Works from 1994
The fracture toughness of a high-strength alumina: compact tension versus indentation fracture techniques, B. R. Murphy, W. W. Predebon, and B. J. Pletka
On anisotropic finite deformation plasticity part I. A two-back stress model, J. Ning and E. C. Aifantis
On anisotropic finite deformation plasticity Part II. A two-component model, J. Ning and E. C. Aifantis
Deterministic and stochastic separation of digital images, Sudhakar M. Pandit, Ghanashyam A. Joshi, and Christopher R. Weber
Vibration and damping of a bonded tubular lap joint, M. D. Rao and H. Zhou
Defect kinetics in crack instabilities, A. E. Romanov and E. C. Alfantis
Nonuniform misfit dislocation distributions in films, A. E. Romanov and E. C. Alfantis
Heat transfer augmentation and pumping power in double-pipe heat exchangers, N. V. Suryanarayana and T. V.V.R. Apparao
Computer-aided torch trajectory generation for automated coating of parts with complex surfaces, T. Vivekanandhan, A. R. Kashani, and R. Echempati
Works from 1993
A Case Study in Creative Problem Solving in Engineering Design, James C. Conwell, George D. Catalano, and John E. Beard
Viscoelastic Analysis of Bonded Tubular Joints Under Torsion, Zhou Haiming and Mohan D. Rao
Vibration and damping analysis of multi-span sandwich beams with arbitrary boundary conditions, S. He and M. D. Rao
Characterization of yield surfaces using balanced biaxial tests of cruciform plate specimens, S. B. Lin, J. L. Ding, H. M. Zbib, and E. C. Alfantis
Film thickness measurement with an ultrasonic transducer, Qing Lu, N. V. Suryanarayana, and Christodoulous Christodoulu
In situ studies of deformation and fracture in nanophase materials, Walter W. Milligan, S. A. Hackney, M. Ke, and E. C. Alfantis
Interfacial shear modeling and flow predictions for internal flows of pure vapor experiencing film condensation, Amitabh Narain
The effects of fuel sulfur concentration on regulated and unregulated heavy-duty diesel emissions, Cornelius N. Opris, Linda D. Gratz, Susan T. Bagley, Kirby J. Baumgard, David G. Leddy, and John H. Johnson
On the kinetic and diffusional nature of linear defects, A. E. Romanov and E. C. Alfantis
A simple approach to solve boundary-value problems in gradient elasticity, C. Q. Ru and E. C. Aifantis
Deformation and fracture in directionally solidified Co-CoAl eutectic, A. V. Shah, W. W. Predebon, and B. J. Pletka
On finite deformation plasticity with directional softening - Part II. Two-component model, M. F. Shi, J. C. Gerdeen, and E. C. Aifantis
Gasification of porous combustion chamber deposits in a spark ignition engine, Bobbi Sue Wood and Carl L. Anderson
A Flexible Simulation Model Generator, Yongbin Yuan, Can A. Dogan, and Gary L. Viegelahn
Works from 1992
On the Role of Gradients in the Localization of Deformation and Fracture, Katerina E. Aifantis
The effects of the generating pin size and placement on the curvature and displacement of epitrochoidal gerotors, J. E. Beard, D. W. Yannitell, and G. R. Pennock
Effects of design parameters on geared two-link mechanisms, John Beard, Malcolm E. Wright, Michael Mailander, and Mark Miller
Mechanical and fatigue properties of stress relieved type 302 stainless steel wire, S. R. Bhonsle and C. D. Van Karsen
Evaluation of lubrication and friction in cold forging using a double backward-extrusion process, Armin Buschhausen, Klaus Weinmann, Joon Y. Lee, and Taylan Altan
Prediction of Loss Factors of Curved Sandwich Beams, S. He and M. D. Rao
Vibration Analysis of Adhesively Bonded Lap Joint, part I: Theory, S. He and M. D. Rao
On the effect of shear when bending crashworthy thin-walled steel tubes, A. G. Mamalis, D. E. Manolakos, G. L. Viegelahn, D. M. Johnson, and A. K. Baldoukas
Interfacial shear modeling and flow predictions for internal film condesation flows, Amitabh Narain
Vibration Analysis of Adhesively Bonded Lap Joint, part II: Numerical Solution, M. D. Rao and S. He
An investigation into the production of Bi- and Tri-layered strip by drawing through wedge-shaped dies, A. K. Taheri and S. A. Majlessi
Three-point Velocity Correlation for Grid-turbulence, George Treviño and Jiajin Qu
A boundary element method for plate bending problems, Madhukar Vable and Zhang Yikang
Numerical simulation of a low‐emission gas turbine combustor using KIVA‐II, S. L. Yang, R. Chen, M. C. Cline, H. L. Nguyen, and G. J. Micklow
On the gradient-dependent theory of plasticity and shear banding, H. M. Zbib and E. C. Aifantis
Works from 1991
On the geometry of slip and spin in finite plastic deformation, N. Aravas and E. C. Alfantis
Effects of a catalyzed diesel particle filter on the chemical and biological character of emissions from a diesel engine used in underground mines, S. T. Bagley, K. J. Baumgard, L. D. Gratz, K. L. Bickel, and W. F. Watts
An infrared telemetry technique for making piston temperature measurements, G. L. Barna, D. B. Brumm, and C. L. Anderson
The theoretical development of vehicle engine cooling airflow models using incompressible flow methods, Xintai Chang, Edward C. Chiang, and John H. Johnson
The dimensionless correlation of airflow for vehicle engine cooling systems, Xintai Chang, Edward C. Chiang, John H. Johnson, and S. L. Yang
Thermoviscoplastic Shear Instability and Higher Order Strain Gradients, Nicolas Charalambakis and Elias C. Aifantis
Bias Errors in Estimating Frequency Response and Coherence Functions from Truncated Transient Signals, Harold A. Evensen and M. W. Trethewey
The effect of a ceramic particulate trap on the particulate and vapor phase emissions of a Heavy-Duty Diesel Engine, L. D. Gratz, S. T. Bagley, K. S. King, K. J. Baumgard, D. G. Leddy, and J. H. Johnson
Energy dissipation and associated failure modes when axially loading polygonal thin-walled cylinders, A. G. Mamalis, D. E. Manolakos, A. K. Baldoukas, and G. L. Viegelahn
On the length of crack advance during hydrogen-assisted cracking, E. I. Meletis and E. C. Alfantis
A photoelastic and FEM analysis of interfacial crack propagation, I. Miskioglu, C. R. Villmann, J. S. Pawloski, and D. M. Pariseau
A Variational Principle for Gradient Plasticity, H. B. Mühlhaus and E. C. Alfantis
Pressure driven flow of pure vapor undergoing laminar film condensation between parallel plates, Amitabh Narain and Y. Kizilyalli
Heat Transfer Enhancement of Laminar and Turbulent Pipe Flow via Corona Discharge, M. M. Ohadi, D. A. Nelson, and S. Zia
Measurement of shear band characteristics in low carbon steel using photoelasticity, G. L. Panger, J. L. Ding, H. M. Zbib, and E. C. Alfantis
Alternative Formulation of Non-Stationary Behavior, G. Treviño
Works from 1990
Laminar flow and heat transfer in a finned tube annulus, Ajay K. Agrawal and Subrata Sengupta
The dimensionality of the modal equations, A. E. Anuta
On stress controlled thermoviscoplastic shearing and higher order strain gradients, N. Charalambakis and E. C. Aifantis
On the problem of shear instability of a finite thermoviscoplastic slab: A gradient approach, Nicolas Ch Charalambakis and Elais C. Aifantis
A one-dimensional transient compressible flow model for cooling airflow rate computation, Edward C. Chiang, George P.C. Huang, Zintai Chang, and John H. Johnson
The thermostat characteristics and its effect on low-flow engine cooling system performance, Edward C. Chiang and John R. Keller
On the microscopic origin of the plastic spin, Y. F. Dafalias and E. C. Aifantis
Possible Role of Deformation‐Induced Point Defects in Dislocation Patterning, Y. Estrin, C. Abromeit, and E. C. Aifantis
Solute distribution in crack tips under mixed mode I/II conditions, E. E. Gdoutos and E. C. Aifantis
A note on the paper "On the Thermodynamic Theory of Fluid Interfaces: Infinite Intervals, Equilibrium Solutions, and Minimizers", K. Kuttler and Elias C. Aifantis
Bending of fibre-reinforced composite thin-walled tubes, A. G. Mamalis, D. E. Manolakos, G. L. Viegelahn, and A. K. Baldoukas
Electrostatic effects on pressure drop in tube flows, D. A. Nelson, M. M. Ohadi, S. Zia, and R. L. Whipple
Effect of a 180° Bend on Heat Transfer in a Downstream Positioned Straight Tube, M. M. Ohadi and E. M. Sparrow
Pressure Drop Characteristics for Turbulent Flow in a Straight Circular Tube Situated Downstream of a Bend, M. M. Ohadi, E. M. Sparrow, A. Walavalkar, and A. I. Ansari
On finite deformation plasticity with directional softening Part I: One-component model, M. F. Shi, J. C. Gerdeen, and E. C. Aifantis
An investigation of injection rate controlled heat release of low cetane fuels in a direct injected diesel engine, Bradlee J. Stroia and Duane L. Abata
Equilibrium of a solute in an elastic continuum -A statistical approach, D. J. Unger and E. C. Aifantis
Importance and use of rigid body mode in boundary element method, Madhukar Vable
The influence of sampling conditions on the repeatability of diesel particulate and vapor phase hydrocarbon and PAH measurements, D. A. Waldenmaier, L. D. Grato, S. T. Bagley, J. H. Johnson, and D. G. Leddy
A Preliminary Report on 3D Effects on Caustics, T. W. Webb, E. E. Gdoutos, and Elias C. Aifantis
On tool wear and its effect on machined surface integrity, Qufei Xie, Abdel E. Bayoumi, and L. Alden Kendall
A photoelastic determination of stress-intensity factors under thermal stresses, Peizhong Zhang, Christian P. Burger, and Ibrahim Miskioglu
Works from 1989
The influence of pneumatic atomization on the lean limit and IMEP, Oner Arici, Lawrence W. Evers, and Randy L. Nussio
A Damage Model for Ductile Metals, D. J. Bammann and Elias C. Aifantis
Magnetostatic deformation experiment: Bending of a thin plate, N. S. Christopherson, M. O. Peach, and J. M. Dalrymphle
Biomechanical Analyses of Surgical Correction Techniques in Idiopathic Scoliosis: Significance of Bi-planar Characteristics of Scoliotic Spines, Gopal Jayaraman, Hussein M. Zbib, and Rae R. Jacobs
Hydrogen-Assisted Cracking Studies of 4340 Steel by using the Optical Method of Caustics, D. A. Meyn, T. W. Webb, and E. C. Aifantis
Note on the balance of energy at a phase change interface, Amitabh Narain and D. D. Joseph
Pressure driven flow of pure vapor undergoing laminar film condensation between parallel plates, Amitabh Narain and Y. Kizilyalli
The flow of pure vapor undergoing film condensation between parallel plates, Amitabh Narain and Y. Kizilyalli
Isotropic Analysis of Grid-turbulence, George Treviño
On the Invariant Functions of the Turbulence Bispectrum, George Treviño
Gradient dependent dilatancy and its implications in shear banding and liquefaction, I. Vardoulakis and E. C. Aifantis
Mobile electric power technologies for the army of the future, James J. Zucchetto, John H. Johnson, Phillip S. Myers, and Thomas Jahns
Works from 1988
Diesel engine flame photographs with high pressure injection, Duane L. Abata, Bradlee J. Stroia, N. John Beck, and Alan R. Roach
On three-dimensional nonlinear subharmonic resonant surface waves in a fluid: Part I—Theory, X. M. Gu, P. R. Sentha, and Amitabh Narain
Development of multistage sheet metal forming analysis method, S. A. Majlessi and D. Lee
The Modelling of the Progressive Extensible Plastic Collapse of Thin-wall Shells, A. G. Mamalis, D. E. Manolakos, G. L. Viegelahn, and W. Johnson
On the Role of the Process Zone in Hydrogen Assisted Cracking-I. Threshold Conditions, A. Neimitz and Elais C. Aifantis
On the Role of the Process Zone in Hydrogen Assisted Cracking-II. Kinetic Conditions, A. Neimitz and Elias C. Aifantis
Magnetoelastic buckling: Why theory and experiment disagree, M. O. Peach, N. S. Christopherson, J. M. Dalrymple, and G. L. Viegelahn
Drill wear sensing and failure prediction for untended machining, A. Thangaraj and P. K. Wright
Invariant Structure in Non-Stationary Behavior, G. Treviño
Completeness of solutions in the double porosity theory, D. J. Unger and E. C. Aifantis
Stress Analysis in Plane Orthotropic Material by the Boundary Element Method, Madhukar Vable and David L. Sikarskie
On the concept of relative and plastic spins and its implications to large deformation theories. Part I: Hypoelasticity and vertex-type plasticity, H. M. Zbib and E. C. Aifantis