Works from 1977
Stiffness of machine tool joints. A random process approach, S. M. Pandit
Stochastic linearization by data dependent systems, S. M. Pandit
Modeling and Analysis of Closed-Loop Systems from Operating Data, S. M. Pandit and S. M. Wu
Psilocin analogs. 1. Synthesis of 3‐[2‐(dialkylamino)ethyl] ‐and 3‐[2‐(cycloalkylamino)ethyl] indol‐4‐ols, David B. Repke, Wilfred J. Ferguson, and Dallas K. Bates
A TEM investigation of hydrogen-induced deformation twinning and associated martensitic phases in 304-type stainless steel, J. M. Rigsbee and R. B. Benson
Scavenging of volcanic aerosol by ash: Atmospheric and volcanologic implications, William I. Rose
Strain energy interactions, the To concept and sympathetic nucleation, K. C. Russell, D. M. Barnett, C. J. Altstetter, H. I. Aaronson, and J. K. Lee
Kinetics of the approach to equilibrium shape of a disc-shaped precipitate, G. J. Shiflet, H. I. Aaronson, and T. H. Courtney
Homogeneous nucleation kinetics of parallelepipeds, G. J. Shiflet, K. C. Russell, and H. I. Aaronson
Microcomputer Education in the United States, Martha E. Sloan
Evaluation of the Model Curriculum in Computer Science and Engineering, M. E. Sloan
Two-dimensional effects on heat transfer rates from an array of straight fins, N. V. Suryanarayana
Strengthening of copper by dislocation substructures, W. G. Truckner and D. E. Mikkola
The influence of Si on precipitation phenomena and age hardening of a beta Ti alloy, S. M. Tuominen, G. W. Franti, and D. A. Koss
REUSABLE ANGLE TRANSDUCER, G. L. Viegelahn
On wedge indentation and its relationship with incipient plastic deformation in metal cutting, K. J. Weinmann
Review of materials processing literature 1973-1975 german language literature Part 1: Metal forming, K. J. Weinmann
Review of materials processing literature 1973-1975 german language literature Part 2: Metal removal, K. J. Weinmann
On the upper limit to equilibrium segragation at a grain boundary, C. L. White and D. F. Stein
The Cyclic Stress-Strain response of Ti 6Al 4V, C. C. Wojcik and D. A. Koss
Advice on Project Seafarer [1], Donald G. Yerg
Works from 1976
The Proeutectoid Reactions in Steel, H. I. Aaronson
Examination of a Mechanism for the Nucleation by Shear of Grain Boundary Allotriomorphs, Hubert I. Aaronson, D. W. Dooley, and K. C. Russell
Solvent extraction of uranium from dilute solutions using a gas-bubble mixed extraction column, R. J. Andreini, G. W. Lower, and T. J. DeMull
Preparation of Oriented Molybdenum Twist Boundaries by Electron-Beam Zone Melting, S. P. Clough, S. J. Vonk, and D. F. Stein
The use of indicator species to classify climax sugar maple and eastern hemlock forests in Upper Michigan, Michael S. Coffman and Gary L. Willis
Dimethylacetamide Solvates of Alkali Metal Salts, Kenneth S. Dahl and Dean C. Luehrs
Magnetoelastic buckling: Theory vs. experiment - Paper presents an investigation of the conditions which must be satisfied in an experimental program in order to check theoretical predictions of magnetoelastic buckling fields, J. M. Dalrymple, M. O. Peach, and G. L. Viegelahn
Two crystalline pentofuranosyl bromides: tri-O-(p-nitrobenzoyl)-β-D-ribofuranosyl bromide and tri-O-(p-nitrobenzoyl)-α,β-D-xylofuranosyl bromide, Hassan S. El Khadem, Takur D. Audichya, David A. Niemeyer, and John Kloss
A circular dichroism rule for glycosyl-pyrimidines and -purines, Hassan S. El Khadem, George P. Kreishman, David L. Swartz, and Saad H. El Khadem
Mono- and bis-hydrazone of D-erythrose and 2,3-Dioxo-y-butyrolactone, Hassan S. El Khadem, Zaki El Shafel, El Sayed El, and Mohamed El Sadek
Timing of late Tertiary deformation in the Andes of Peru, Edward Farrar and Donald C. Noble
Timing of late Tertiary deformation in the Andes of Peru, Edward Farrar and Donald C. Noble
Guest editorial, D. P. Garb and H. M. Paynter
Three identities between stirling numbers and the stabilizing character sequence, Michael Gilpin
The effect of fe additions on the embrittlement of Cu-Bi alloys, W. C. Johnson, A. Joshi, and D. F. Stein
Part 4: Review of japanese language literature, 1972, C. H. Kahng
A critical test of two theories of non-IPS geometric surface relief effects associated with diffusional phase transformations, K. R. Kinsman and H. I. Aaronson
Flow stress asymmetry and cyclic stress-strain response in a BCC Ti-V alloy, Donald A. Koss and C. Craig Wojcik
pKa of Azatriptycene, Dennis J. Kreil and Vernon R. Sandel
The Salt-Induced Destacking of Purine in Aqueous NaCl Systems and Its Implications on Life at Elevated Temperatures, George P. Kreishman, David A. Foss, Kimio Inoue, and Leslie Leifer
On the kröner approach to the strain energy of an incoherent spherical precipitate, Jong K. Lee
Normal Vibration Frequencies of a Rectangular Two-Dimensional Array of Identical Point-Masses, S. M. Lee
Normal vibration frequencies of two- and three-dimensional arrays of alternating point masses, S. M. Lee
The thermal stability of the fibrous copper-chromium eutectic, L. Y. Lin, T. H. Courtney, J. P. Stark, and K. M. Ralls
Teaching good programming techniques, J. L. Lowther and Z. C. Motteler
Pulse Duration Effects in the Shock Hardening of Cu 8.7Ge, E. T. Marsh and Donald E. Mikkola
Application of heterogeneous nucleation theory to precipitate nucleation at GP zones, P. E. Marth, H. I. Aaronson, G. W. Lorimer, T. L. Bartel, and K. C. Russell
Elemental and isotopic geochemistry of nonhydrated quartz latite glasses from the Eureka Valley Tuff, east-central California, Donald C. Noble, Marjorie K. Korringa, S. E. Church, Harry R. Bowman, Miles L. Silberman, and C. E. Heropoulos
Stress corrosion cracking of alpha brass in a nontarnishing ammoniacal environment:fractography and chemical analysis, T. R. Pinchback, S. P. Clough, and L. A. Heldt
Chemical Polishing of Steel for Optical Microscopy, Mark R. Plichta, Hubert I. Aaronson, and Walter F. Lange
Nucleation Kinetics of the Massive Transformation in Cu Zn in the Presence and Absence of Special Orientation Relationships, Mark R. Plichta, J. M. Rigsbee, M. G. Hall, K. C. Russell, and Hubert I. Aaronson
Influence of Solution Annealing Temperature upon Precipitate Nucleation Kinetics at Grain Boundaries, K. C. Russell and Hubert I. Aaronson
The kinetics of coarsening in the Al-Al3Ni System, H. B. Smartt and T. H. Courtney
The Structure of the Spring Thermal Bar in Lake Superior, II, J. D. Spain, G. M. Wernert, and D. W. Hubbard
The effect of receiver pressure on the observed flow pattern in the hydrostatic extrusion of bimetal rods, J. M. Story, B. Avitzur, and W. C. Hahn
Substituent effects on the rate of decay of p-benzosemiquinone anion radicals, Alfred B. Sullivan and G. Fredric Reynolds
Transient response of straight fins part ii, N. V. Suryanarayana
Influence of interfacial diffusion upon nucleation kinetics at grain and interphase boundaries, G. Vander Velde, J. A. Velasco, K. C. Russell, and H. I. Aaronson
The measurement and analysis of the physical character of diesel particulate emissions, Carl T. Vuk, Martin A. Jones, and John H. Johnson
Part 3: Review of german language literature, K. J. Weinmann
Review of materials processing literature 1971-72, K. J. Weinmann
Resistance strain gages as physiological transducers on trees - Foil strain gages are bonded directly to the bark of a living tree to measure its relative physiological changes by monitoring changes in the circumference of the stem, R. L. Whipple, J. B. Ligon, C. P. Burger, and M. S. Coffman
Cavitation-Induced Erosion of Ordered and Disordered Cu3 Au, R. N. Wright and D. E. Mikkola
Works from 1975
Microstructure-A prologue, Hubert I. Aaronson
The Watson-McDougall Shear: Proof that Widmanstatten Ferrite Cannot Grow Martensitically, Hubert I. Aaronson, M. G. Hall, D. M. Barnett, and K. R. Kinsman
On Work and Authority: Issues in Job Enlargement, Job Enrichment, Worker Participation and Shared Authority, Kenneth O. Alexander
Chloropalladation of 2‐phenyl‐1,2,3‐triazoles as a means of selective o‐chlorination, J. A.C. Allison, H. S. El Khadem, and C. A. Wilson
Elastic constants of tungsten-rhenium alloys from 77 to 298°K, R. A. Ayres, G. W. Shannette, and D. F. Stein
Decomposition in Al-Zn alloys: Part I. Isothermal decomposition in an Al-22 at. pct Zn-0.1 at. pct Mg alloy, Terry L. Bartel and Karl B. Rundman
A study of sulfur embrittled oxygen free copper, Stephen P. Clough and Dale F. Stein
Identification of atomic boron in steel by auger electron spectroscopy, A. P. Coldren, A. Joshi, and D. F. Stein
Fault Migration vs. Two-Dimensional Ostwald Ripening as a Mechanism for Coarsening of Rod Eutectics, Thomas H. Courtney
Preparation of a substituted 3-acetamido-3-deoxy-D-ribofuranosyl bromide suitable for the synthesis of puromycin analogs, Hassan S. El Khadem, Thakur D. Audichya, El Sayed H. El Ashry, and Ronald Sindric
Mass spectra of substituted pyrazolo[1,5‐a]‐1,3,5‐triazines, Hassan S. El Khadem, Rodger L. Foltz, Thomas Novinson, and Keitaro Senga
Mass spectra of styrylpyridinecarboxylates, H. S. El Khadem, L. Rateb, and H. Mokhtar
Comparative hypoxic tolerance in the Sciuridae, R. J. Faleschini and B. K. Whitten
Influence of calcium on the fracture strength of polycrystalline alumina, A. W. Funkenbusch and D. W. Smith
Coarsening of eutectic fiber composites during cooling from the eutectic temperature, G. Garmong and T. H. Courtney
Coarsening of eutectic fiber composites during cooling from the eutectic temperature, G. Garmong and T. H. Courtney
Products of Symmetric Forms, Michael Gilpin
Instability analysis of thin rectangular plates using the kantorovich method, T. R. Grimm and J. C. Gerdeen
Considerations on a Martensitic Mechanism for the F.C.C.→B.C.C. Transformation in a Cu-0.33 w/o Cr alloy, M. G. Hall, Hubert I. Aaronson, and G. W. Lorimer
Synthesis of 8-(3′-Deoxy-α-D-threo-pentofuranosyl)adenine and 9-(3′-Deoxy-α-D-threo-pentofuranosyl)adenine, S. Hassan, El Khadem, and Thakur D. Audichya
Double Dielectric Relaxation of Non-Confocal Membrane-Covered Ellipsoidal Particle Suspensions, Hideo Ichimura, David Feinstein, and Richard F. Schwartz
Additive and Impurity Distributions at Grain Boundaries in Sintered Alumina, W. C. JOHNSON and D. F. STEIN
Influence of crystallography on aspects of solid-solid nucleation theory, W. C. Johnson, C. L. White, P. E. Marth, P. K. Ruf, S. M. Tuominen, K. D. Wade, K. C. Russell, and H. I. Aaronson
Influence of crystallography on aspects of solid-solid nucleation theory, W. C. Johnson, C. L. White, P. E. Marth, P. K. Ruf, S. M. Tuominen, K. D. Wade, K. C. Russell, and H. I. Aaronson
Role of Mn and Si in temper embrittlement of low alloy steels, A. Joshi, P. W. Palmberg, and D. F. Stein
Chemistry and mineralogy of Precambrian paleosols in northern Michigan, J. Kalliokoski
C. Harry Benedict centennial, David H. Kenny
Chelation and the Nucleophilicity of α-Ketoaldehyde and α-Diketone Monophenylhydrazones, H. S.E.L. Khadem, G. P. Kreishman, and E. H.E.L. Ashry
The design of a 4 wheel steer-4 wheel hydrostatic drive all-terrain vehicle for REV-74, Fredric L. Kinney, Joseph C. Harp, and John H. Johnson
Thickening kinetics of proeutectoid ferrite plates in Fe-C alloys, K. R. Kinsman, E. Eichen, and H. I. Aaronson
Thickening kinetics of proeutectoid ferrite plates in Fe-C alloys, K. R. Kinsman, E. Eichen, and H. I. Aaronson
The Thermally Activated Solid-Solution Hardening of the Ternary System: Niobium-Molybdenum-Tungsten, Donald Koss and John Hack
Predators and Prey, Kenneth R. Kramm
Circadian activity of the red squirrel, Tamiasciurus hudsonicus, in continuous darkness and continuous illumination, K. R. Kramm
Homogenization of compacted blends of Ni and Mo powders, R. D. Lanam, F. C.H. Yeh, J. E. Rovsek, D. W. Smith, and R. W. Heckel
Homogenization of compacted blends of Ni and Mo powders, R. D. Lanam, F. C.H. Yeh, J. E. Rovsek, D. W. Smith, and R. W. Heckel