Works from 2005
Cavitation prediction in automotive torque converters, Darin Kowalski, Carl Anderson, and Jason Blough
On dislocations in a special class of generalized elasticity, Markus Lazar, Gérard A. Maugin, and Elias C. Aifantis
Micromechanical modeling of three-dimensional open-cell foams using the matrix method for spatial frames, K. Li, X. L. Gao, and A. K. Roy
Effects of Cell Shape and Cell Wall Thickness Variations on the Elastic Properties of Two-dimensional Cellular Solids, K. Li, X. L. Gao, and G. Subhash
Windowed Selected Moving Autocorrelation (WSMA), Tri-Correlation (TriC), and misfire detection, Louis Yizhang Liu, Hanlong Yang, Steven Plee, and Jeffrey D. Naber
A parametric study on crushability of open-cell structural polymeric foams, Qunli Liu, Ghatu Subhash, and Xin Lin Gao
Development of the enhanced vehicle and engine cooling system simulation and application to active cooling control, Brian J. Luptowski, Oner Arici, John Johnson, and Gordon Parker
Impingement identification in a high speed diesel engine using piston surface temperature measurements, Scott Miers, Carl L. Anderson, Jason Blough, and M. Koray Inal
Educational solutions, James R. Mihelcic and David R. Hokanson
Internal condensing flows inside a vertical pipe: Experimental/computational investigations of effects of constrained and natural exit conditions, Amitabh Narain, A. Siemionko, Jorge H. Kurita, T. W. Ng, N. Kim, K. Opella, and P. O. Sweger
Determining localized garment insulation values from manikin studies: Computational method and results, D. A. Nelson, J. S. Curlee, A. R. Curran, J. M. Ziriax, and P. A. Mason
Validation of the state-space model of fatigue crack growth in ductile alloys under variable-amplitude load via comparison of the crack-opening stress data, Ravindra Patankar and Rong Qu
The classical Nusselt problem of film condensation: direct steady and unsteady computational simulations that yield results on stability and wave effects, L. Phan, S. L. Post, and Amitabh Narain
Direct computational simulations for condensation inside tubes and channels, L. Phan, X. Wang, Shantanu Kulkarni, and Amitabh Narain
Vehicle engine aftertreatment system simulation (veass) model: Application to a controls design strategy for active regeneration of a catalyzed particulate filter, Nishant Singh, John H. Johnson, Gordon Parker, and Dr. Jason Yang
Scratch resistance and residual stresses in longitudinally and transversely ground silicon nitride, G. Subhash, M. A. Marszalek, A. A. Wereszczak, and M. J. Lance
Nanoindentation of injection molded PLA and self-reinforced composite PLA after in vitro conditioning for three months, Debra D. Wright-Charlesworth, Darinda M. Miller, Ibrahim Miskioglu, and Julia A. King
Nanomechanical properties of self-reinforced composite poly(methyl methacrylate) as a function of processing temperature, Debra D. Wright-Charlesworth, William J. Peers, Ibrahim Miskioglu, and Laura L. Loo
The effect of processing conditions on the properties of poly(methyl methacrylate) fibers, Debra D. Wright, Eugene P. Lautenschlager, and Jeremy L. Gilbert
A KIVA code with Reynolds-stress model for engine flow simulation, S. L. Yang, Y. K. Siow, C. Y. Teo, and K. Hanjalic
Investigation of shear band evolution in amorphous alloys beneath a Vickers indentation, Hongwen Zhang, Xiaoning Jing, Ghatu Subhash, Laszlo J. Kecskes, and Robert J. Dowding
Works from 2004
Active positioning device for a perimodiolar cochlear electrode array, B. Y. Arcand, P. T. Bhatti, N. V. Butala, J. Wang, C. R. Friedrich, and K. D. Wise
Topology optimization of smart structures using a homogenization approach, Markus J. Buehler and Bernhard Bettig
Optimal Sensor Design and Control of Piezoelectric Laminate Beams, Wei Chen, Markus Buehler, Gordon Parker, and Bernhard Bettig
Active structural acoustic control of road noise in apassenger vehicle, Amanjot S. Dhaliwal, Gordon Parker, and J. R. Blough
Annexin V disruption impairs mechanically induced calcium signaling in osteoblastic cells, T. L. Haut Donahue, D. C. Genetos, C. R. Jacobs, H. J. Donahue, and C. E. Yellowley
Effect of workpiece springback on micromilling forces, C. R. Friedrich and V. P. Kulkarni
An experimental investigation of cutting fluid mist removal via a novel atomizer system, S. S. Kinare, C. Ju, D. J. Michalek, and J. W. Sutherland
Preliminary sputter-erosion characterization of multiwalled carbon nanotubes, Lyon Bradley King, Yoke Khin Yap, Jitendra Menda, Lakshman Kumar Vanga, Vijaya Kayastha, Jiesheng Wang, and et. al.
Synergistic effects of carbon fillers on tensile and impact properties in nylon 6,6 and polycarbonate based resins, Jeremiah P. Konell, Julia A. King, and Ibrahim Miskioglu
Robot positioning of flexible-link manipulator using vision, Halûk Küçük, Gordon Parker, and Eric T. Baumgartner
Desensitization of camera-aided manipulation to target specification errors, Haluk Küçük, Gordon Parker, Eric T. Baumgartner, and Nicholas A. Klymyshyn
Effects of gravity, shear and surface tension in internal condensing flows: Results from direct computational simulations, Q. Liang, X. Wang, and Amitabh Narain
Solution to Line Loading of a Semi-infinite Solid in Gradient Elasticity, S. Li, Ibrahim Miskioglu, and B. S. Altan
A phenomenological constitutive model for foams under large deformations, Qunli Liu and Ghatu Subhash
The Effect of Axial Load in the Tibia on the Response of the 90°Flexed Knee to Blunt Impacts with a Deformable Interface, Eric G. Meyer, Michael T. Sinnott, Roger C. Haut, Gopal Jayaraman, and Walter E. Smith
Direct computational simulations for internal condensing flows and results on attainability/stability of steady solutions, their intrinsic waviness, and their noise sensitivity, Amitabh Narain, Q. Liang, G. Yu, and X. Wang
Constitutive modeling of piezoelectric polymer composites, G. M. Odegard
Nonlinear Adaptive Control for Slewing Flexible Active Structures, D. G. Wilson, G. P. Starr, G. Parker, and R. D. Robinett
Vertically aligned carbon nanotubes as the sputter resist in space propulsive systems, Yoke Khin Yap, Vijaya Kayastha, Jitendra Menda, Lakshman Kumar Vanga, Jiesheng Wang, Alexander W. Kieckhafer, Dean Richard Massey, and Lyon Bradley King
Adaptive estimation for brushless DC motor actuators in electric power assisted steering, Liangtao Zhu and Ravindra Patankar
Works from 2003
Generating swing-suppressed maneuvers for crane systems with rate saturation, Michael J. Agostini, Gordon Parker, Hanspeter Schaub, Kenneth Groom, and Rush D. Robinett
Experimental investigation of cavitation signatures in an automotive torque converter using a microwave telemetry technique, Carl L. Anderson, L. Zeng, P. O. Sweger, Amitabh Narain, and Jason R. Blough
Adaptation of four-stroke motorcycle engine to continuously variable transmission for snowmobile application, Brian D. Barr, David J. McKinstry, Aaron S. Messenger, Jason M. Seidenstucker, Daniel H. Kallio, Daniel P. Hoffman, and Bernhard P. Bettig
Design and development of the 2002 michigan tech FutureTruck, a parallel hybrid electric vehicle, Brian Bartley, Nick Manor, Christian Muehlfeld, Brian Rutkowski, Jason Trombley, John Curlee, Joel Pero, Brad Lobbestael, Jason Kiiskila, Justin McGinn, and John E. Beard
A comparison between power injection and impulse response decay methods for estimating frequency averaged loss factors for SEA, Brandon Bloss and Mohan D. Rao
Development and analysis of time variant discrete Fourier transform order tracking, J. R. Blough
A finite element and experimental study of sheet deformation as influenced by drawbead end geometry, Chin Chun Chen and Klaus J. Weinmann
Robust Design and Control of Piezoelectric Laminate Beams using a Simultaneous Optimization Method, Wei Chen, Markus Buehler, Gordon Parker, and Bernhard Bettig
Low speed running characteristics of a small two-stroke engine with auxiliary exhaust ports, Samuel W. Coates, Lawrence W. Evers, Charles F. Zellner, Matthew A. Pruski, and John P. Bogema
Finite Deformation Continuum Model for Single-walled Carbon Nanotubes, X. L. Gao and K. Li
The use of unique time history input excitation in the dynamic characterization of automotive mounts, John Holt, Mohan D. Rao, Jason Blough, and Scott Gruenberg
On-site DME generation from methanol for pilot injection in CI engines, David L. Horstman, Duane L. Abata, and Jason M. Keith
A one-dimensional computational model for studying the filtration and regeneration characteristics of a catalyzed wall-flow diesel particulate filter, Cuong T. Huynh, John H. Johnson, Song L. Yang, Susan T. Bagley, and James R. Warner
Study of interspacecraft Coulomb forces and implications for formation flying, Lyon Brad King, Gordon Parker, Satwik Deshmukh, and Jer Hong Chong
A study describing the performance of diesel particulate filters during loading and regeneration - A lumped parameter model for control applications, Evdoxia A. Kladopoulou, Song-Lin Yang, John Johnson, Gordon Parker, and Athanasios G. Konstandopoulos
Tensile modulus modeling of carbon-filled nylon 6,6 and polycarbonate-based resins, Jeremiah P. Konell, Julia A. King, and Ibrahim Miskioglu
Effects of gravity and surface tension and interfacial-waves and heat-transfer rates in internal condensing flows, Q. Liang, X. Wang, A. S. Barve, and Amitabh Narain
Powersplit hybrid electric vehicle control with electronic throttle control (ETC), Richard Nesbitt, Christian Muehlfeld, and Sudhakar Pandit
An experimental and numerical study of the performance characteristics of the diesel oxidation catalyst in a continuously regenerating particulate filter, Antonio P. Triana, John H. Johnson, Song L. Yang, and Kirby J. Baumgard
Effects of a catalyzed particulate filter on emissions from a diesel engine: Chemical characterization data and particulate emissions measured with thermal optical and gravimetric methods, James R. Warner, John H. Johnson, Susan T. Bagley, and Cuong T. Huynh
Works from 2002
Command shaping nonlinear inputs using basis functions, Michael J. Agostini and Gordon Parker
Command shaping and closed-loop control interactions for a ship crane, Michael J. Agostini, Gordon Parker, Kenneth Groom, Hanspeter Schaub, and Rush D. Robinett
Topology optimization of smart structures using a homogenization approach, Markus Buehler, Bernhard Bettig, and Gordon G. Parker
A controlled EGR cooling system for heavy duty diesel applications using the vehicle engine cooling system simulation, Robert D. Chalgren, Gordon Parker, Oner Arici, and John Johnson
Micromechanical machining of high aspect ratio prototypes, C. R. Friedrich
Design and development of the 2001 Michigan Tech futuretruck, a power-split hybrid electric vehicle, Karl Haapala, Aaron Thul, Steve Andrasko, Christian Muehlfield, Brandon Bloss, Richard Nesbitt, and John Beard
Oxidation catalytic converter and emulsified fuel effects on heavy-duty diesel engine emissions, Girish Janakiraman, John H. Johnson, Susan T. Bagley, James R. Warner, Cuong T. Huynh, Amjad Khan, and David G. Leddy
Modeling of human response from vehicle performance characteristics using artificial neural networks, Kee S. Moon, Mark D. Osborne, Dustin J. Kuykendall, and William H. Poirier
Fatigue-crack-propagation thresholds in a nickel-base superalloy at high frequencies and temperatures, A. Shyam, S. A. Padula, S. I. Marras, and W. W. Milligan
Oxidation catalytic converter and emulsified fuel effects on heavy-duty diesel engine particulate matter emissions, James R. Warner, Cuong Huynh, Girish Janakiraman, John H. Johnson, and Susan T. Bagley
Design and testing of a single cylinder, turbocharged, four-stroke snowmobile with E.F.I. and catalytic exhaust treatment, Joseph A. Wegleitner, Scott Miers, Ryan D. Hayes, Scott P. Heim, Dan P. Hoffman, and Bernhard P. Bettig
Augmented sliding mode control for flexible link manipulators, David G. Wilson, Rush D. Robinett, Gordon Parker, and Gregory P. Starr
Modeling and numerical simulation of diesel particulate trap performance during loading and regeneration, Z. Zhang, S. L. Yang, and J. Johnson
Works from 2001
Multiple axis boom crane maneuver generation for payload swing suppression, Michael J. Agostini, Gordon Parker, Erin E. Kruse, Hanspeter Schaub, Kenneth Groom, and Rush D. Robinett
Material damping properties: A comparison of laboratory test methods and the relationship to in-vehicle performance, Matthew D. Black and Mohan D. Rao
Two displacement methods for in-plane deformations of orthotropic linear elastic materials, Xin Lin Gao
The effects of natural aging on fleet and durability vehicle engine mounts from a dynamic characterization perspective, Scott Gruenberg, Jason Blough, Darin Kowalski, and Jay Pistana
The effects of different input excitation on the dynamic characterization of an automotive shock absorber, Darin Kowalski, Mohan D. Rao, Jason Blough, Scott Gruenberg, and Dave Griffiths
Design and development of a model based feedback controlled cooling system for heavy duty diesel truck applications using a vehicle engine cooling system simulation, Chad Lehner, Gordon Parker, Oner Arici, and John Johnson
Design and testing of a four-stroke, EFI snowmobile with catalytic exhaust treatment, Scott A. Miers, Carl L. Anderson, Ryan D. Hayes, John A. Ballmer, and Joseph A. Wegleitner
Impacts of elevated CO2 and/or O3 on leaf ultrastructure of aspen (Populus tremuloides) and birch (Betula papyrifera) in the Aspen FACE experiment, E. Oksanen, J. Sober, and D. F. Karnosky
Measurement of dynamic parameters of automotive exhaust hangers, Mohan D. Rao, Scott Gruenberg, and Dave Griffiths
Control strategies for a series-parallel hybrid electric vehicle, Dimitrios Rizoulis, Jeffrey Burl, and John Beard
Works from 2000
Effect of elongational viscosity on axisymmetric entrance flow of polymers, Mahesh Gupta
Three-dimensional simulation of microchip encapsulation process, Ruihua Han, Linhuo Shi, and Mahesh Gupta
Fundamental studies of diesel particulate filters: Transient loading, regeneration and aging, Athanasios G. Konstandopoulos, Margaritis Kostoglou, Evangelos Skaperdas, Eleni Papaioannou, Dimitrios Zarvalis, and Evdoxia Kladopoulou
Modernization of the Mechanical Engineering Curriculum and Guidelines for Computer-Aided Engineering Instruction, Sheryl Sorby, Graham Walker, Miles Yano, Vladimir Glozman, Kevin Kochersberger, Judy Mathers, John Mckinney, James Schulman, and Michael Young
An experimental and modeling study of cordierite traps - Pressure drop and permeability of clean and particulate loaded traps, Arvind Suresh, Amjad Khan, and John H. Johnson
Measuring the six dof driving point impedance function and an application to RB inertia property estimation, M. C. Witter, D. L. Brown, and J. R. Blough
Works from 1999
Determination of residual stress fields beneath a Vickers indentation using photoelasticity, R. J. Anton, I. Miskioglu, and G. Subhash
Generalized Predictive Kinetic Energy Controller for vibration suppression in turning, Sohel Anwar and Abhijit Chandra
The vehicle engine cooling system simulation part 1 - Model development, Oner Arici, John H. Johnson, and Ajey J. Kulkarni
Development of an FRF based order tracking technique to separate close and/or crossing orders, Jason Blough and Geoffrey Gwaltney
Post-processing analysis of large channel count order track tests and estimation of linearly independent operating shapes, Jason Blough and Geoffrey Gwaltney
Summary and characteristics of rotating machinery digital signal processing methods, Jason Blough and Geoffrey Gwaltney
A three-dimensional engineering curriculum, Peck Cho
Extraction/filtration of transients embedded in stationary signals using wavelets; Focus on extraction of frequency response functions, Myles Dexter, Harold A. Evensen, Charles Van Karsen, and Jason Blough
Practical aspects of making NAH measurements, S. M. Dumbacher, D. L. Brown, J. R. Blough, and R. W. Bono
Dislocations and disclinations in gradient elasticity, M. Yu Gutkin and E. C. Aifantis