Explore a selection of works produced by faculty in the Department of Materials Science and Engineering at Michigan Technological University.

Follow

Works from 2019

Link

The potential for grid defection of small and medium sized enterprises using solar photovoltaic, battery and generator hybrid systems, Trevor B. Peffley and Joshua M. Pearce

PDF

Low-cost open source ultrasound-sensing based navigational support for the visually impaired, Aliaksei Petsiuk and Joshua M. Pearce

PDF

Open Source Waste Plastic Granulator, Arvind Ravindran, Sean Scsavnicki, Walker Nelson, Peter Gorecki, Jacob Franz, Shane Oberloier, Theresa K. Meyer, Andrew Barnard, and Joshua M. Pearce

PDF

Mechanical properties and applications of recycled polycarbonate particle material extrusion-based additive manufacturing, Matthew J. Reich, Aubrey Woern, Nagendra Gautam Tanikella, and Joshua M. Pearce

Link

Differences in Snow Shedding in Photovoltaic Systems with Framed and Frameless Modules, Daniel Riley, Laurie Burnham, Bevan Walker, and Joshua M. Pearce

PDF

Scalable honeycomb top contact to increase the light absorption and reduce the series resistance of thin film solar cells, Mehdi Sadatgol, Nupur Bihari, Joshua M. Pearce, and Durdo O. Guney

Link

ICME applied in the undergraduate capstone senior design sequence, Paul G. Sanders

Link

Open-source three-dimensional printable infant clubfoot brace, Benjamin L. Savonen, Jennifer Bow, and Joshua M. Pearce

Link

Bridging the social and environmental dimensions of global sustainability in STEM education with additive manufacturing, Chelsea Schelly and Joshua M. Pearce

Link

Dual morphology titanium dioxide for dye sensitized solar cells, R. Selvapriya, J. Mayandi, V. Ragavendran, V. Sasirekha, J. Vinodhini, and Joshua M. Pearce

PDF

Systems analysis for PET and olefin polymers in a circular economy, David R. Shonnard, Emily Tipaldo, Vicki Thompson, Joshua M. Pearce, Gerard T. Caneba, and Robert Handler

Link

Analysis of local grain boundary strengthening utilizing the extrinsic indentation size effect, Prasad Pramod Soman, Erik G. Herbert, Katerina E. Aifantis, and Stephan A. Hackney

Link

Analysis of local grain boundary strengthening utilizing the extrinsic indentation size effect, Prasad Pramod Soman, Erik G. Herbert, Katerina E. Aifantis, and Stephen Hackney

PDF

Open source completely 3-D printable centrifuge, Salil S. Sule, Aliaksei Petsiuk, and Joshua M. Pearce

Link

Photo-assisted methanol steam reforming on solid solution of Cu-Zn-Ti oxide, Zhuxing Sun, Siyuan Fang, Yan Lin, and Yun Hang Hu

Link

Novel binder-free three-dimensional MoS2-based electrode for efficient and stable electrocatalytic hydrogen evolution, Zhuxing Sun, Mengfei Yang, Yiwen Wang, and Yun Hang Hu

Link

Rapid flocculation-sedimentation of microalgae with organosilane-functionalized halloysite, Daoyong Tan, Haiyang Zhang, Shiyong Sun, Faqin Dong, Hongjuan Sun, and Bowen Li

Link

Alumina-enhanced valorization of ferronickel slag into refractory materials under microwave irradiation, Huiming Tang, Zhiwei Peng, Foquan Gu, Lei Ye, Jiann-Yang Hwang, and Mingjun Rao

Link

Influence of surface etching and oxidation on the morphological growth of Al2O3 by ALD, Mikhail Trought, Isobel Wentworth, Chathura de Alwis, Timothy Leftwich, and Kahryn Perrine

Link

Influence of metal assisted chemical etching time period on mesoporous structure in as-cut upgraded metallurgical grade silicon for solar cell application, Ragavendran Venkatesan, Jeyanthinath Mayandi, Joshua M. Pearce, and Vishnukanthan Venkatachalapathy

Link

Effect of microwave power irradiation on TiO2 nano-structures and binder free paste screen printed dye sensitized solar cells, J. Vinodhini, J. Vinodhini, J. Mayandi, R. Atchudan, P. Jayabal, V. Sasirekha, and Joshua M. Pearce

Link

Highly selective production of C5-C12 hydrocarbons over efficient Ru/heteropoly-acid catalysts, Chunling Wang, Jiong Yang, Yongxing Sun, Qian Li, Ying Zheng, and Yun Hang Hu

Link

Surface modification of LiNi0.5Co0.2Mn0.3O2 cathode materials with Li2O‐B2O3‐LiBr for lithium‐ion batteries, Lei Wang and Yun Hang Hu

Link

Lithium-chemical synthesis of highly conductive 3D mesoporous graphene for highly efficient new generation solar cells, Wei Wei

Link

Applications of 3D potassium-ion pre-intercalated graphene for perovskite and dye-sensitized solar cells, Wei Wei, Meijia Li, and Yun Hang Hu

Link

Lithium-chemical synthesis of highly conductive 3D mesoporous graphene for highly efficient new generation solar cells, Wei Wei, Dario Stacchiola, Nusnin Akter, J. Anibal Boscoboinik, and Yun Hang Hu

Link

Effect of Mg content on Al3Sc-dispersoid formation in cast billets of Al-Mg-Sc alloys, Carson Williams, Thomas D. Wood, Paul G. Sanders, and Timothy Langan

Link

Thermo–Photo Catalysis for Methanol Synthesis from Syngas, Xuechen Wu, Junyu Lang, Yueyue Jiang, Yan Lin, and Yun Hang Hu

Link

Novel SW2-based 3D electrode with protecting scaffold for efficient and stable hydrogen evolution, Mengfei Yang, Zhuxing Sun, and Yun Hang Hu

Link

Structural alteration of montmorillonite by acid activation and its effect on the decolorization of rapeseed oil, Mengna Yang, Hongjuan Sun, Tongjiang Peng, Bowen Li, and Yanyan Xie

Link

Precipitation hardening via chemically ordered L12 precipitates in Al-Sc-Zr Alloys - New insights using combined STEM and EDS study, Yang Yang, Amlan Mukherjee, and Paul G. Sanders

Link

Precipitation hardening of supersaturated Al–Sc–Zr produced via melt-spinning, Yang Yang and Paul G. Sanders

Link

Reverse flotation separation of hematite from quartz assisted with magnetic seeding aggregation, Wanzhong Yin, Donghui Wang, Jaroslaw Drelich, Bin Yang, Dong Li, Zhanglei Zhu, and Jin Yao

Link

Co(II) triggered radical reaction between SO2 and o-phenylenediamine for highly selective visual colorimetric detection of SO2 gas and its derivatives, Haili Yu, Faqin Dong, Bowen Li, and Frank S. Riehle

Link

Mo6S8-based single-metal-atom catalysts for direct methane to methanol conversion, Hao-Tian Zhang, Cheng Liu, Ping Liu, and Yun Hang Hu

Link

Urban mining: Characterization and recycling of solid wastes, Mingming Zhang and Bowen Li

Link

Preparation of pyrolytic carbon from waste tires for methylene blue adsorption, Yuzhe Zhang, Qian Cheng, Dandan Wang, Da Xia, Xudong Zheng, Zhongyu Li, and Jiann-Yang Hwang

Link

Enhanced Photocatalytic Production of H2O2 by Nafion Coatings on S,N-Codoped Graphene-Quantum-Dots-Modified TiO2, Longhui Zheng, Jingzhen Zhang, Yun Hang Hu, and Mingce Long

Link

Photocatalytic conversion of ethane: status and perspective, Yao Zhu, Shangli Shi, Chunling Wang, and Yun Hang Hu

Submissions from 2018

Link

Open-source parametric 3-D printed slot die system for thin film semiconductor processing, L. Y. Beeker, Adam Pringle, and Joshua M. Pearce

Link

3-D printable open source dual axis gimbal system for optoelectronic measurements, Nupur Bihari, Smruti P. Dash, Karankumar C. Dhankani, and Joshua M. Pearce

Link

Decarbonizing the boardroom? Aligning electric utility executive compensation with climate change incentives, Cleyton Cavallaro, Joshua M. Pearce, and Roman Sidortsov

Link

Highly conductive porous Na-embedded carbon nanowalls for high-performance capacitive deionization, Liang Chang and Yun Hang Hu

Link

3D Channel-structured graphene as efficient electrodes for capacitive deionization, Liang Chang and Yun Hang Hu

Link

Surface-microporous graphene for high-performance capacitive deionization under ultralow saline concentration, Liang Chang and Yun Hang Hu

Link

Design and Synthesis of 3D Potassium-Ion Pre-Intercalated Graphene for Supercapacitors, Liang Chang, Dario J. Stacchiola, and Yun Hang Hu

Link

New chemistry for new material: Highly dense mesoporous carbon electrode for supercapacitors with high areal capacitance, Liang Chang, Kai Sun, and Yun Hang Hu

Link

MACE nano-texture process applicable for both single- and multi-crystalline diamond-wire sawn Si solar cells, Kexun Chen, Jiawei Zha, Fenqin Hu, Shuai Zou, Ville Vähänissi, Joshua M. Pearce, Hele Savin, and Xiaodong Su

PDF

Effect of Zr additions on thermal stability of Al-Cu precipitates in as-cast and cold worked samples, Kyle Deane and Paul G. Sanders

Link

Expanded microchannel heat exchanger: Nondestructive evaluation, David C. Denkenberger, Michael J. Brandemuehl, Joshua M. Pearce, and John Zhai

PDF

Design optimization of polymer heat exchanger for automated household-scale solar water pasteurizer, David C. Denkenberger and Joshua M. Pearce

PDF

Micronutrient availability in alternative foods during agricultural catastrophes, David C. Denkenberger and Joshua M. Pearce

Link

Investigation of Al-Zn-Zr and Al-Zn-Ni alloys for high electrical conductivity and strength application, Oladeji Fadayomi, Rachel Clark, Violet Thole, Paul G. Sanders, and Gregory M. Odegard

Link

Recent progress in photocatalysts for overall water splitting, Siyuan Fang and Yun Hang Hu

PDF

Economic potential for distributed manufacturing of adaptive aids for arthritis patients n the U.S., Nicole Gallup, Jennifer Bow, and Joshua M. Pearce

Link

Controlling 180° transverse domain wall structure, Liwei D. Geng and Yongmei M. Jin

Link

Computational study of nonlinear dielectric composites with field-induced antiferroelectric-ferroelectric phase transition, Liwei D. Geng, Yongmei M. Jin, Daniel Q. Tan, and Yu U. Wang

Link

Exchange coupling effects in Co-Pt nanochessboards, Liwei D. Geng, William A. Soffa, Jerrold A. Floro, and Yongmei M. Jin

PDF

Coal with carbon capture and sequestration is not as land use efficient as solar photovoltaic technology for climate neutral electricity production, James Gunnar Groesbeck and Joshua M. Pearce

Link

Kinetic analysis and thermodynamic simulation of alkali‐silica reaction in cementitious materials, Shuaicheng Guo, Qingli Dai, Liang Chang, Yun Hang Hu, Xinfeng Xie, Ruizhe Si, and Jiaqing Wang

Link

Preparation for high activity degree lime and effect on desulfurization of hot metal pretreatment, Suju Hao, Jiann Yang Hwang, Wufeng Jiang, and Yuzhu Zhang

Link

Chemical compatibility of fused filament fabrication-based 3-D printed components with solutions commonly used in semiconductor wet processing, Ismo T. S. Heikkinen, Christoffer Kauppinen, Zhengjun Liu, Sanja M. Asikainen, Steven Spoljaric, Jukka V. Seppälä, Hele Savin, and Joshua M. Pearce

Link

Preparation and characteristics of steel slag ceramics from converter slag, Mingsheng He, Bowen Li, Wangzhi Zhou, Huasheng Chen, Meng Liu, and Long Zou

Link

Reduction of CO2 with H2S in a simulated deep-sea hydrothermal vent system, Runtian He, Baoyun Hu, Heng Zhong, Fangming Jin, Junjie Fan, Yun Hang Hu, and Zhenzi Jing

PDF

Approaches to open source 3-D printable probe positioners and micromanipulators for probe stations, Iiro Hietanen, Ismo T. S. Heikkinen, Hele Savin, and Joshua M. Pearce

PDF

Energy science and engineering: Looking ahead, Yun Hang Hu

Link

Dye-Sensitized Materials, Yun Hang Hu and Wei Wei

Link

Effect of carbon coating on magnetite reduction, Wufeng Jiang, Jiann Yang Hwang, Suju Hao, and Yuzhu Zhang

Link

Spontaneous spreading of a droplet: The role of solid continuity and advancing contact angle, Youhua Jiang, Yujin Sun, Jaroslaw W. Drelich, and Chang-Hwan Choi

Link

Photocatalytic conversion of CO2 over C3N4-based catalysts, Binbin Jin, Guodong Yao, Fangming Jin, and Yun Hang Hu

PDF

The suitability of Zn–1.3% Fe alloy as a biodegradable implant material, Alon Kafri, Shira Ovadia, Jeremy Goldman, Jaroslaw W. Drelich, and Eli Aghion

Link

Lorentz Transmission Electron Microscopy Image Simulations of Experimental Nano-Chessboard Observations in Co-Pt Alloys, Isha Kashyap, Yongmei M. Jin, Eric P. Vetter, Jerrold A. Floro, and Marc De Graef

PDF

Self-sufficiency of 3-D printers: utilizing stand-alone solar photovoltaic power systems, Khalid Yousuf Khan, Lucia Gauchia, and Joshua M. Pearce

Link

Economic impact of substituting solar photovoltaic electric production for tobacco farming, Ram Krishnan and Joshua M. Pearce

Link

Chemical synthesis and characterization of nano alumina, nano composite of carbon–alumina and their comparative studies, Saravanan Vanal Krishnan, Sivakumar Palanivelu, Muthu Manickam Muthukaruppan Ambalam, Ragavenfran Vekatesan, Muthukumar Arivalagan, Joshua M. Pearce, and Jeyanthinath Mayandi

Link

Anisotropic mechanical property variance between ASTM D638-14 type i and type iv fused filament fabricated specimens, John Laureto and Joshua M. Pearce

Link

Characteristics of WISCO steelmaking slags, Bowen Li, Mingsheng He, and Canhua Li

Link

Advanced materials and processes for energy conversion, storage, and utilization, Qian Li and Yun Hang Hu

Link

Single-phase electronic-ionic conducting Sm3+/Pr3+/Nd3+ triple-doped ceria for new generation fuel cell technology, Yanyan Liu, Mahr Naveed Mushtaq, Wei Zhang, Aijun Teng, and Xueqi Liu

Link

Porous graphene doped with Fe/N/S and incorporating Fe3O4 nanoparticles for efficient oxygen reduction, Yi Li, Yazhou Zhou, Chengzhou Zhu, Yun Hang Hu, Shuai Gao, Qinqin Liu, and et. al.

Link

Fe-B alloy coupled with Fe clusters as an efficient cocatalyst for photocatalytic hydrogen evolution, Yuexiang Li, Hui Li, Yafei Li, Shaoqin Peng, and Yun Hang Hu

PDF

Economic advantages of dry-etched black silicon in passivated emitter rear cell (PERC) photovoltaic manufacturing, Chiara Modanese, Hannu S. Laine, Toni P. Pasanen, Hele Savin, and Joshua M. Pearce

Link

Zinc-based alloys for degradable vascular stent applications, Ehsan Mostaed, Malgorzata Urszula Sikora-Jasinska, Jaroslaw W. Drelich, and Maurizio Vedani

Link

Properties of Al-doped zinc oxide and In-doped zinc oxide bilayer transparent conducting oxides for solar cell applications, Marikkannan Murugesan, Dinesh Arjunraj, J Mayandi, Vishnukanthan Venkatachalapathy, and Joshua M. Pearce

PDF

Applications of open source GMAW-based metal 3-D printing, Yuenyong Nilsiam, Paul G. Sanders, and Joshua M. Pearce

PDF

Belt-driven open source circuit mill using low-cost 3-D printer components, Shane W. Oberloier and Joshua M. Pearce

PDF

Open source low-cost power monitoring system, Shane W. Oberloier and Joshua M. Pearce

Link

Prospects of applying 3-D printing to economics of remote communities: Reindeer herder case, Svetlana V. Obydenkova, Nicholas C. Anzalone, and Joshua M. Pearce

Link

Prospects of applying 3-D printing to economics of remote communities: Reindeer herder case, Svetlana V. Obydenkova, Nicholas C. Anzalone, and Joshua M. Pearce

Link

Ensuring technical competency for management of research-focused organizations, Joshua M. Pearce

Link

Expanding the Consumer Bill of Rights for material ingredients, Joshua M. Pearce

Link

How to perform a literature review with free and open source software, Joshua M. Pearce

PDF

Sponsored libre research agreements to create free and open source software and hardware, Joshua M. Pearce

PDF

A national pragmatic safety limit for nuclear weapon quantities, Joshua M. Pearce and David C. Denkenberger

Link

Composition dependent thermal stability and evolution of solute clusters in Al-Mg-Si analyzed using atom probe tomography, Alex Poznak, R. K.W. Marceau, and Paul George Sanders

PDF

The natural aging effect on hardenability in Al-Mg-Si: A complex interaction between composition and heat treatment parameters, Alex Poznak, Violet Thole, and Paul G. Sanders

Link

Wood furniture waste–based recycled 3-D printing filament, Adam Pringle, Mark Rudnicki, and Joshua M. Pearce

PDF

Development of a resilient 3-D printer for humanitarian crisis response, Benjamin L. Savonen, Tobias Mahan, Maxwell W. Curtis, Jared W. Schreier, John K. Greshonen, and Joshua M. Pearce

Link

Synthesis, stabilization and applications of 2-dimensional 1T metallic MoS2, Shangli Shi, Zhuxing Sun, and Yun Hang Hu

Link

Synthesis, stabilization and applications of 2-dimensional 1T metallic MoS2, Shangli Shi, Zhuxing Sun, and Yun Hang Hu