T. Bagley, J. H. Johnson, and D. G. Leddy
A Preliminary Report on 3D Effects on Caustics, T. W. Webb, E. E. Gdoutos, and Elias C. Aifantis
On tool wear and its effect on machined surface integrity, Qufei Xie, Abdel E. Bayoumi, and L. Alden Kendall
A photoelastic determination of stress-intensity factors under thermal stresses, Peizhong Zhang, Christian P. Burger, and Ibrahim Miskioglu
Works from 1989
The influence of pneumatic atomization on the lean limit and IMEP, Oner Arici, Lawrence W. Evers, and Randy L. Nussio
A Damage Model for Ductile Metals, D. J. Bammann and Elias C. Aifantis
Magnetostatic deformation experiment: Bending of a thin plate, N. S. Christopherson, M. O. Peach, and J. M. Dalrymphle
Biomechanical Analyses of Surgical Correction Techniques in Idiopathic Scoliosis: Significance of Bi-planar Characteristics of Scoliotic Spines, Gopal Jayaraman, Hussein M. Zbib, and Rae R. Jacobs
Hydrogen-Assisted Cracking Studies of 4340 Steel by using the Optical Method of Caustics, D. A. Meyn, T. W. Webb, and E. C. Aifantis
Note on the balance of energy at a phase change interface, Amitabh Narain and D. D. Joseph
Pressure driven flow of pure vapor undergoing laminar film condensation between parallel plates, Amitabh Narain and Y. Kizilyalli
The flow of pure vapor undergoing film condensation between parallel plates, Amitabh Narain and Y. Kizilyalli
Isotropic Analysis of Grid-turbulence, George Treviño
On the Invariant Functions of the Turbulence Bispectrum, George Treviño
Gradient dependent dilatancy and its implications in shear banding and liquefaction, I. Vardoulakis and E. C. Aifantis
Mobile electric power technologies for the army of the future, James J. Zucchetto, John H. Johnson, Phillip S. Myers, and Thomas Jahns
Works from 1988
Diesel engine flame photographs with high pressure injection, Duane L. Abata, Bradlee J. Stroia, N. John Beck, and Alan R. Roach
On three-dimensional nonlinear subharmonic resonant surface waves in a fluid: Part I—Theory, X. M. Gu, P. R. Sentha, and Amitabh Narain
Development of multistage sheet metal forming analysis method, S. A. Majlessi and D. Lee
The Modelling of the Progressive Extensible Plastic Collapse of Thin-wall Shells, A. G. Mamalis, D. E. Manolakos, G. L. Viegelahn, and W. Johnson
On the Role of the Process Zone in Hydrogen Assisted Cracking-I. Threshold Conditions, A. Neimitz and Elais C. Aifantis
On the Role of the Process Zone in Hydrogen Assisted Cracking-II. Kinetic Conditions, A. Neimitz and Elias C. Aifantis
Magnetoelastic buckling: Why theory and experiment disagree, M. O. Peach, N. S. Christopherson, J. M. Dalrymple, and G. L. Viegelahn
Drill wear sensing and failure prediction for untended machining, A. Thangaraj and P. K. Wright
Invariant Structure in Non-Stationary Behavior, G. Treviño
Completeness of solutions in the double porosity theory, D. J. Unger and E. C. Aifantis
Stress Analysis in Plane Orthotropic Material by the Boundary Element Method, Madhukar Vable and David L. Sikarskie
On the concept of relative and plastic spins and its implications to large deformation theories. Part I: Hypoelasticity and vertex-type plasticity, H. M. Zbib and E. C. Aifantis
On the concept of relative and plastic spins and its implications to large deformation theories. Part II: Anisotropic hardening plasticity, H. M. Zbib and E. C. Aifantis
Works from 1987
The physics of plastic deformation, Elais C. Aifantis
The mechanics of phase transformations, Elias Aifantis
A model for finite-deformation plasticity, D. J. Bammann and E. C. Aifantis
Stress Intensity Factors for Interacting Cracks, A. Mehdi-Soozani, Ibrahim Miskioglu, C. P. Burger, and T. J. Rudolphi
Stress Intensity Factors for Near Edge Cracks by Digital Image Analysis, Ibrahim Miskioglu, A. Mehdi-Soozani, C. P. Burger, and A. S. Voloshin
On the Length of Crack Jump during Subcritical Growth, A. Neimitz and Elias C. Aifantis
On the Size and Shape of the Process Zone, A. Neimitz and Elias C. Aifantis
Making the boundary element method less sensitive to changes or errors in the input data, Madhukar Vable
Frequency response estimators for use in the presence of uncorrelated noise, Alfred Wicks and William Shapton
Works from 1986
On the Dynamical Origin of Dislocation Patterns, Elias C. Aifantis
On the Thermodynamic Theory of Fluid Interfaces: Infinite Intervals, Equilibrium solutions, and Minimizers, Vasilios Alexiades and Elias C. Aifantis
On the Theory of Consolidation with Double Porosity-II, Dimitri E. Beskos and Elias C. Aifantis
Aspects of strain measures and strain rates, E. Chu
Environmental Cracking under Mixed-Mode Conditions, E. E. Gdoutos and Elias C. Aifantis
The Method of Caustics in Environmental Cracking, E. E. Gdoutos and Elias C. Aifantis
Extensible Plastic Collapse of Thin-wall Frusta as Energy Absorbers, A. G. Mamalis, D. E. Manolakos, S. Saigal, G. Viegelahn, and W. Johnson
On the Inextensional Axial Collapse of Thin PVC Conical Shells, A. G. Mamalis, D. E. Manolakos, G. L. Viegelahn, N. M. Vaxevanidis, and W. Johnson
Experimental investigation into the axial plastic collapse of steel thin-walled grooved tubes, A. G. Mamalis, G. L. Viegelahn, D. E. Manolakos, and W. Johnson
Impulse dynamics of viscoelastic fluids and some solutions by integral transforms, Amitabh Narain
On K-BKZ and other viscoelastic models as continuum generalizations of the classical spring-dashpot models, Amitabh Narain
Fracture initiation in a lamellar alloy, G. O. Omoike and C. R. Vilmann
Prediction of surface roughness and wavelength with progress of cut in grinding, Sudhakar M. Pandit and G. Sathyaharayanan
Comments on 'a note on the height dependence of the skewness and the kurtosis of the vertical turbulent velocity in the neutral surface layer', George Treviño
A gradient approach to localization of deformation. I. Hyperelastic materials, N. Triantafyllidis and Elias C. Aifantis
A note on machining with a single-coated tungsten-carbide tool of 5° negative rake angle, G. L. Viegelahn, A. G. Mamalis, and A. J. Zavaliangos
Dislocation Patterning in Fatigued Metals: Labyrinth Structures and Rotational Effects, Daniel Walgraef and Elias C. Aifantis
Instabilities during tension of thin voided viscoplastic sheets, Hussein M. Zbib and Elias C. Aifantis
Works from 1985
Computational Modeling of Explosive-filled Cylinders, Charles E. Anderson, William W. Predebon, and Robert R. Karpp
The effects of variable conductivity on unsteady heat transfer in deposits, C. L. Anderson and C. Prakash
Weatherability of pigmented plastics, John M. Dick, Marcus K. Chao, David L. Garrett, and Susan Pogasic
Quantum combustion chamber for the digital engine, Lawrence W. Evers and Oswaldo Baasch
On K-BKZ and other viscoelastic models as continuum generalizations of the classical spring-dashpot models, Amitabh Narain
A model of edge cracking in sheared and bent steel plate, J. F. Siekirk and K. J. Weinmann
Analysis of Non-Stationary Processes by Affine Transformations, G. Treviño
Comments on "on projective invariance of shaky structures in Euclidean space, by B. Wegner", G. Treviño
An algorithm based on the boundary element method for problems in engineering mechanics, Madhukar Vable
On the Formation and Stability of Dislocation Patterns-III: Three-dimensional Considerations, Daniel Walgraef and Elias C. Aifantis