Works from 1998
Direct Fabrication of Deep X-ray Lithography Masks by Micromechanical Milling, Craig Friedrich, Philip Coane, Jost Goettert, and Niranjan Gopinathin
Automatic threshold selection based on histogram modes and a discriminant criterion, R. Guo and S. M. Pandit
An experimental study of cutting fluid effects in drilling, D. M. Haan, S. A. Batzer, W. W. Olson, and J. W. Sutherland
Void-nucleation vs void-growth controlled plastic flow localization in materials with nonuniform particle distributions, Y. Huang, A. Chandra, and N. Y. Li
A study of the vapor-and particle-phase sulfur species in the heavy-duty diesel engine EGR cooler, Admir M. Kreso, John Johnson, Linda D. Gratz, Susan T. Bagley, and David G. Leddy
The Role of Plasticity as a Limiting Factor in the Compressive Failure of High Strength Ceramics, J. Lankford, W. W. Predebon, J. M. Staehler, G. Subhash, Bruce J. Pletka, and C. E. Anderson
Command shaping control of an operator-in-the-loop boom crane, Derek Lewis, Gordon Parker, Brian Driessen, and Rush D. Robinett
Interfacial shear models and their required asymptotic form for annular/stratified film condensation flows in inclined channels and vertical pipes, Amitabh Narain, Guang Yu, and Qingyu Liu
A review of recent advances in the application of blank-holder force towards improving the forming limits of sheet metal parts, E. J. Obermeyer and S. A. Majlessi
A 2-D computational model describing the flow and filtration characteristics of a ceramic diesel particulate trap, Cornelius N. Opris and John Johnson
A 2-D computational model describing the heat transfer, reaction kinetics and regeneration characteristics of a ceramic diesel particulate trap, Cornelius N. Opris and John H. Johnson
A comparison of time-averaged piston temperatures and surface heat flux between a direct-fuel injected and carbureted two-stroke engine, Mary Chrenka Opris, Robin Renee Jason, and Carl L. Anderson
Dimethyl ether in diesel fuel injection systems, Spencer C. Sorenson, Michael Glensvig, and Duane L. Abata
Stress across an elastoplastic boundary of a mode I crack: Parabolic to hyperbolic plasticity transition, David J. Unger
Effect of elastic mismatch in intersonic crack propagation along a bimaterial interface, W. Wang, Y. Huang, A. J. Rosakis, and C. Liu
Compensation for the thermal error of a multi-axis machining center, Yiding Wang, Guoxiong Zhang, Kee S. Moon, and John W. Sutherland
Output feedback sliding mode control for a planar flexible manipulator, David G. Wilson, Gordon G. Parker, Gregory P. Starr, and Rush D. Robinett
Vibration control of a slewing smart link, David G. Wilson, Gordon Parker, Gregory P. Starr, Rush D. Robinett, Roy Ikegami, and Ian R. Searle
On predicting the forming limit diagram for automotive aluminium sheet, Siguang Xu and K. J. Weinmann
Prediction of forming limit curves of sheet metals using Hill's 1993 user-friendly yield criterion of anisotropic materials, Siguang Xu and Klaus Weinmann
On the dynamic interaction between moving dislocations, M. Zaiser and Elias C. Aifantis
Stochastic and deterministic aspects of strain localization during cyclic plastic deformation, M. Zaiser, M. Avlonitis, and E. C. Alfantis
Works from 1997
Comparison of helical and skewed axis gerotor pumps, Glynn P. Adams and John Beard
Continuity and collocation effects in the boundary element method, Bruce A. Ammons and Madhukar Vable
Crack-size dependence of overall responses of fiber-reinforced composites with matrix cracking, A. Chandra, Y. Huang, and K. X. Hu
Defect evolution during machining of brittle materials, A. Chandra, K. P. Wang, Y. Huang, and G. Subhash
An optical sensor for measuring fuel film dynamics of a port-injected engine, Timothy L. Coste and Lawrence W. Evers
Precision of micromilled x-ray masks and exposures, C. Friedrich, P. Coane, J. Goettert, and N. Gopinathin
Analysis of nonlinearly elastic cantilever snap beams for assembly of plastic parts, Mahesh Gupta
Viscoelastic modelling of entrance flow using multimode Leonov model, Mahesh Gupta, C. A. Hieber, and K. K. Wang
A model of evolving damage bands in materials, Y. Huang, X. Y. Gong, Z. Suo, and Z. Q. Jiang
Mixed mode near-tip fields for cracks in materials with strain-gradient effects, Y. Huang, L. Zhang, T. F. Guo, and K. C. Hwang
Target specification error optimal camera configuration for vision-based robotics, Haluk Kucuk, Gordon Parker, Nicholas A. Klymyshyn, and Eric T. Baumgartner
Analytical study on the kinematic and dynamic behaviors of a knee joint, Zhi Kui Ling, Hu Qing Guo, and Stacey Boersma
On the asymmetric yield surface of plastically orthotropic materials: A phenomenological study, C. Liu, Y. Huang, and M. G. Stout
Dynamic modeling of forces on snowplow equipped trucks, Walter W. Olson, Alan Kempainen, Dusan Milacic, and Mark Osborne
Optimal trajectories for flexible-link manipulator slewing using recursive quadratic programming: Experimental verification, G. G. Parker, G. R. Eisle, R. D. Robinett, and J. T. Feddema
Force analysis of the apex seals in the Wankel rotary compressor including the influence of fluctuations in the crankshaft speed, Gordon R. Pennock and John Beard
Optimal Design of a Flexure Hinge Based XYθ Wafer Stage, Jae W. Ryu, Dae Gab Gweon, and Kee S. Moon
Plastic deformation of hafnium under uniaxial compression, G. Subhash, G. Ravichandran, and B. J. Pletka
A model for the cutting force system in the gear broaching process, J. W. Sutherland, E. J. Salisbury, and F. W. Hoge
A Methodology for the Multi-resolution Simulation of Grinding Wheel Surface, Yiding Wang and Kee S. Moon
Crack growth resistance curves and stick-slip fracture instabilities, T. W. Webb and E. C. Alfantis
Loading rate dependence of stick-slip fracture in polymers, T. W. Webb and E. C. Alfantis
Drawbeads in sheet metal stamping - A review, S. G. Xu, M. L. Bohn, and K. J. Weinmann
A new method for determining the refractive index, N. T. Younis and I. Miskioglu
Computational flow simulation and interfacial shear for annular/stratified condensing flows, G. Yu and Amitabh Narain
Strain gradients and continuum modeling of size effect in metal matrix composites, H. T. Zhu, H. M. Zbib, and E. C. Aifantis
Works from 1996
Boundary Element Analysis of Cracks, Bruce A. Ammons and Madhukar Vable
Local extinction Karlovitz number for premixed flames, S. H. Chung, D. H. Chung, C. Fu, and P. Cho
Screw dislocation in gradient elasticity, M. Yu Gutkin and E. C. Alfantis
Elastic Behaviour of Screw Dislocations near Triple Junctions of Interphase Boundaries, M. Yu Gutkin, A. E. Romanov, and Elias Aifantis
The Numerical Calculation of Two-Dimensional Effective Moduli for Microcracked Solids, Y. Huang, A. Chandra, Z. Q. Jiang, X. Wei, and K. X. Hu
Transonic Crack Growth Along a Bimaterial Interface: An Investigation of the Asymptotic Structure of Near-tip Fields, Y. Huang, C. Liu, and A. J. Rosakis
A Brazilian disk for measuring fracture toughness of orthotropic materials, Y. Huang, C. Liu, and M. G. Stout
Swept volumes generated by the natural quadric surfaces, Zeng Jia Hu and Zhi Kui Ling
A Hybrid micro-macro BEM with micro-scale inclusion-crack interactions, Z. Q. Jiang, A. Chandra, and Y. Huang
A priori geometric design of an interference free complex planar mechanism, Zhi Kui Ling and Thomas R. Chase
Wheel Speed Equilibria in Precision Contour Grinding, Michele H. Miller and Thomas A. Dow
Modeling of interfacial shear for gas liquid flows in annular film condensation, Amitabh Narain
Gradient Elasticity with Surface Energy: Mode-III Crack Problem, I. Vardoulakis, G. Exadaktylos, and Elias C. Aifantis
Friction Studies in Sheet Metal Forming Based on a Unique Die Shoulder Force Transducer, Klaus Weinmann and Stephen K. Kernosky
Works from 1995
Pattern Formation in Plasticity, Katerina E. Aifantis
Glasslike behavior in a nanostructured Fe/Cu alloy, J. E. Carsley, W. W. Milligan, S. A. Hackney, and E. C. Aifantis
A Simple, Mixtures-Based Model for the Grain Size Dependence of Strength in Nanophase Metals, J. E. Carsley, J. Ning, Walter W. Milligan, Stephen A. Hackney, and Elias C. Aifantis
A hybrid BEM formulation for multiple cracks in orthotropic elastic components, A. Chandra, K. X. Hu, and Y. Huang
Nonuniform Misfit Dislocation Distributions in Nanoscale Thin Layers, M. Yu Gutkin, A. E. Romanov, and Elias C. Aifantis
Observation and Measurement of Grain Rotation and Plastic Strain in Nanostructured Metal Thin Films, M. Ke, Stephen A. Hackney, Walter W. Milligan, and Elias C. Aifantis
Thinking Preferences of Engineering Students: Implications for Curriculum Restructuring, Monika Lumsdaine and Edward Lumsdaine
On the description of anisotropic plastic flow by the scale invariance approach, J. Ning and E. C. Alfantis
Oscillatory Fracture in Polymeric Materials, T. W. Webb and Elias C. Aifantis
On the role of strain gradients in adiabatic shear banding, H. T. Zhu and H. M. Zbib
Works from 1994
A strip-drawing simulator with computer-controlled drawbead penetration and blankholder pressure, J. R. Michler, K. J. Weinmann, A. R. Kashani, and S. A. Majlessi
Effects of pretwist on biomechanical properties of canine patellar tendon, Stephen W. Munns, Gopal Jayaraman, and Scott R. Luallin
The fracture toughness of a high-strength alumina: compact tension versus indentation fracture techniques, B. R. Murphy, W. W. Predebon, and B. J. Pletka
On anisotropic finite deformation plasticity part I. A two-back stress model, J. Ning and E. C. Aifantis
On anisotropic finite deformation plasticity Part II. A two-component model, J. Ning and E. C. Aifantis
Deterministic and stochastic separation of digital images, Sudhakar M. Pandit, Ghanashyam A. Joshi, and Christopher R. Weber
Vibration and damping of a bonded tubular lap joint, M. D. Rao and H. Zhou
Defect kinetics in crack instabilities, A. E. Romanov and E. C. Alfantis
Nonuniform misfit dislocation distributions in films, A. E. Romanov and E. C. Alfantis
Heat transfer augmentation and pumping power in double-pipe heat exchangers, N. V. Suryanarayana and T. V.V.R. Apparao
Computer-aided torch trajectory generation for automated coating of parts with complex surfaces, T. Vivekanandhan, A. R. Kashani, and R. Echempati
Development of a Computer-Controlled Drawbead Simulator for Sheet Metal Forming, K. J. Weinmann, J. R. Michler, V. D. Rao, and A. R. Kashani
Works from 1993
A Case Study in Creative Problem Solving in Engineering Design, James C. Conwell, George D. Catalano, and John E. Beard
Viscoelastic Analysis of Bonded Tubular Joints Under Torsion, Zhou Haiming and Mohan D. Rao
Vibration and damping analysis of multi-span sandwich beams with arbitrary boundary conditions, S. He and M. D. Rao
Characterization of yield surfaces using balanced biaxial tests of cruciform plate specimens, S. B. Lin, J. L. Ding, H. M. Zbib, and E. C. Alfantis
Film thickness measurement with an ultrasonic transducer, Qing Lu, N. V. Suryanarayana, and Christodoulous Christodoulu
In situ studies of deformation and fracture in nanophase materials, Walter W. Milligan, S. A. Hackney, M. Ke, and E. C. Alfantis
Interfacial shear modeling and flow predictions for internal flows of pure vapor experiencing film condensation, Amitabh Narain
The effects of fuel sulfur concentration on regulated and unregulated heavy-duty diesel emissions, Cornelius N. Opris, Linda D. Gratz, Susan T. Bagley, Kirby J. Baumgard, David G. Leddy, and John H. Johnson
On the kinetic and diffusional nature of linear defects, A. E. Romanov and E. C. Alfantis
A simple approach to solve boundary-value problems in gradient elasticity, C. Q. Ru and E. C. Aifantis
Deformation and fracture in directionally solidified Co-CoAl eutectic, A. V. Shah, W. W. Predebon, and B. J. Pletka
On finite deformation plasticity with directional softening - Part II. Two-component model, M. F. Shi, J. C. Gerdeen, and E. C. Aifantis
On the Formability of Aluminum-Coated Steel Sheet, K. J. Weinmann and S. K. Kernosky
Gasification of porous combustion chamber deposits in a spark ignition engine, Bobbi Sue Wood and Carl L. Anderson
A Flexible Simulation Model Generator, Yongbin Yuan, Can A. Dogan, and Gary L. Viegelahn
Works from 1992
On the Role of Gradients in the Localization of Deformation and Fracture, Katerina E. Aifantis