Document Type
Article
Publication Date
10-1-2020
Department
Department of Materials Science and Engineering; Department of Electrical and Computer Engineering
Abstract
Low-cost high-resolution metal 3-D printing remains elusive for the scientific community. Low-cost gas metal arc wire (GMAW)-based 3-D printing enables wire arc additive manufacturing (WAAM) for near net shape applications, but has limited resolution due to the complexities of the arcing process. To begin to monitor and thus control these complexities, the initial designs of the open source GMAW 3-D printer have evolved to include current and voltage monitoring. Building on this prior work, in this study, the design, fabrication and use of the open source arc analyzer is described. The arc analyzer is a multi-sensor monitoring system for quantifying the processing during WAAM, which includes voltage, current, sound, light intensity, radio frequency, and temperature data outputs. The open source arc analyzer is tested here on aluminum WAAM by varying wire feed rate and measuring the resultant changes in the sensor data. Visual inspection and microstructural analysis of the printed samples looking for the presence of porosity are used as the physical indicators of quality. The value of the sensors was assessed and the most impactful sensors were found to be the light and radio frequency sensors, which showed arc extinction events and a characteristic “good weld” peak frequency.
Publication Title
HardwareX
Recommended Citation
Pringle, A.,
Oberloier, S.,
Petsiuk, A.,
Sanders, P. G.,
&
Pearce, J. M.
(2020).
Open source arc analyzer: Multi-sensor monitoring of wire arc additive manufacturing.
HardwareX,
8.
http://doi.org/10.1016/j.ohx.2020.e00137
Retrieved from: https://digitalcommons.mtu.edu/michigantech-p/14307
Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.
Version
Publisher's PDF
Publisher's Statement
© 2020 The Author(s). Published by Elsevier Ltd. Publisher’s version of record: https://doi.org/10.1016/j.ohx.2020.e00137