Submissions from 2016
Experimental characterization of heat transfer in an additively manufactured polymer heat exchanger, Martinus A. Arie, Amir H. Shooshtari, Ratnesh Tiwari, Serguei V. Dessiatoun, Michael M. Ohadi, and Joshua M. Pearce
Solute-derived thermal stabilization of nano-sized grains in melt-spun aluminum, Andrew H. Baker, Paul G. Sanders, E. A. Lass, Deepak Kapoor, and S. L. Kampe
Biodegradable metals for cardiovascular stents: from clinical concerns to recent Zn‐alloys, Patrick Bowen, Emily Shearier, S. Zhao, Roger J. Guillory II, Feng Zhao, Jeremy Goldman, and Jaroslaw Drelich
Overview: Magnesium-Based Biodegradable Implants, Patrick Bowen and Wim H. Sillekens
Characterization of minerals, metals, and materials 2015, John S. Carpenter, Chenguang Bai, Juan Pablo Escobedo, Jiann yang Hwang, Shadia Ikhmayies, Bowen Li, Jian Li, Sergio Neves Monteiro, Zhiwei Peng, and Mingming Zhang
Excellent capacitive deionization performance of meso-carbon microbeads, Liang Chang and Yun Hang Hu
Dubinin-Astakhov model for acetylene adsorption on metal-organic frameworks, Peifu Cheng and Yun Hang Hu
Acetylene adsorption on defected MIL-53, Peifu Cheng and Yun Hang Hu
Mechanically-induced reverse phase transformation of MoS2 from stable 2H to metastable 1T and its memristive behavior, Peifu Cheng, Kai Sun, and Yun Hang Hu
Memristive Behavior and Ideal Memristor of 1T Phase MoS2 Nanosheets, Peifu Cheng, Kai Sun, and Yun Hang Hu
Cost-effectiveness of interventions for alternate food to address agricultural catastrophes globally, David C. Denkenberger and Joshua M. Pearce
Open source laboratory sample rotator mixer and shaker, Karankumar C. Dhankani and Joshua M. Pearce
Importance of oxide film in endovascular biodegradable zinc stents, Adam J. Drelich, Patrick Bowen, Leslie LaLonde, Jeremy Goldman, and Jaroslaw W Drelich
A novel biodegradable frontal sinus stent (MgNd2): a long-term animal study, M. Durisin, J. M. Seitz, J. Reifenrath, C. M. Weber, R. Eifler, H. J. Maier, T. Lenarz, and C. Klose
MgNd2 alloy in contact with nasal mucosa: an in vivo and in vitro approach, R. Eifler, J. M. Seitz, C. M. Weber, S. Grundke, J. Reifenrath, M. Kietzmann, T. H. Lenarz, H. J. Maier, C. Klose, and M. Durisin
Atomic Force Microscopy for Characterization of Surfaces, Particles, and Their Interactions, Frank M. Etzler and Jaroslaw Drelich
Surface-charge anisotropy of scheelite crystals, Zhiyong Gao, Yuehua Hu, Wei Sun, and Jaroslaw W. Drelich
Domain wall creep in magnetic thin films near the depinning transition, L. D. Geng and Y. M. Jin
Corrosion characteristics dictate the long-term inflammatory profile of degradable zinc arterial implants, Roger J. Guillory II, Patrick Bowen, Sean Hopkins, Emily Shearier, Elisha J. Earley, Amani Gillette, and et al.
High-efficiency solar-powered 3-D printers for sustainable development, Jephias Gwamuri, Dhiogo Franco, Khalid Khan, Lucia Gauchia, and Joshua M. Pearce
Influence of oxygen concentration on the performance of ultra-thin RF magnetron sputter deposited indium tin oxide films as a top electrode for photovoltaic devices, Jephias Gwamuri, Murugesan Marikkannan, J. Mayandi, Patrick Bowen, and Joshua M. Pearce
A new method of preparing highly conductive ultra-thin indium tin oxide for plasmonic-enhanced thin film solar photovoltaic devices, Jephias Gwamuri, Ankit Vora, Jeyanthinath Mayandi, Durdo O. Guney, Paul L. Bergstrom, and Joshua M. Pearce
MoS2 as a co-catalyst for photocatalytic hydrogen production from water, Bing Han and Yun Hang Hu
Efficient Visible Light Photocatalytic CO2 Reforming of CH4, Bing Han, Wei Wei, Liang Chang, Peifu Cheng, and Yun Hang Hu
One-step green approach for synthesizing highly ordered pillaring materials via ultrafast transportation, Qing Qing Hao, Yong Hong Song, Bingsen Zhang, Huan Huan Yang, Jian Gang Chen, Yong Hua Zhao, Zhao Tie Liu, Yun Hang Hu, Zhong Wen Liu, Wei Wang, Dang Sheng Su, and Jian Lu
Structure-property relationships of common aluminum weld alloys utilized as feedstock for GMAW-based 3-D metal printing, Amberlee S. Haselhuhn, Michael W. Buhr, Bas Wijnen, Paul G. Sanders, and Joshua M. Pearce
Eli Ruckenstein - A model for science and engineering research, Yun Hang Hu
Characterization of minerals, metals, and materials 2016, Shadia Jamil Ikhmayies, Bowen Li, John S. Carpenter, Jiann-Yang Hwang, Sergio Neves Monteiro, Jian Li, Donato Firrao, Mingming Zhang, Zhiwei Peng, Juan P. Escobedo-Diaz, and Chenguang Bai
Advances in energy and fuels, Fangming Jin and Yun Hang Hu
Advances in energy and fuels: A preface to the special issue section on the 2nd China-USA symposium on energy, Shanghai, China, June 26-28 2015, Fangming Jin and Yun Hang Hu
The characterization of the desulfurization powder in the semi-dry de-SO < inf> 2 process of the sintering plant exhaust gas and its interaction with the soil particles, Ling Chen Kang, Li Jun Lu, Gai Feng Xue, and Jiann-Yang Hwang
Emerging economic viability of grid defection in a northern climate using solar hybrid systems, Abhilash Kantamneni, Richelle Winkler, Lucia Gauchia, and Joshua M. Pearce
Global value chains from a 3D printing perspective, André O. Laplume, Bent Petersen, and Joshua Pearce
Open source laser polymer welding system: design and characterization of linear low-density polyethylene multilayer welds, John Laureto, Serguei V. Dessiatoun, Michael M. Ohadi, and Joshua M. Pearce
Nuclear insurance subsidies cost from post-Fukushima accounting based on media sources, John Laureto and Joshua M. Pearce
Synthesis and characteristics of anorthite ceramics from Steelmaking slag, Bowen Li, Mingsheng He, Jiann Yang Hwang, and Wangui Gan
High-Rate, Durable Sodium-Ion Battery Cathode Enabled by Carbon-Coated Micro-Sized Na < inf> 3 V < inf> 2 (PO < inf> 4 ) < inf> 3 Particles with Interconnected Vertical Nanowalls, Hui Li, Xuanxuan Bi, Ying Bai, Yifei Yuan, Reza Shahbazian-Yassar, Chuan Wu, Feng Wu, Jun Lu, and Khalil Amine
Catalytic behavior of graphene oxide for cement hydration process, Changqing Lin, Wei Wei, and Yun Hang Hu
Retraining investment for U.S. transition from coal to solar photovoltaic employment, Edward P. Louie and Joshua M. Pearce
Experimental study on quality evaluation of calcium-based agents for desulfurization of sinter gas on SDA, Lijun Lu, Jiann-Yang Hwang, Lingchen Kang, Likun Li, Honghui Fang, and Ying Liu
Electrical effect and influence factors of tourmaline, Qi Lu, Bowen Li, and Feng Bai
The effect of cold work on the precipitation and recrystallization kinetics in Al-Sc-Zr alloys, C. T. McNamara, S. L. Kampe, P. G. Sanders, and D. J. Swenson
A review of technical requirements for plug-and-play solar photovoltaic microinverter systems in the United States, Aishwarya Shrikant Mundada, Yuenyong Nilsiam, and Joshua M. Pearce
U.S. market for solar photovoltaic plug-and-play systems, Aishwarya Shrikant Mundada, Emily Prehoda, and Joshua M. Pearce
Levelized cost of electricity for solar photovoltaic, battery and cogen hybrid systems, Aishwarya Shrikant Mundada, Kunal K. Shah, and Joshua M. Pearce
U.S. market for solar photovoltaic plug-and-play systems, Aishwarya S. Mundada, Emily W. Prehoda, and Joshua M. Pearce
Cascade Bayesian optimization, Thanh Dai Nguyen, Sunil Gupta, Santu Rana, Vu Nguyen, Svetha Venkatesh, Kyle Deane, and Paul G. Sanders
Open source database and website to provide free and open access to inactive U.S. patents in the public domain, Yuenyong Nilsiam and Joshua M. Pearce
Are you overpaying your academic executive team? A method for detecting unmerited academic executive compensation, Joshua M. Pearce
Photovoltaic materials and electronic devices, Joshua M. Pearce
Undermined by overhead accounting, Joshua M. Pearce
Open-source wax RepRap 3-D printer for rapid prototyping paper-based microfluidics, Joshua M. Pearce, Gerald C. Anzalone, and C. L. Heldt
Resonances of microwave power absorption in alumina and silicon carbide, Zhiwei Peng, Xiaolong Lin, Jiann-Yang Hwang, Yuzhe Zhang, Yuanbo Zhang, Guanghui Li, and Tao Jiang
The Influence of Low Temperature Clustering on Strengthening Precipitation IN Al-Mg-Si Alloys, Alex Poznak and Paul Sanders
The influence of low temperature clustering on strengthening precipitation in ams alloy, Alex Poznak and Paul G. Sanders
Susceptibility of metallic magnesium implants to bacterial biofilm infections, Muhammad Imran Rahim, Manfred Rohde, Bushra Rais, Jan Marten Seitz, and Peter P. Mueller
Evaluation of the inflammatory potential of implant materials in a mouse model by bioluminescent imaging of intravenously injected bone marrow cells, Bushra Rais, Mario Köster, Muhammad Imran Rahim, Marina Pils, J. M. Seitz, Hansjörg Hauser, Dagmar Wirth, and Peter P. Mueller
Novel nanomaterials for photocatalysis, photochemistry, and photobiology, Vicente Rodríguez-González, Agileo Hernandez-Gordillo, and Yun Hang Hu
Disordered 3 D Multi-layer Graphene Anode Material from CO2for Sodium-Ion Batteries, Kassiopeia Smith, Riley Parrish, Wei Wei, Yuzi Liu, Tao Li, Yun Hang Hu, and Hui Xiong
Viability of distributed manufacturing of bicycle components with 3-D printing: CEN standardized polylactic acid pedal testing, Nagendra Gautam Tanikella, Benjamin L. Savonen, John K. Gershenson, and Joshua M. Pearce
Lengthscale effects on exchange coupling in Co-Pt L10 + L12 nanochessboards, Eric P. Vetter, Liwei D. Geng, Priya Ghatwai, Dustin A. Gilbert, Yongmei M. Jin, William A. Soffa, and Jerrold A. Floro
Tuning shape of three dimensional graphene sheets, Hui Wang, Wei Wei, and Yun Hang Hu
The Bright Future for Electrode Materials of Energy Devices: Highly Conductive Porous Na-Embedded Carbon, Wei Wei, Liang Chang, Kai Sun, Alexander J. Pak, Eunsu Paek, Gyeong S. Hwang, and Yun Hang Hu
3D MoS2/Graphene hybrid layer materials as counter electrodes for dye-sensitized solar cells, Wei Wei and Yun Hang Hu
Direct conversion of CO2 to 3D graphene and its excellent performance for dye-sensitized solar cells with 10% efficiency, Wei Wei, Kai Sun, and Yun Hang Hu
An efficient counter electrode material for dye-sensitized solar cells - Flower-structured 1T metallic phase MoS2, Wei Wei, Kai Sun, and Yun Hang Hu
Free and open-source control software for 3-D motion and processing, Bas Wijnen, G. C. Anzalone, Amberlee S. Haselhuhn, Paul G. Sanders, and Joshua M. Pearce
Free and open-source automated 3-D microscope, Bas Wijnen, Emily E. Petersen, Emily J. Hunt, and Joshua M. Pearce
3-D printing solar photovoltaic racking in developing world, Ben Wittbrodt and Joshua M. Pearce
3-D printing solar photovoltaic racking in developing world, Ben T. Wittbrodt and Joshua M. Pearce
Platinum-Coated Hollow Graphene Nanocages as Cathode Used in Lithium-Oxygen Batteries, Feng Wu, Yi Xing, Xiaoqiao Zeng, Yifei Yuan, Xiaoyi Zhang, Reza Shahbazian-Yassar, Jianguo Wen, Dean J. Miller, Li Li, Renjie Chen, Jun Lu, and Khalil Amine
Physical and chemical properties of MSWI fly ash, He Xinghua, Zhu Shujing, and Jiann-Yang Hwang
Plasmonic enhancement of amorphous silicon solar photovoltaic cells with hexagonal silver arrays made with nanosphere lithography, C Zhang, Durdo O. Guney, and Joshua M. Pearce
Open-source 3-D platform for low-cost scientific instrument ecosystem, C. Zhang, Bas Wijnen, and Joshua M. Pearce
Experimental study of advanced treatment of coking wastewater using MBR-RO combined process, Lei Zhang, Jiann-Yang Hwang, Ting Leng, Gaifeng Xue, and Hongbing Chang
Discussion on coking wastewater treatment and control measures in iron and steel enterprises, Lei Zhang, Jiann-Yang Hwang, Ting Leng, Gaifeng Xue, and Gaoming Wu
Microwave heating of waste tires, Yuzhe Zhang, Jiann yang Hwang, Zhiwei Peng, Matthew Andriese, Bowen Li, Xiaodi Huang, Xinli Wang, and Likun Li
Making ultrafine and highly-dispersive multimetallic nanoparticles in three-dimensional graphene with supercritical fluid as excellent electrocatalyst for oxygen reduction reaction, Yazhou Zhou, Clive H. Yen, Yun Hang Hu, Chongmin Wang, Xiaonong Cheng, Chien M. Wai, Juan Yang, and Yuehe Lin
Solidification of dredged sludge by Hydraulic ash-slag cementitious materials, Shu Jing Zhu, Ying Qin, and Jiann Yang Hwang
Solidification of dredged sludge by hydraulic ash-slag cementitious materials, Shu Jing Zhu, Ying Qin, and Jiann-Yang Hwang
Submissions from 2015
A Virtual Educational Exchange: A North–South Virtually Shared Class on Sustainable Development, Augusta Abrahamse, Mathew Johnson, Nanette Levinson, Larry Medsker, Joshua M. Pearce, Carla Quiroga, and Ruth Scipione
Controlling optical absorption in metamaterial absorbers for plasmonic solar cells, Wyatt Adams, Ankit Vora, Jephias Gwamuri, Joshua M. Pearce, and Durdo O. Guney
Photovoltaic system performance enhancement with nontracking planar concentrators: Experimental results and bidirectional reflectance function (BDRF)-based modeling, Rob W. Andrews, Andrew Pollard, and Joshua M. Pearce
Multi-material additive and subtractive prosumer digital fabrication with a free and open-source convertible delta RepRap 3-D printer, Gerald C. Anzalone, Bas Wijnen, and Joshua M. Pearce
Erratum to: Resilience to global food supply catastrophes (Environ Syst Decis, (2015), 35, (301-313), DOI 10.1007/s10669-015-9549-2), Seth D. Baum, David C. Denkenberger, Joshua M. Pearce, Alan Robock, and Richelle Winkler
Resilience to global food supply catastrophes, Seth D. Baum, David C. Denkenberger, Joshua M. Pearce, Alan Robock, and Richelle Winkler
3D flower-structured graphene from CO2 for supercapacitors with ultrahigh areal capacitance at high current density, Liang Chang, Wei Wei, Kai Sun, and Yun Hang Hu
Recovery of Silver and Gold from Copper Anode Slimes, Ailiang Chen, Zhiwei Peng, Jiann Yang Hwang, Yutian Ma, Xuheng Liu, and Xingyu Chen
Novel design for the odd-symmetric memristor from asymmetric switches, Peifu Cheng and Yun Hang Hu
Educational pathways to remote employment in isolated communities, David C. Denkenberger, Julia Way, and Joshua M. Pearce
Feeding Everyone No Matter What: Managing Food Security After Global Catastrophe, David Denkenberger and Joshua Pearce
The potential of agrivoltaic systems, Harshavardhan Dinesh and Joshua M. Pearce
Solar photovoltaic powered on-site ammonia production for nitrogen fertilization, Z. Du, David C. Denkenberger, and Joshua M. Pearce
Altering critical depinning current via domain wall pile-up in magnetic nanowires, Liwei D. Geng and Yongmei M. Jin
Limitations of Ultra-thin Transparent Conducting Oxides for Integration into Plasmonic-enhanced Thin-film Solar Photovoltaic Devices, Jephias Gwamuri, Ankit Vora, Rajendra R. Khanal, Adam B. Phillips, Michael J. Heben, Durdo O. Guney, Paul Bergstrom, Anand Kulkarni, and Joshua M. Pearce
Highly Efficient Temperature-Induced Visible Light Photocatalytic Hydrogen Production from Water, Bing Han and Yun Hang Hu
In Situ Formation of Substrate Release Mechanisms for Gas Metal Arc Weld Metal 3-D Printing, Amberlee S. Haselhuhn, Bas Wijnen, Gerald C. Anzalone, Paul G. Sanders, and Joshua M. Pearce
Impact of snow and ground interference on photovoltaic electric system performance, Negin Heidari, Jephias Gwamuri, Tim Townsend, and Joshua M. Pearce
A review of greenhouse gas emission liabilities as the value of renewable energy for mitigating lawsuits for climate change related damages, Negin Heidari and Joshua M. Pearce
Polymer Recycling Codes for Distributed Manufacturing with 3-D Printers, Emily J. Hunt, Chenlong Zhang, Nicholas C. Anzalone, and Joshua M. Pearce