Explore a selection of works produced by faculty in the Department of Materials Science and Engineering at Michigan Technological University.

Follow

Works from 1998

Link

Preparation of spherical toner particles for atomic force microscopic studies of colloidal forces, J. Drelich, J. Nalaskowski, and J. D. Miller

Link

Selective froth flotation of PVC from PVC/PET mixtures for the plastics recycling industry, J. Drelich, T. Payne, J. H. Kim, J. D. Miller, R. Kobler, and S. Christiansen

Link

Structural Features of Low-Temperature LiCoO < inf> 2 and Acid-Delithiated Products, Y. Shao-Horn, S. A. Hackney, C. S. Johnson, A. J. Kahaian, and M. M. Thackeray

Works from 1996

Link

Cracks in gradient elastic bodies with surface energy, G. Exadaktylos, I. Vardoulakis, and E. C. Aifantis

Link

Screw dislocation near a triple junction of phases with different elastic moduli: I. General solution, M. Yu Gutkin, A. E. Romanov, and E. C. Aifantis

Link

Some consequences of thermosolutal convection: The grain structure of castings, G. Hansen, A. Hellawell, S. Z. Lu, and R. S. Steube

Link

A study on coherency strain and precipitate morphology via a discrete atom method, Jong K. Lee

Works from 1995

Link

Disciplinary Patterns in Degrees, Faculty and Research Funding, Richard W. Heckel

Link

The asymptotic solution of gradient elasticity for mode III, David J. Unger and Elias C. Aifantis

Link

Stand‐off positions and nonuniform distributions of misfit dislocations in heterophase systems, M. Yu. Gutkin, A. E. Romanov, and E. C. Aifantis

Works from 1994

Link

On the stand‐off positions of misfit dislocations, M. Yu Gutkin and A. E. Romanov

Link

Current and Emerging Statistical Trends in Engineering Education, Richard W. Heckel

Link

Modeling of mechanical alloying: Part I. deformation, coalescence, bdand fragmentation mechanisms, D. Maurice and T. H. Courtney

Works from 1993

Link

Modeling of particle size evolution during mechanical milling, B. J.M. Aikin and T. H. Courtney

Link

The effects of fuel sulfur concentration on regulated and unregulated heavy-duty diesel emissions, Cornelius N. Opris, Linda D. Gratz, Susan T. Bagley, Kirby J. Baumgard, David G. Leddy, and John H. Johnson

Link

Effect of plasma spray processing variations on particle melting and splat spreading of hydroxylapatite and alumina, S. J. Yankee and B. J. Pletka

Works from 1991

Link

Fracture strength of low-pressure injection-moulded reaction-bonded silicon nitride, S. J. Kwak, E. Krug, and S. C. Danforth

Works from 1990

Link

Elastic strain energy of deformation twinning in tetragonal crystals, J. K. Lee and M. H. Yoo

Works from 1989

Link

The growth of tubular or vermicular structures in organic monotectic systems, Hui Song and Angus Hellawell

Works from 1988

Link

Porosity and tensile ductility in Al-Zn alloys, B. Harriprashad, T. H. Courtney, and J. K. Lee

Link

Channel formation in Pb-Sn, Pb-Sb, and Pb-Sn-Sb alloy ingots and comparison with the system NH < inf> 4 CI-H < inf> 2 O, J. R. Sarazin and A. Hellawell

Works from 1987

Link

Interparticle spacings and undercoolings in Al-Si eutectic microstructures, L. M. Hogan and H. Song

Link

The mechanism of silicon modification in aluminum-silicon alloys: Impurity induced twinning, Shu Zu Lu and A. Hellawell

Link

Interdiffusion in Ni-Rich, Ni-Cr-Al alloys at 1100 and 1200 °C: Part I. Diffusion paths and microstructures, J. A. Nesbitt and R. W. Heckel

Link

Predicting diffusion paths and interface motion in γ/γ + β, Ni-Cr-Al diffusion couples, J. A. Nesbitt and R. W. Heckel

Link

Interdiffusion in Ni-rich, Ni-Cr-Al alloys at 1100 and 1200 °C: Part II. Diffusion coefficients and predicted concentration profiles, J. A. Nesbitts and R. W. Heckel

Works from 1986

Link

The effects of tantalum on the microstructure of two polycrystalline nickel-base superalloys: B-1900 + Hf and MAR-M247, G. M. Janowski, R. W. Heckel, and B. J. Pletka

Works from 1984

Link

Deformation and fracture at isolated holes in plane-strain tension, R. J. Bourcier, R. E. Smelser, O. Richmond, and D. A. Koss

Link

SOLIDIFICATION OF MONOTECTIC ALLOYS - MICROSTRUCTURES AND PHASE SPACINGS., R. N. Grugel, T. A. Lograsso, and A. Hellawell

Works from 1982

Link

Enhancement of coupled growth of off-eutectic alloys by "stop-and-go" technique, S. S. Frydman and T. H. Courtney

Link

The Influence of Grain Boundary Phosphorus Concentration on Liquid Metal and Hydrogen Embrittlement of Monel 400, A. W. Funkenbusch, L. A. Heldt, and D. F. Stein

Link

The occurrence of aligned microstructures in directionally solidified aluminum-bismuth alloys, R. N. Grugel and A. Hellawell

Link

An integral equation approach to the elastic interaction of two precipitates, W. C. Johnson and J. K. Lee

Link

Fracture in Equiaxed Two Phase Alloys: Part I. Fracture in Alloys with Isolated Elastic Particles, M. A. Przystupa and T. H. Courtney

Link

Fracture in equiaxed two phase alloys: part ii. fracture in alloys with isolated plastic particles, M. A. Przystupa and T. H. Courtney

Works from 1981

Link

Alloy solidification in systems containing a liquid miscibility gap, Richard N. Grugel and Angus Hella Well

Works from 1978

Link

Precipitation at interphase boundaries, H. I. Aaronson, M. R. Plichta, G. W. Franti, and K. C. Russell

Link

Generalization of the nucleus shape-dependent parameters in the nucleation rate equation, Kwai S. Chan, J. K. Lee, G. J. Shiflet, K. C. Russell, and H. I. Aaronson

Link

Calculation of the elastic strain field of a cuboidal precipitate in an anisotropic matrix, Jong K. Lee and William C. Johnson

Link

A re-examination of the thermodynamics of the proeutectoid ferrite transformation in Fe-C alloys, G. J. Shiflet, J. R. Bradley, and H. I. Aaronson

Link

On the origin of microcracking behind a crack tip, M. G. Stout and D. A. Koss

Works from 1977

Link

Flow boiling and pool boiling critical heat flux in water and ethylene glycol mixtures, W. J. Frea, R. Knapp, and T. D. Taggart

Works from 1976

Link

The effect of fe additions on the embrittlement of Cu-Bi alloys, W. C. Johnson, A. Joshi, and D. F. Stein

Link

A critical test of two theories of non-IPS geometric surface relief effects associated with diffusional phase transformations, K. R. Kinsman and H. I. Aaronson

Link

The kinetics of coarsening in the Al-Al < inf> 3 Ni System, H. B. Smartt and T. H. Courtney

Works from 1975

Link

Decomposition in Al-Zn alloys: Part I. Isothermal decomposition in an Al-22 at. pct Zn-0.1 at. pct Mg alloy, Terry L. Bartel and Karl B. Rundman

Link

Coarsening of eutectic fiber composites during cooling from the eutectic temperature, G. Garmong and T. H. Courtney

Link

Coarsening of eutectic fiber composites during cooling from the eutectic temperature, G. Garmong and T. H. Courtney

Link

Decomposition in Al-Zn alloys: Part II. Decomposition during continuous cooling, Dennis T. Lewandowski and Karl B. Rundman

Link

Considerations on the Kaufman approach to binary phase diagram calculation, K. F. Michaels, W. F. Lange, J. R. Bradley, and H. I. Aaronson

Link

Asymmetrical mechanical behavior of a precipitation hardened beta titanium alloy, Steven M. Tuominen and Donald A. Koss

Works from 1974

Link

A study of grain boundary segregants in thermally embrittled maraging steel, W. C. Johnson and D. F. Stein

Works from 1973

Link

Discussion of "The migrational characteristics of the cusp-oriented α/k interface in the Cu-Si system", K. R. Kinsman, E. Eichen, and H. I. Aaronson

Link

Effect of composition and deformation temperature on the annealing behavior of stacking faults in α-Cu-Ge alloys, J. W. Kirby, D. J. Borich, and D. E. Mikkola

Link

Lengthening kinetics of ferrite and bainite sideplates, E. P. Simonen, H. I. Aaronson, and R. Trivedi

Link

Solid Solution strengthening of high purity niobium alloys, J. R. Slining and D. A. Koss

Link

The eutectoid region of the ti-pd system, J. C. Williams, H. I. Aaronson, and B. S. Hickman

Works from 1972

Link

A debate on the bainite reaction, R. F. Hehemann, K. R. Kinsman, and H. I. Aaronson