Submissions from 2024
Evolution of Physical, Thermal, and Mechanical Properties of Poly(methyl Methacrylate)-Based Elium Thermoplastic Polymer During Polymerization, Swapnil S. Bamane, Prathamesh Deshpande, Sagar Patil, Marianna Maiaru, and Gregory Odegard
Analysis of Wind Turbine Wake Dynamics by a Gaussian-Core Vortex Lattice Technique, Apurva Baruah and Fernando L. Ponta
Simulation of the Multi-Wake Evolution of Two Sandia National Labs/National Rotor Testbed Turbines Operating in a Tandem Layout, Apurva Baruah, Fernando L. Ponta, and Alayna Farrell
A Novel Solvent-Based Recycling Technology: From Theory to Pilot Plant, Ezra Bar-Ziv, Shreyas Kolapkar, George W. Huber, and Reid C. Van Lehn
Machine learning approaches for identification of heat release shapes in a low temperature combustion engine for control applications, Sadaf Batool, Jeffrey D. Naber, and Mahdi Shahbakhti
Classification and Characterization of Heat Release Rate Traces in Low Temperature Combustion for Optimal Engine Operation, Sadaf Batool, Jeffrey Naber, and Mahdi Shahbakhti
Development of Recycled Alumix431-Based Composites Reinforced with TiB2, TiC, and B4C Fine Ceramic Powders for Aircraft Applications Produced by a Combined Method: Sintering + Forging, Eduardo José Bernardes, Fabio Gatamorta, Isabella Carvalho Lancini, Ibrahim Miskioglu, and Emin Bayraktar
Improving Metal Flow in Lost Foam Casting Through Use of Low Thermal Degradation Hot Melt Adhesives, Kyle Bieniewicz, Matthew J. Reich, Nick Soraruf, Ashlyn Steer, Paul Sanders, and Jacob Belke
Enhanced Pre-Sheath Modeling for Tethered Satellite Systems: A Comprehensive Analysis of TSS-1R Electron Current and Experimental Validation, C. Cai, S. Cai, and D. L. Cooke
Low Shear in Short-Term Impacts Endothelial Cell Traction and Alignment in Long-Term, Mohanish K. Chandurkar, Nikhil Mittal, Shaina P. Royer-Weeden, Steven D. Lehmann, Yeonwoo Rho, and Sangyoon J. Han
Transient Low Shear Stress Preconditioning Influences Long-term Endothelial Traction and Alignment under High Shear Flow, Mohanish Chandurkar, Nikhil Mittal, Shaina P. Royer-Weeden, Steven D. Lehmann, Etienne Michels, Samuel E. Haarman, Scott A. Severance, Yeonwoo Rho, and Sangyoon J. Han
Low Shear in Short-Term Impacts Endothelial Cell Traction and Alignment in Long-Term, Mohanish Chandurkar, Nikhil Mittal, Shaina P. Royer-Weeden, Steven D. Lehmann, Yeonwoo Rho, and Sangyoon J. Han
Integral representations for the double-diffusivity system on the half-line, Andreas Chatziafratis, Elais C. Aifantis, Anthony Carbery, and Athanassios S. Fokas
On Barenblatt's pseudoparabolic equation with forcing on the half-line via the Fokas method, Andreas Chatziafratis, Athanassios S. Fokas, and Elias Aifantis
Atmospheric Science Questions for a Uranian Probe, Emma K. Dahl, Naomi Rowe-Gurney, Glenn S. Orton, Shawn R. Brueshaber, Richard G. Cosentino, Csaba Palotai, Ramanakumar Sankar, and Kunio M. Sayanagi
Band structure reconfiguration and surface Faraday rotation in Bi-substituted iron garnets, Sushree Dash, Gregory Odegard, and Miguel Levy
Parameter-Varying Hydrodynamic Model of a Single Vane in a Variable-Geometry Oscillating Surge Wave Energy Converter, Tania Demonte Gonzalez, Nathan Tom, and Gordon G. Parker
PLC Multi-robot Integration via Ethernet for Human Operated Quality Sampling, Jeevan S. Devagiri, Paniz Khanmohammadi Hazaveh, Nathir Rawashdeh, Sai Revanth Reddy Dudipala, Pratik Mohan Desmuhk, and Aditya Prasad Karmarkar
Deciphering the controlling factors for phase transitions in zeolitic imidazolate frameworks, Tao Du, Shanwu Li, Sudheer Ganisetti, Mathieu Bauchy, Yuanzheng Yue, and Morten M. Smedskjaer
Scaled-Up Continuous Carbon Nanotube Yarn Unidirectional Composite Laminates with Carbon Nanotube Aerogel, Cecil Evers, Claire Jolowsky, Jin Gyu Park, Bailee Ku, Kaylee Thagard, Zhiyong Liang, Britannia Vondrasek, Mike Czabaj, and Gregory Odegard
Analyzing the Effects of Atmospheric Turbulent Fluctuations on the Wake Structure of Wind Turbines and Their Blade Vibrational Dynamics, Alayna Farrell, Fernando Ponta, and Apurva Baruah
On optimization of process parameters of Inconel-718 machining for green production, Anis Fatima, Muhammad Danish Saleem, and Muhammad Wasif
Development of Recycled Aluminium (AA7075 + AA1050)-Based Hybrid Composites Reinforced with Recycled Rice Husk Produced by Sintering + Forging, Fabio Gatamorta, Noé Cheung, Dhurata Katundi, Ibrahim Miskioglu, and Emin Bayraktar
Design of Recycled “A356-A7075” Matrix Composites Reinforced with “Nb2Al-Zr” Produced by Sinter Forging, Fabio Gatamorta, Dhurata Katundi, Olga Klinkova, Emin Bayraktar, and Ibrahim Miskioglu
Development of Ni-Al-Based Composites Reinforced with Recycled AA7075 + AA1050 and Ceramics Produced by the Sintering + Forging Process, Fabio Gatamorta, Olga Klinkova, Özgür Aslan, Ibrahim Miskioglu, and Emin Bayraktar
Propulsion Electrification Architecture Selection Process and Cost of Carbon Abatement Analysis for Heavy-Duty Off-Road Material Handler, Bryant Goodenough, Alexander Czarnecki, Darrell Robinette, Jeremy Worm, Brian Burroughs, Phil Latendresse, and John Westman
Methods and metrics to assess the accuracy of heat flux data from a spark ignition IC engine, Siddharth Gopujkar, Richard Davis, Jeremy Worm, William Hansley, and Joel Duncan
Assessing the Benefits of Electrification for the Mackinac Island Ferry from an Environmental and Economic Perspective, Siddharth Gopujkar and Jeremy Worm
Development and Validation of Dynamic Programming based Eco Approach and Departure Algorithm, Vasu Goyal, Ahammad Basha Dudekula, and Jeffrey Naber
Warranty Repairs Reimagined through Machine Learning and Statistical Pattern Recognition (Part 1), Jody Hand, Sawyer Hall, Michael Carr, and Jeremy Worm
IMPROVING THE EFFICIENCY OF WAAM-BASED HYBRID MANUFACTURING THROUGH SELECTIVE IN-SITU MACHINING BASED ON HEIGHT ERROR PREDICTION, Nicholas V. Hendrickson, Saleh Valizadeh Sotubadi, and Vinh Nguyen
Radiation Force Modeling for a Wave Energy Converter Array, Salman Husain, Gordon Parker, David Forehand, and Enrico Anderlini
Enhanced insights into paired droplet evaporation dynamics on heated substrates: Unveiling the role of convection and diffusion, Won Yeong Hwang, Hyung Ju Lee, Jinghao Jin, Chang Kyoung Choi, and Seong Hyuk Lee
Advanced Four Pillars of Manufacturing Knowledge, John Irwin, Suzy Gorospes Marzano, Ismail Fidan, and Neil Littell
Energy Savings Impact of Eco-Driving Control Based on Powertrain Characteristics in Connected and Automated Vehicles: On-Track Demonstrations, Jongryeol Jeong, Elangovan Kandaswamy, Ahammad Basha Dudekula, Jihun Han, Dominik Karbowski, and Jeffrey Naber
Fibro-porous materials: 3D-printed hybrid porous materials for multifunctional applications, William Johnston, Janith Godakawela, Carlos Gatti, Suresh Keshavanarayana, and Bhisham Sharma
Torque Converter Dynamic Characterization Using Torque Transmissibility Frequency Response Functions: Locked Clutch Operation, Luke Jurmu, Darrell Robinette, Jason Blough, and Craig Reynolds
Optimal Molecular Dynamics System Size for Increased Precision and Efficiency for Epoxy Materials, Khatereh Kashmari, Sagar Patil, Josh Kemppainen, Shankara Gowtham, and Gregory Odegard
Carbon nanotube as a conductive rheological modifier for carbon fiber-reinforced epoxy 3D printing inks, Masoud Kasraie, Aaron Krieg, Andrew C. Abbott, Akash Gawde, Timothy Eisele, Julia A. King, Gregory Odegard, Jeffery W. Baur, and Parisa Pour Shahid Saeed Abadi
LUNAR: Automated Input Generation and Analysis for Reactive LAMMPS Simulations, Josh Kemppainen, Jacob R. Gissinger, S. Gowtham, and Gregory Odegard
Improvements Are Needed by the Customer and Launch Vehicle Provider on Spacecraft Shock Loads, Required Analysis, and Required Testing, Monty Kennedy and Jason Blough
Spacecraft Impact and Shock Testing Is Needed to Reduce the Significant Uncertainty in Shock Analysis and Shock Subsystem Testing, Monty Kennedy and Jason Blough
Automating an Industrial Dishwashing System Using Hardware-in-the-Loop PLC Simulation with Factory I/O, Paniz Khanmohammadi Hazaveh, Nathir Rawashdeh, Dunsten M. X. Dsouza, Joshua Olusola, Joshua Albrecht, and Eric Houck
Measurement of Hydrogen Jet Equivalence Ratio using Laser Induced Breakdown Spectroscopy, Youngmin Ki, Jungho Justin Kim, Seong Young Lee, Joonsik Hwang, and Choongsik Bae
Mixing measurement on hydrogen jet by LIBS under various injection strategies, Youngmin Ki, Jungho Justin Kim, Seong Young Lee, Joonsik Hwang, and Choongsik Bae
Increasing the Dissolution Rate of Polystyrene Waste in Solvent-Based Recycling, Rita Kol, Ruben Denolf, Gwendoline Bernaert, Dave Manhaeghe, Ezra Bar Ziv, George W. Huber, Norbert Niessner, Michiel Verswyvel, Angeliki Lemonidou, Dimitris S. Achilias, and Steven De Meester
Gradient nanomechanics in civil engineering, A. Konstantinidis and Elias C. Aifantis
A 3D multi-phase-field model for orientation-dependent complex crack interaction in fiber-reinforced composite laminates, Akash Kumar and Trisha Sain
Modeling the interaction between intra and interlaminar cracking in FRP composites using phase-field regularized interface fracture, Akash Kumar and Trisha Sain
Phase field-based cohesive zone approach to model delamination in fiber-reinforced polymer composites, Akash Kumar and Trisha Sain
Color and multi-band imaging of a cavity-based flameholder in supersonic flow, Seong Young Lee and Timothy M. Ombrello
Efficient data-driven nonlinear system identification for structural health monitoring: A proof-of-principle study, Shanwu Li, Xiaowei Jin, Shujin Laima, and Hui Li
Data-driven modeling of bifurcation systems by learning the bifurcation parameter generalization, Shanwu Li and Yongchao Yang
Physics-Guided Data-Driven Failure Identification of Underwater Mooring Systems in Offshore Infrastructures, Yixuan Liu, Shangyan Zou, Qingbin Gao, and Kai Zhou
VISION: Vehicle Infrared Signature Aware Off-Road Navigation, Yashodeep Lonari, Jeffrey Naber, Vamshi Korivi, Nathan Tison, Peter Rynes, and Ruan Yeefeng
Robust plastic waste classification using wavelet transform multi-resolution analysis and convolutional neural networks, Fei Long, Shengli Jiang, Ezra Bar Ziv, and Victor M. Zavala
Evaluating Vibration Controller Performance in Virtual and Hardware Tests, Tessa Lytle, Wyatt Saeger, Aiden Tombuelt, Shannon Danforth, James DeClerck, Brittany Ouellette, and John Schultze
Tradeoff in interfacial shear strength and elastic properties in functionalized graphene oxide nanocomposites, Hashim Al Mahmud, Sagar Patil, and Gregory Odegard
Myosin-independent stiffness sensing by fibroblasts is regulated by the viscoelasticity of flowing actin, Nikhil Mittal, Etienne B. Michels, Andrew E. Massey, Yunxiu Qiu, Shaina P. Royer-Weeden, Bryan R. Smith, Alexander X. Cartagena-Rivera, and Sangyoon J. Han
Polymerizing actin regulates myosin-independent mechanosensing by modulating actin elasticity and flow fluctuation, Nikhil Mittal, Etienne Michels, Kathleen Pakenas, Shaina P. Royer-Weeden, and Sangyoon J. Han
Development of Autonomous Vehicle Motion Planning and Control Algorithms with D* Planner and Model Predictive Control, Somnath Mondal and Bo Chen
MultiSector Dynamics: 2023 Inaugural Workshop Report, Erwan Monier, Patrick M. Reed, Chris Vernon, Antonia Hadjimichael, Christa Brelsford, Casey D. Burleyson, Ana Dyreson, and et al.
Experimental investigation of long-term performance of fiber-reinforced epoxy and polyurethane polymer composites, Abdel Hamid I. Mourad, Amir Hussain Idrisi, Asima Zahoor, Muhammad M. Sherif, and Beckry M. Abdel-Magid
Automatic Text Analysis of Reflective Essays to Quantify the Impact of the Modification of a Mechanical Engineering Course, Aneet D. Narendranath and Jeffrey Allen
Augmented Reality Interface for Robot-Sensor Coordinate Registration, Vinh Nguyen, Xiaofeng Liu, and Jeremy Marvel
Gamma-ray irradiation to achieve high tensile performance of unidirectional CNT yarn laminates, Jin Gyu Park, Cecil Evers, Claire Jolowsky, Britannia Vondrasek, Kaylee Thagard, Michael Czabaj, Bailee Ku, Yuezhou Wang, Traian Dumitrică, Gregory Odegard, and Zhiyong Liang
The effect of gamma-ray irradiation on polymer-graphene nanocomposite interfaces, Sagar Patil, Josh Kemppainen, Travis Wavrunek, and Gregory Odegard
Influences of backpack loading on recovery from anterior and posterior losses of balance: An exploratory investigation, Jessica Pitts, Vicki Komisar, Kayley Elmblad, Alyssa Smith, Derek Verbrigghe, Carly Siko, Maury A. Nussbaum, and Carolyn A Duncan
Characterization of Oscillatory Response of Light-Weight Wind Turbine Rotors under Controlled Gust Pulses, Fernando Ponta, Alayna Farrell, Apurva Baruah, and North Yates
Numerical Study of a Six-Stroke Gasoline Compression Ignition (6S-GCI) Engine Combustion with Oxygenated Fuels, Ashwin Karthik Purushothaman, Youngchul Ra, Kyoung Pyo Ha, Shengrong Zhu, and Ankith Ullal
Route-Optimized Energy Usage for a Plug-in Hybrid Electric Vehicle Using Mode Blending, Andrew Robare, Aman Poovalappil, Mojtaba Bahramgiri, Darrell Robinette, Jeffrey Naber, and Bo Chen
Dynamic Characterization of a Twin Plate Torque Converter Clutch during Controlled Slip, Darrell Robinette, Jason Blough, Luke Jurmu, Craig Reynolds, and Andrew Scheich
A Micromechanical Study of Interactions of Cyanate Ester Monomer with Graphene or Boron Nitride Monolayer, Geeta Sachdeva, Álvaro Lobato, Ravindra Pandey, and Gregory Odegard
Jovian Vortex Hunter: A Citizen Science Project to Study Jupiter’s Vortices, Ramanakumar Sankar, Shawn R. Brueshaber, Lucy Fortson, Candice Hansen-Koharcheck, Chris Lintott, Kameswara Mantha, Cooper Nesmith, and Glenn S. Orton
Facilitating Project-Based Learning Through Application of Established Pedagogical Methods in the SAE AutoDrive Challenge Student Design Competition, Mark H. Schmelzle, Logan Schexnaydre, Nathan Spike, Darrell Robinette, and Jeremy Bos
Experiential Learning for the Mechatronics Workforce in Upper Peninsula of Michigan, Aleksandr Sergeyev, David M. Labyak, Vinh Nguyen, Paniz Khanmohammadi Hazaveh, Linda Wanless, Mark Bradley Kinney, and et. al.
Correction: Finite Element Analysis and Machine Learning Guided Design of Carbon Fiber Organosheet-Based Battery Enclosures for Crashworthiness (Applied Composite Materials, (2024), 10.1007/s10443-024-10218-z), Shadab Anwar Shaikh, M. F.N. Taufique, Kranthi Balusu, Shank S. Kulkarni, Forrest Hale, Jonathan Oleson, Ram Devanathan, and Ayoub Soulami
Finite Element Analysis and Machine Learning Guided Design of Carbon Fiber Organosheet-Based Battery Enclosures for Crashworthiness, Shadab Anwar Shaikh, M. F.N. Taufique, Kranthi Balusu, Shank S. Kulkarni, Forrest Hale, Jonathan Oleson, Ram Devanathan, and Ayoub Soulami
MODELLING THERMOPHORESIS IN NANOFLUIDS, Udit Sharma and Jeffrey Allen
INTEGRATED DATA PROCESSING AND MODEL SELECTION IN MACHINE LEARNING FRAMEWORK DEVELOPMENT TO PREDICT DIMENSIONAL ERRORS IN WIRE ARC ADDITIVE MANUFACTURING (WAAM), Saleh Valizadeh Sotubadi, Nicholas V. Hendrickson, and Vinh Nguyen
Knowledge-informed deep networks for robust fault diagnosis of rolling bearings, Yunsheng Su, Luojie Shi, Kai Zhou, Guangxing Bai, and Zequn Wang
Multi-body hydrodynamic interactions in fish-like swimming, Mitchel L. Timm, Rohit S. Pandhare, and Hassan Masoud
A multiphase heat transfer model for spreading wall film coupled with solid wall temperature field, Ankith Ullal, Youngchul Ra, Seong Young Lee, and Shiyou Yang
Development of a Low-Friction Testbed for Model Scale Wave Energy Converter Control System Studies, Mady Van Wieren, Tania Demonte Gonzalez, Houssein Yassin, Niccolo Jeanetta-Wark, Theo Kumpula, John Naglak, and Gordon Parker
Characterization of multidirectional carbon-nanotube-yarn/bismaleimide laminates under tensile loading, Britannia Vondrasek, Cecil Evers, Claire Jolowsky, Gregory Odegard, Zhiyong Liang, and Michael Czabaj
Design of a high-performance surface plasmon resonance device for effective measurement of thin liquid film thickness, Hongjian Wang, Hyung Ju Lee, Jinghao Jin, Alemayehu Nana Koya, Chang Kyoung Choi, Longnan Li, Wei Li, and Seong Hyuk Lee
Hamiltonian Surface Shaping Power Flow Modeling and Control Design of DC Microgrids, Wayne Weaver, Rush Robinett, and David G. Wilson
Feasibility Study of a Nonlinear Wave Energy Converter With Variable Buoy Geometry, David G. Wilson, Rush Robinett, Wayne Weaver, and Steve F. Glover
Implementing reactivity in molecular dynamics simulations with harmonic force fields, Jordan J. Winetrout, Krishan Kanhaiya, Josh Kemppainen, Pieter J. in ‘t Veld, Geeta Sachdeva, Ravindra Pandey, Behzad Damirchi, Adri van Duin, Gregory Odegard, and Hendrik Heinz
Designing hybrid aerogel-3D printed absorbers for simultaneous low frequency and broadband noise control, Yutong Xue, L. Paige Nobles, Bhisham Sharma, and J. Stuart Bolton
Sustainable Multifunctionality: Bio-Inspired Printing of Nanocellulose Aerogel Acoustical Materials, Guang Yang, Amulya Lomte, Bhisham Sharma, Shuting Lei, and Dong Lin
Static and Fatigue Behaviour of Recycled Thin Sheet “Ti-Al-Nb” Based Composites Produced by Hot Forging Diffusion Process, Georges Zambelis, Fabio Gatamorta, Özgür Aslan, Ibrahim Miskioglu, and Emin Bayraktar
Experimental Study and Analysis of Ultra-Low Temperature Fuel Spray With a Heavy-Duty Injector Under Vaporizing Conditions, Zhihao Zhao, Anqi Zhang, Henry Schmidt, William Atkinson, and Jeffrey Naber
Wave energy converter arrays: A methodology to assess performance considering the disturbed wave field, Shangyan Zou, Bryson Robertson, Aeron Roach, Tim Mundon, Brian Rosenberg, and Markel Penalba
Works from 2023
A high-performance lung-inspired ceramic 3D-printed heat exchanger for high-temperature energy-efficient systems, Behzad Ahmadi, Joseph Cesarano, Kashif Nawaz, Nikolas Ninos, and Sajjad Bigham
Pattern Competition for the Sequential Bifurcations Approach (SBA) to Turbulence in the Co-Rotating Taylor–Couette System: Quinary States, T. Akinaga, S. C. Generalis, and E. C. Alfantis
Pattern Competition in the Sequential Bifurcation Approach to Turbulence in Homogeneously Heated Inclined Fluid and Solid Layers, T. Akinaga, S. C. Generalis, and E. C. Alfantis
Utilization of Mechanically Recycled Carbon Fibers in Vinyl Ester Composites, Khaled AlHarmoodi, Amir Hussain Idrisi, Abdel Hamid Ismail Mourad, and Basim Abu-Jdayil
Probing the Influence of Surface Chemical Functionalization on Graphene Nanoplatelets-Epoxy Interfacial Shear Strength Using Molecular Dynamics, Hashim Al Mahmud, Sagar Patil, Matthew Radue, and Gregory Odegard
Probing the Influence of Surface Chemical Functionalization on Graphene Nanoplatelets-Epoxy Interfacial Shear Strength Using Molecular Dynamics, Hashim Al Muhmud, Sagar U. Patil, Matthew S. Radue, and Gregory M. Odegard