Works from 2020
S-Vacancy induced indirect-to-direct band gap transition in multilayer MoS2, Bingyu Zhu, Junyu Lang, and Yun Hang Hu
Effect of nano-sized roughness on the flotation of magnesite particles and particle-bubble interactions, Zhanglei Zhu, Donghui Wang, Bin Yang, Wanzhong Yin, Morteza S. Ardakani, Jin Yao, and Jaroslaw Drelich
Water droplets and air bubbles at magnesite nano-rough surfaces: Analysis of induction time, adhesion and detachment using a dynamic microbalance, Zhanglei Zhu, Donghui Wang, Bin Yang, Wanzhong Yin, and Jaroslaw Drelich
G-C3N4-based photoelectrodes for photoelectrochemical water splitting: A review, Xingyue Zou, Zhuxing Sun, and Yun Hang Hu
Works from 2019
Interpreting slip transmission through mechanically induced interface energies: a Fe–3%Si case study, K. E. Aifantis, H. Deng, H. Shibata, S. Tsurekawa, P. Lejček, and S. A. Hackney
Comparison of methods to measure adsorptive capacity of coal fly ash, Gerald C. Anzalone, Ivan Diaz-Loya, Rafic Y. Minkara, and Lawrence L. Sutter
Mechanical properties of 3-D printed truss-like lattice biopolymer non-stochastic structures for sandwich panels with natural fibre composite skins, Lyes Azzouz, Yong Chen, Mauro Zarrelli, Joshua M. Pearce, Laslie Mitchell, Guogang Ren, and Marzio Grasso
Green fab lab applications of large-area waste polymer-based additive manufacturing, Dennis Byard, Aubrey Woern, Robert B. Oakley, Matthew J. Fiedler, Samantha Snabes, and Joshua M. Pearce
Advances in catalytic conversion of methane and carbon dioxide to highly valuable products, Xiaojiao Cai and Yun Hang Hu
Breakthroughs in designing commercial-level mass-loading graphene electrodes for electrochemical double-layer capacitors, Liang Chang and Yun Hang Hu
One-step synthesis of high surface-area honeycomb graphene clusters for highly efficient capacitive deionization, Liang Chang and Yun Hang Hu
Effect of styrene addition on chemically induced grafting of 4-vinylbenzyl chloride onto low-density polyethylene for anion exchange membrane preparation, Zhichao Chen, Di Huang, and Jiann-Yang Hwang
Effect of scandium on cast iron microstructure, Mason Coy, Katherine Russell, Erin Heidelberger, Paul G. Sanders, and Timothy Langan
Tomographic layer-by-layer analysis of epitaxial iron-silicide nanostructures by DFT-assisted STS, Matan Dascalu, Oswaldo Dieguez, Liwei D. Geng, Ranjit Pati, Yongmei M. Jin, and Ilan Goldfarb
Spontaneous selective deposition of iron oxide nanoparticles on graphite as model catalysts, Chathura de Alwis, Timothy Leftwich, Pinaki Mukherjee, Alex Denofre, and Kathryn Perrine
Fabrication of octagonal and dodecagonal single crystal Si micropyramids via etching without using a pre-patterned mask, Haokun Deng, Stephan A. Hackney, and Katerina E. Aifantis
Food without sun: price and life-saving potential, David C. Denkenberger, Joshua M. Pearce, Andrew Ray Taylor, and Ryan Black
Contact angles: From past mistakes to new developments through liquid-solid adhesion measurements, Jaroslaw Drelich
Contact angles: history of over 200 years of open questions, Jaroslaw Drelich, Ludmila Boinovich, Emil Chibowski, Claudio Della Volpe, Lucyna Holysz, and Stefano Siboni
Editorial, Jaroslaw Drelich, Ludmila Boinovich, and Ziqi Sun
Characterization of Biodegradable Medical Materials., Jaroslaw W Drelich
Microstructure and properties of precipitation-hardened Zr and Zn-Zr based aluminum alloys, Oladeji Fadayomi, Paul George Sanders, and Gregory M. Odegard
Creating and Seeing the First Pure Carbon Ring, Siyuan Fang and Yun Hang Hu
Recent advances in green, safe, and fast production of graphene oxide via electrochemical approaches, Siyuan Fang, Yan Lin, and Yun Hang Hu
Insights into the Thermo-Photo Catalytic Production of Hydrogen from Water on a Low-Cost NiOx-Loaded TiO2 Catalyst, Siyuan Fang, Zhuxing Sun, and Yun Hang Hu
Highly efficient thin zinc air batteries, Yuhuan Fei, Lei Wang, Yan Fang, Jei Deng, and Yun Hang Hu
Hierarchical structure and the origins of coercivity in exchange-coupled Co-Pt nanochessboards, J. A. Floro, E. P. Vetter, P. Ghatwai, Liwei D. Geng, Yongmei M. Jin, and W. A. Soffa
Computational study of cobalt-modified nickel-ferrite/PZT magnetoelectric composites for voltage tunable inductor applications, Liwei D. Geng, Yongke Yan, Shashank Priya, and Yu U. Wang
Interpreting electrochemical and chemical sodiation mechanisms and kinetics in tin antimony battery anodes using in situ transmission electron microscopy and computational methods, Jacob S. Gutiérrez-Kolar
A thermo-photo hybrid process for steam reforming of methane: highly efficient visible light photocatalysis, Bing Han, Wei Wei, Meijia Li, Kai Sun, and Yun Hang Hu
Texture evolution in Mg-8Sn-1Zn-1Al alloy during hot compression via competition between twinning and dynamic precipitation, Meijuan Hao, Weili Cheng, Lifei Wang, Ehsan Mostaed, Liping Bian, Hongxia Wang, and Xiaofeng Niu
On the mechanisms of stress relaxation and intensification at the lithium/solid-state electrolyte interface, Erik G. Herbert, Nancy Dudney, Marie Rochow, Violet Thole, and Stephan Hackney
Phase role of white TiO2 precursor in its reduction to black TiO2, Haiyang Hu, Yan Lin, and Yun Hang Hu
Synthesis, structures and applications of single component core-shell structured TiO2: A review, Haiyang Hu, Yan Lin, and Yun Hang Hu
Water repellency of hierarchically structured legs of water-walking striders and fire ants, Georgia Hurchalla and Jaroslaw Drelich
Special column: solar energy conversion, Yun Hang Hu and Fangming Jin
Macroscopic energy barrier and rate-independent hysteresis in martensitic transformations, Yongmei M. Jin, Yu U. Wang, and Armen G. Khachaturyan
Design and testing of a low-cost, open source, 3-D printed air-bearing-based attitude simulator for CubeSat satellites, Nemanja Jovanovic, Joshua M. Pearce, and Jaan Praks
Ystruder: Open source multifunction extruder with sensing and monitoring capabilities, Ville Klar, Joshua M. Pearce, Pyry Karki, and Petri Kuosmanen
Mechanical properties of ultraviolet-assisted paste extrusion and postextrusion ultraviolet-curing of three-dimensional printed biocomposites, Niklas Kretzschmar, Sami Lipponen, Ville Klar, Joshua M. Pearce, Tom L. Ragner, Jukka Seppala, and Jouni Partanen
Heat treatments for precipitation of scandium-containing dispersoids in an Si-containing aluminum alloys, Timothy Langan, Mahendra Ramjayam, Paul G. Sanders, Thomas D. Wood, and Thomas Dorin
Role of ZnO morphology in its reduction and photocatalysis, Yan Lin, Haiyang Hu, and Yun Hang Hu
Mechanochemical synthesis of defective molybdenum trioxide, titanium dioxide, and zinc oxide at room temperature, Rui Li, Jinhu Wang, Yi He, Faqin Dong, Liang Bian, and Bowen Li
Damage formation in Sn film anodes of Na-ion batteries, Tao Li, Umair Gulzar, Remo Proietti Zaccaria, Claudio Capiglia, Stephan A. Hackney, and K. E. Aifantis
Porous nickel fibers with enhanced electrocatalytic activities on electro-oxidation of ethanol in alkaline media, Yiyu Long, Jing Zhan, and Jianyang Huang
Preparation of phyrrhotite from ammonium jarosite and estimation of activation energy in reducing atmosphere, Xiaoling Ma, Hongbin Tan, Faqin Dong, Bowen Li, Jinfeng Liu, Yuanxiang Chen, and Lu Wang
Influence of troilite on the decomposition of ammonium jarosite and estimated activation energy, Xiaoling Ma, Hongbin Tan, Faqin Dong, Bowen Li, Jin Wang, Xiaochun He, and Changrong Liu
Synthesis of semimetallic tungsten trioxide for infrared light photoelectrocatalytic water splitting, Yuli Ma, Bo Feng, Junyu Lang, Fu Wang, and Yun Hang Hu
Microfactories for intracellular locally generated hydrogen therapy: Advanced materials, challenges, and opportunities, Yuli Ma, Fang Wu, and Yun Hang Hu
Novel high ionic conductivity electrolyte membrane based on semiconductor La0.65Sr0.3Ce0.05Cr0.5Fe0.5O3-Δ for low-temperature solid oxide fuel cells, Yuanjing Meng, Xunying Wang, Wei Zhang, Chen Xia, Ya nan Liu, Menghui Yuan, Bin Zhu, and Yuan Ji
Natural fibers reinforced polymer composites applied in ballistic multilayered armor for personal protection—An overview, Sergio Neves Montello, J. Drelich, Henry Alonso Colorado Lopera, Lucio Fabio Cassiano Nascimento, Fernando Santos da Luz, Luid Carlo da Silva, and et. al.
Precipitation induced room temperature superplasticity in Zn-Cu alloys., Ehsan Mostaed, Morteza S. Ardakani, Malgorzata Urszula Sikora-Jasinska, and Jaroslaw W Drelich
Compatibility of 3-D printed devices in cleanroom environments for semiconductor processing, T. P. Pasanen, G. von Gastrow, I. T.S. Heikkinen, V. Vahanissi, H. Savin, and Joshua M. Pearce
Limiting liability with positioning to minimize negative health effects of cellular phone towers, Joshua M. Pearce
Towards quantifiable metrics warranting industry-wide corporate death penalties, Joshua M. Pearce
Preliminary automated determination of edibility of alternative foods: Non-targeted screening for toxins in red maple leaf concentrate, Joshua M. Pearce, Maryam Khaksari, and David C. Denkenberger
Could 79 people solarize the U.S. electric grid?, Joshua M. Pearce and Emily Prehoda
The potential for grid defection of small and medium sized enterprises using solar photovoltaic, battery and generator hybrid systems, Trevor B. Peffley and Joshua M. Pearce
Low-cost open source ultrasound-sensing based navigational support for the visually impaired, Aliaksei Petsiuk and Joshua M. Pearce
Open Source Waste Plastic Granulator, Arvind Ravindran, Sean Scsavnicki, Walker Nelson, Peter Gorecki, Jacob Franz, Shane Oberloier, Theresa K. Meyer, Andrew Barnard, and Joshua M. Pearce
Mechanical properties and applications of recycled polycarbonate particle material extrusion-based additive manufacturing, Matthew J. Reich, Aubrey Woern, Nagendra Gautam Tanikella, and Joshua M. Pearce
Differences in Snow Shedding in Photovoltaic Systems with Framed and Frameless Modules, Daniel Riley, Laurie Burnham, Bevan Walker, and Joshua M. Pearce
Scalable honeycomb top contact to increase the light absorption and reduce the series resistance of thin film solar cells, Mehdi Sadatgol, Nupur Bihari, Joshua M. Pearce, and Durdo O. Guney
ICME applied in the undergraduate capstone senior design sequence, Paul G. Sanders
Open-source three-dimensional printable infant clubfoot brace, Benjamin L. Savonen, Jennifer Bow, and Joshua M. Pearce
Bridging the social and environmental dimensions of global sustainability in STEM education with additive manufacturing, Chelsea Schelly and Joshua M. Pearce
Dual morphology titanium dioxide for dye sensitized solar cells, R. Selvapriya, J. Mayandi, V. Ragavendran, V. Sasirekha, J. Vinodhini, and Joshua M. Pearce
Systems analysis for PET and olefin polymers in a circular economy, David R. Shonnard, Emily Tipaldo, Vicki Thompson, Joshua M. Pearce, Gerard T. Caneba, and Robert Handler
Analysis of local grain boundary strengthening utilizing the extrinsic indentation size effect, Prasad Pramod Soman, Erik G. Herbert, Katerina E. Aifantis, and Stephan A. Hackney
Analysis of local grain boundary strengthening utilizing the extrinsic indentation size effect, Prasad Pramod Soman, Erik G. Herbert, Katerina E. Aifantis, and Stephen Hackney
Open source completely 3-D printable centrifuge, Salil S. Sule, Aliaksei Petsiuk, and Joshua M. Pearce
Photo-assisted methanol steam reforming on solid solution of Cu-Zn-Ti oxide, Zhuxing Sun, Siyuan Fang, Yan Lin, and Yun Hang Hu
Novel binder-free three-dimensional MoS2-based electrode for efficient and stable electrocatalytic hydrogen evolution, Zhuxing Sun, Mengfei Yang, Yiwen Wang, and Yun Hang Hu
Rapid flocculation-sedimentation of microalgae with organosilane-functionalized halloysite, Daoyong Tan, Haiyang Zhang, Shiyong Sun, Faqin Dong, Hongjuan Sun, and Bowen Li
Alumina-enhanced valorization of ferronickel slag into refractory materials under microwave irradiation, Huiming Tang, Zhiwei Peng, Foquan Gu, Lei Ye, Jiann-Yang Hwang, and Mingjun Rao
Influence of surface etching and oxidation on the morphological growth of Al2O3 by ALD, Mikhail Trought, Isobel Wentworth, Chathura de Alwis, Timothy Leftwich, and Kathryn Perrine
Influence of metal assisted chemical etching time period on mesoporous structure in as-cut upgraded metallurgical grade silicon for solar cell application, Ragavendran Venkatesan, Jeyanthinath Mayandi, Joshua M. Pearce, and Vishnukanthan Venkatachalapathy
Effect of microwave power irradiation on TiO2 nano-structures and binder free paste screen printed dye sensitized solar cells, J. Vinodhini, J. Vinodhini, J. Mayandi, R. Atchudan, P. Jayabal, V. Sasirekha, and Joshua M. Pearce
Highly selective production of C5-C12 hydrocarbons over efficient Ru/heteropoly-acid catalysts, Chunling Wang, Jiong Yang, Yongxing Sun, Qian Li, Ying Zheng, and Yun Hang Hu
Surface modification of LiNi0.5Co0.2Mn0.3O2 cathode materials with Li2O‐B2O3‐LiBr for lithium‐ion batteries, Lei Wang and Yun Hang Hu
Applications of 3D potassium-ion pre-intercalated graphene for perovskite and dye-sensitized solar cells, Wei Wei, Meijia Li, and Yun Hang Hu
Lithium-chemical synthesis of highly conductive 3D mesoporous graphene for highly efficient new generation solar cells, Wei Wei, Dario Stacchiola, Nusnin Akter, J. Anibal Boscoboinik, and Yun Hang Hu
Effect of Mg content on Al3Sc-dispersoid formation in cast billets of Al-Mg-Sc alloys, Carson Williams, Thomas D. Wood, Paul G. Sanders, and Timothy Langan
Thermo–Photo Catalysis for Methanol Synthesis from Syngas, Xuechen Wu, Junyu Lang, Yueyue Jiang, Yan Lin, and Yun Hang Hu
Novel SW2-based 3D electrode with protecting scaffold for efficient and stable hydrogen evolution, Mengfei Yang, Zhuxing Sun, and Yun Hang Hu
Structural alteration of montmorillonite by acid activation and its effect on the decolorization of rapeseed oil, Mengna Yang, Hongjuan Sun, Tongjiang Peng, Bowen Li, and Yanyan Xie
Precipitation hardening via chemically ordered L12 precipitates in Al-Sc-Zr Alloys - New insights using combined STEM and EDS study, Yang Yang, Amlan Mukherjee, and Paul G. Sanders
Precipitation hardening of supersaturated Al–Sc–Zr produced via melt-spinning, Yang Yang and Paul G. Sanders
Reverse flotation separation of hematite from quartz assisted with magnetic seeding aggregation, Wanzhong Yin, Donghui Wang, Jaroslaw Drelich, Bin Yang, Dong Li, Zhanglei Zhu, and Jin Yao
Co(II) triggered radical reaction between SO2 and o-phenylenediamine for highly selective visual colorimetric detection of SO2 gas and its derivatives, Haili Yu, Faqin Dong, Bowen Li, and Frank S. Riehle
Mo6S8-based single-metal-atom catalysts for direct methane to methanol conversion, Hao-Tian Zhang, Cheng Liu, Ping Liu, and Yun Hang Hu
Urban mining: Characterization and recycling of solid wastes, Mingming Zhang and Bowen Li
Preparation of pyrolytic carbon from waste tires for methylene blue adsorption, Yuzhe Zhang, Qian Cheng, Dandan Wang, Da Xia, Xudong Zheng, Zhongyu Li, and Jiann-Yang Hwang
Enhanced Photocatalytic Production of H2O2 by Nafion Coatings on S,N-Codoped Graphene-Quantum-Dots-Modified TiO2, Longhui Zheng, Jingzhen Zhang, Yun Hang Hu, and Mingce Long
Surface interaction between metazeunerite and an indigenous microorganism Kocuria rosea: Implications for bioremediation of As-U tailings, Lei Zhou, Faqin Dong, Hailong Li, Tingting Huo, Pingping Wang, Mingxue Liu, Gang Yang, Wei Zhang, Wenyuan Hu, Xiaoqin Nie, Huichao He, Bowen Li, and Ray L. Frost
Photocatalytic conversion of ethane: status and perspective, Yao Zhu, Shangli Shi, Chunling Wang, and Yun Hang Hu
Submissions from 2018
Open-source parametric 3-D printed slot die system for thin film semiconductor processing, L. Y. Beeker, Adam Pringle, and Joshua M. Pearce
3-D printable open source dual axis gimbal system for optoelectronic measurements, Nupur Bihari, Smruti P. Dash, Karankumar C. Dhankani, and Joshua M. Pearce
Decarbonizing the boardroom? Aligning electric utility executive compensation with climate change incentives, Cleyton Cavallaro, Joshua M. Pearce, and Roman Sidortsov
Highly conductive porous Na-embedded carbon nanowalls for high-performance capacitive deionization, Liang Chang and Yun Hang Hu