Works from 2001
Design and testing of a four-stroke, EFI snowmobile with catalytic exhaust treatment, Scott A. Miers, Carl L. Anderson, Ryan D. Hayes, John A. Ballmer, and Joseph A. Wegleitner
Laser-induced two-point ignition of premixture with a single-shot laser, M. H. Morsy, Y. S. Ko, S. H. Chung, and P. Cho
Impacts of elevated CO2 and/or O3 on leaf ultrastructure of aspen (Populus tremuloides) and birch (Betula papyrifera) in the Aspen FACE experiment, E. Oksanen, J. Sober, and D. F. Karnosky
Measurement of dynamic parameters of automotive exhaust hangers, Mohan D. Rao, Scott Gruenberg, and Dave Griffiths
Control strategies for a series-parallel hybrid electric vehicle, Dimitrios Rizoulis, Jeffrey Burl, and John Beard
Characteristics of single-grit rotating scratch with a conical tool on pure titanium, Hong Wang, Ghatu Subhash, and Abhijit Chandra
An elastic-plastic-cracking model for finite element analysis of indentation cracking in brittle materials, W. Zhang and G. Subhash
Works from 2000
Dynamic Vickers Indentation of Brittle Materials, Richard J. Anton and Ghatu Subhash
On Displacement Methods in Planar Anisotropic Elasticity, Xin Lin Gao and Robert E. Rowlands
Effect of elongational viscosity on axisymmetric entrance flow of polymers, Mahesh Gupta
Three-dimensional simulation of microchip encapsulation process, Ruihua Han, Linhuo Shi, and Mahesh Gupta
Fundamental studies of diesel particulate filters: Transient loading, regeneration and aging, Athanasios G. Konstandopoulos, Margaritis Kostoglou, Evangelos Skaperdas, Eleni Papaioannou, Dimitrios Zarvalis, and Evdoxia Kladopoulou
COMPUTATIONAL SIMULATION AND FLOW PHYSICS FOR STRATIFIED/ANNULAR CONDENSING FLOWS, Amitabh Narain, G. Yu, and Q. Liu
Instability of Gradient-dependent Elastoviscoplastic Model for Clay and Strain Localization Analysis, F. Oka, A. Yashima, K. Sawada, and Elias C. Aifantis
Using Vibration-assisted Grinding to Reduce Subsurface Damage, W. Qu, K. Wang, M. H. Miller, Y. Huang, and A. Chandra
Analysis of the Grain Depth-of-cut in Plunge Grinding, K. W. Sharp, M. H. Miller, and R. O. Scattergood
Modernization of the Mechanical Engineering Curriculum and Guidelines for Computer-Aided Engineering Instruction, Sheryl Sorby, Graham Walker, Miles Yano, Vladimir Glozman, Kevin Kochersberger, Judy Mathers, John Mckinney, James Schulman, and Michael Young
An experimental and modeling study of cordierite traps - Pressure drop and permeability of clean and particulate loaded traps, Arvind Suresh, Amjad Khan, and John H. Johnson
Experimental investigation of air quality in wet and dry turning, J. W. Sutherland, V. N. Kulur, and N. C. King
Measuring the six dof driving point impedance function and an application to RB inertia property estimation, M. C. Witter, D. L. Brown, and J. R. Blough
Effect of deformation-dependent material parameters on forming limits of thin sheets, Siguang Xu and Klaus Weinmann
Works from 1999
Determination of residual stress fields beneath a Vickers indentation using photoelasticity, R. J. Anton, I. Miskioglu, and G. Subhash
Generalized Predictive Kinetic Energy Controller for vibration suppression in turning, Sohel Anwar and Abhijit Chandra
The vehicle engine cooling system simulation part 1 - Model development, Oner Arici, John H. Johnson, and Ajey J. Kulkarni
Development of an FRF based order tracking technique to separate close and/or crossing orders, Jason Blough and Geoffrey Gwaltney
Post-processing analysis of large channel count order track tests and estimation of linearly independent operating shapes, Jason Blough and Geoffrey Gwaltney
Summary and characteristics of rotating machinery digital signal processing methods, Jason Blough and Geoffrey Gwaltney
A three-dimensional engineering curriculum, Peck Cho
Extraction/filtration of transients embedded in stationary signals using wavelets; Focus on extraction of frequency response functions, Myles Dexter, Harold A. Evensen, Charles Van Karsen, and Jason Blough
Practical aspects of making NAH measurements, S. M. Dumbacher, D. L. Brown, J. R. Blough, and R. W. Bono
Dislocations and disclinations in gradient elasticity, M. Yu Gutkin and E. C. Aifantis
Analysis of intersonic crack growth in unidirectional fiber-reinforced composites, Y. Huang, Wei Wang, C. Liu, and A. J. Rosakis
Characteristics of Residual Plastic Zone under Static and Dynamic Vickers Indentations, B. J. Koeppel and G. Subhash
Influence of cold rolling and strain rate on plastic response of powder metallurgy and chemical vapor deposition rhenium, B. J. Koeppel and G. Subhash
Effect of particle non-sphericity on satellite monitoring of drifting volcanic ash clouds, N. A. Krotkov, D. E. Flittner, A. J. Krueger, A. Kostinski, C. Riley, W. Rose, and O. Torres
Application of indirect force estimation techniques to the automotive transfer case, Chris V. Kurmaniak, Charles Van Karsen, and William R. Kelley
Four-phase sphere modeling of effective bulk modulus of concrete, Guoqiang Li, Yi Zhao, and Su Seng Pang
Effective Young's modulus estimation of concrete, Guoqiang Li, Yi Zhao, Su Seng Pang, and Yongqi Li
Formability in non-symmetric aluminium panel drawing using active drawbeads, Rui Li and Klaus Weinmann
Computational simulation and interfacial shear models for downward annular wavy-interface condensing flow in a vertical pipe, Q. Liu and Amitabh Narain
Reduction of the environmental impact of essential manufacturing processes, Walter W. Olson, Aleksandar Filipovic, John W. Sutherland, and S. M. Pandit
Measurement of dynamic properties of automotive shock absorbers for NVH, Mohan D. Rao, Scott Gruenberg, and Homa Torab
Pressure-swirl atomization in the near field, David P. Schmidt, Idriss Nouar, P. K. Senecal, C. J. Rutland, J. K. Martin, R. D. Reitz, and Jeffrey A. Hoffman
Threshold level as an index of squeak and rattle performance, David E. Soine, Harold A. Evensen, and Charles D. Vankarsen
Vibrational and sound radiation properties of a double layered diesel engine gear cover, David A. Welsh and Harold A. Evensen
Comparison of Hill's yield criteria in forming limit predictions, Siguang Xu and K. J. Weinmann
Computational simulations and flow domain classification for laminar/laminar annular/stratified condensing flows, G. Yu and Amitabh Narain
Works from 1998
A dynamic algorithm for integration in the boundary element method, Bruce A. Ammons and Madhukar Vable
An HR-method of mesh refinement for boundary element method, Bruce A. Ammons and Madhukar Vable
A new multi-point active drawbead forming die: Model development for process optimization, Michael L. Bohn, Stefan U. Jurthe, and Klaus J. Weinmann
Mechanical behavior of a bulk nanostructured iron alloy, J. E. Carsley, A. Fisher, Wav Milligan, and E. C. Alfantis
Fracture analysis of cellular materials: A strain gradient model, J. Y. Chen, Y. Huang, and M. Ortiz
Misfit dislocation patterning in thin films, K. Cholevas, N. Liosatos, A. E. Romanov, M. Zaiser, and E. C. Aifantis
Toward linear complexity optimal control for sparsely interconnected dynamic systems, Brian J. Driessen, Nader Sadegh, and Gordon Parker
Direct Fabrication of Deep X-ray Lithography Masks by Micromechanical Milling, Craig Friedrich, Philip Coane, Jost Goettert, and Niranjan Gopinathin
Automatic threshold selection based on histogram modes and a discriminant criterion, R. Guo and S. M. Pandit
Void-nucleation vs void-growth controlled plastic flow localization in materials with nonuniform particle distributions, Y. Huang, A. Chandra, and N. Y. Li
A study of the vapor-and particle-phase sulfur species in the heavy-duty diesel engine EGR cooler, Admir M. Kreso, John Johnson, Linda D. Gratz, Susan T. Bagley, and David G. Leddy
The Role of Plasticity as a Limiting Factor in the Compressive Failure of High Strength Ceramics, J. Lankford, W. W. Predebon, J. M. Staehler, G. Subhash, Bruce J. Pletka, and C. E. Anderson
Command shaping control of an operator-in-the-loop boom crane, Derek Lewis, Gordon Parker, Brian Driessen, and Rush D. Robinett
Interfacial shear models and their required asymptotic form for annular/stratified film condensation flows in inclined channels and vertical pipes, Amitabh Narain, Guang Yu, and Qingyu Liu
A 2-D computational model describing the flow and filtration characteristics of a ceramic diesel particulate trap, Cornelius N. Opris and John Johnson
A 2-D computational model describing the heat transfer, reaction kinetics and regeneration characteristics of a ceramic diesel particulate trap, Cornelius N. Opris and John H. Johnson
A comparison of time-averaged piston temperatures and surface heat flux between a direct-fuel injected and carbureted two-stroke engine, Mary Chrenka Opris, Robin Renee Jason, and Carl L. Anderson
Dimethyl ether in diesel fuel injection systems, Spencer C. Sorenson, Michael Glensvig, and Duane L. Abata
Effect of elastic mismatch in intersonic crack propagation along a bimaterial interface, W. Wang, Y. Huang, A. J. Rosakis, and C. Liu
Output feedback sliding mode control for a planar flexible manipulator, David G. Wilson, Gordon G. Parker, Gregory P. Starr, and Rush D. Robinett
Vibration control of a slewing smart link, David G. Wilson, Gordon Parker, Gregory P. Starr, Rush D. Robinett, Roy Ikegami, and Ian R. Searle
On predicting the forming limit diagram for automotive aluminium sheet, Siguang Xu and K. J. Weinmann
Prediction of forming limit curves of sheet metals using Hill's 1993 user-friendly yield criterion of anisotropic materials, Siguang Xu and Klaus Weinmann
On the dynamic interaction between moving dislocations, M. Zaiser and Elias C. Aifantis
Works from 1997
Continuity and collocation effects in the boundary element method, Bruce A. Ammons and Madhukar Vable
Crack-size dependence of overall responses of fiber-reinforced composites with matrix cracking, A. Chandra, Y. Huang, and K. X. Hu
An optical sensor for measuring fuel film dynamics of a port-injected engine, Timothy L. Coste and Lawrence W. Evers
Precision of micromilled x-ray masks and exposures, C. Friedrich, P. Coane, J. Goettert, and N. Gopinathin
Analysis of nonlinearly elastic cantilever snap beams for assembly of plastic parts, Mahesh Gupta
Viscoelastic modelling of entrance flow using multimode Leonov model, Mahesh Gupta, C. A. Hieber, and K. K. Wang
A model of evolving damage bands in materials, Y. Huang, X. Y. Gong, Z. Suo, and Z. Q. Jiang
Mixed mode near-tip fields for cracks in materials with strain-gradient effects, Y. Huang, L. Zhang, T. F. Guo, and K. C. Hwang
Target specification error optimal camera configuration for vision-based robotics, Haluk Kucuk, Gordon Parker, Nicholas A. Klymyshyn, and Eric T. Baumgartner
Dynamic modeling of forces on snowplow equipped trucks, Walter W. Olson, Alan Kempainen, Dusan Milacic, and Mark Osborne
Optimal trajectories for flexible-link manipulator slewing using recursive quadratic programming: Experimental verification, G. G. Parker, G. R. Eisle, R. D. Robinett, and J. T. Feddema
Optimal Design of a Flexure Hinge Based XYθ Wafer Stage, Jae W. Ryu, Dae Gab Gweon, and Kee S. Moon
Plastic deformation of hafnium under uniaxial compression, G. Subhash, G. Ravichandran, and B. J. Pletka
A Methodology for the Multi-resolution Simulation of Grinding Wheel Surface, Yiding Wang and Kee S. Moon
Drawbeads in sheet metal stamping - A review, S. G. Xu, M. L. Bohn, and K. J. Weinmann
A new method for determining the refractive index, N. T. Younis and I. Miskioglu
Computational flow simulation and interfacial shear for annular/stratified condensing flows, G. Yu and Amitabh Narain
Strain gradients and continuum modeling of size effect in metal matrix composites, H. T. Zhu, H. M. Zbib, and E. C. Aifantis
Works from 1996
Boundary Element Analysis of Cracks, Bruce A. Ammons and Madhukar Vable
Local extinction Karlovitz number for premixed flames, S. H. Chung, D. H. Chung, C. Fu, and P. Cho
Screw dislocation in gradient elasticity, M. Yu Gutkin and E. C. Alfantis
Elastic Behaviour of Screw Dislocations near Triple Junctions of Interphase Boundaries, M. Yu Gutkin, A. E. Romanov, and Elias Aifantis
The Numerical Calculation of Two-Dimensional Effective Moduli for Microcracked Solids, Y. Huang, A. Chandra, Z. Q. Jiang, X. Wei, and K. X. Hu
Transonic Crack Growth Along a Bimaterial Interface: An Investigation of the Asymptotic Structure of Near-tip Fields, Y. Huang, C. Liu, and A. J. Rosakis
A Brazilian disk for measuring fracture toughness of orthotropic materials, Y. Huang, C. Liu, and M. G. Stout
Swept volumes generated by the natural quadric surfaces, Zeng Jia Hu and Zhi Kui Ling
A Hybrid micro-macro BEM with micro-scale inclusion-crack interactions, Z. Q. Jiang, A. Chandra, and Y. Huang
A priori geometric design of an interference free complex planar mechanism, Zhi Kui Ling and Thomas R. Chase
Wheel Speed Equilibria in Precision Contour Grinding, Michele H. Miller and Thomas A. Dow