Works from 1999
The role of empirical studies in process improvement, L. M. Ott, A. Kinnula, C. Seaman, and C. Wohlin
A landscape level comparison of pre-European settlement and current soil carbon content of a forested landscape in upper Michigan, Karen E. Owens, David D. Reed, Andrew J. Londo, Ann Maclean, and Glenn D. Mroz
High frequency fatigue crack propagation behavior of a nickel-base turbine disk alloy, S. A. Padula, A. Shyam, R. O. Ritchie, and Walter Milligan
Atomistic simulation study of spinel oxides: Zinc aluminate and zinc gallate, Ravindra Pandey, Julian D. Gale, Suresh K. Sampath, and Jose M. Recio
First-principles study of stability, band structure, and optical properties of the ordered Ge < inf> 0.50 Sn < inf> 0.50 alloy, Ravindra Pandey, Michel Rérat, and Mauro Causà
Data-dependent systems profilometry of two-dimensional surfaces, Sudhakar M. Pandit and Duen Ping Chan
Erratum: Analysis of air quality data using positive matrix factorization (Environmental Science and Technology (1999) 33 (635-641)), K. G. Paterson and W. H. Glaze
Student perceptions of internet-based learning tools in environmental engineering education, Kurtis G. Paterson
Analysis of air quality data using positive matrix factorization, Kurtis G. Paterson, Jessica L. Sagady, Dianne L. Hooper, Steve B. Bertman, Mary Anne Carroll, and Paul B. Shepson
Counter-trends and potential trend conversions in the early twenty-first century, Karol I. Pelc
Application of a reynolds-stress turbulence model to gas turbine combustor calculations, P. F. Penko, K. P. Kundu, and S. L. Yang
Generalizations of the Greenberg-Rascle construction of periodic solutions to quasilinear equations of 1-D elasticity, Robert Peszek
NO < inf> x and NO < inf> y over the northwestern North Atlantic: Measurements and measurement accuracy, Matthew C. Peterson and Richard E. Honrath
Wolf-moose interaction on Isle Royale: The end of natural regulation, Rolf O. Peterson
Ecosystem consequences of wolf behavioral response to climate, Eric Post, Rolf O. Peterson, Nils Chr Stenseth, and Brian E. McLaren
The role of flank face interference in improving the accuracy of dynamic force predictions in peripheral milling, S. Ranganath, K. Narayanan, and J. W. Sutherland
Measurement of dynamic properties of automotive shock absorbers for NVH, Mohan D. Rao, Scott Gruenberg, and Homa Torab
Molecular Structure Disassembly Program (MOSDAP): A chemical information model to automate structure-based physical property estimation, John W. Raymond and Tony N. Rogers
Laser guidance and trapping of mesoscale particles in hollow-core optical fibers, Michael J. Renn, Robert Pastel, and Heather J. Lewandowski
STS at Michigan Technological University: A history and profile, Terry S. Reynolds
Chiroptical Spectroscopy, Emission Theory, James P. Riehl
Thresholds for High-cycle Fatigue in a Turbine Engine Ti-6Al-4V Alloy, R. O. Ritchie, B. L. Boyce, J. P. Campbell, O. Roder, A. W. Thompson, and Walter Milligan
The isolation and characterization of right-side-out plasma membrane vesicles from barley aleurone cells, Kim M. Robbins, Narasimhan Bhuvarahamurthy, Gay Pliska-Matyshak, and Pushpalatha P.N. Murthy
Modeling molybdenum carbide-based hydrodesulfurization (HDS) catalysts using carbon-modified Mo(110) surfaces, Charles L. Roe and Kirk H. Schulz
Micro-electro-mechanical deformable mirrors for aberration control in optical systems, Michael C. Roggemann, Victor M. Bright, Byron M. Welsh, William D. Cowan, and Max Lee
Joint processing of Hartmann sensor and conventional image measurements to estimate large aberrations: Theory and experimental results, Michael C. Roggemann, Timothy J. Schulz, Chee W. Ngai, and Jason T. Kraft
Monitoring end-mill wear and predicting tool failure using accelerometers, J. T. Roth and S. M. Pandit
Fastener design for transversely loaded composite plates, D. M. Running, J. B. Ligon, and I. Miskioglu
Inverse kinematic modeling of a coupled flexure hinge mechanism, Jae W. Ryu, Sung Q. Lee, Dae Gab Gweon, and Kee S. Moon
Electronic structure of spinel oxides: Zinc aluminate and zinc gallate, Suresh K. Sampath, D. G. Kanhere, and Ravindra Pandey
Modeling temperature gradients across edges over time in a managed landscape, Sari C. Saunders, Jiquan Chen, Thomas D. Drummer, and Thomas R. Crow
Pressure-swirl atomization in the near field, David P. Schmidt, Idriss Nouar, P. K. Senecal, C. J. Rutland, J. K. Martin, R. D. Reitz, and Jeffrey A. Hoffman
Emissions from a diesel vehicle operated on alternative fuels in Copenhagen, J. Schramm, I. Foldager, N. Olsen, and L. Gratz
The other re-engineering of engineering education, 1900-1965, Bruce E. Seely
Hollywood’s transnational appeal: Hegemony and democratic potential?, M. Mehdi Semati and Patty J. Sotirin
Structural characterization of layered LiMnO < inf> 2 electrodes by electron diffraction and lattice imaging, Y. Shao-Horn, S. A. Hackney, A. R. Armstrong, P. G. Bruce, R. Gitzendanner, C. S. Johnson, and M. M. Thackeray
Structural fatigue in spinel electrodes in Li/Lix [Mn2]O4 cells, Y. Shao-Horn, S. A. Hackney, A. J. Kahaian, K. D. Kepler, E. Skinner, J. T. Vaughey, and M. M. Thackeray
Experimental determination of the thermal accommodation and condensation coefficients of water, Raymond A. Shaw and Dennis Lamb
The impact of metals on society part IX: United States, R. L. Smith
Threshold level as an index of squeak and rattle performance, David E. Soine, Harold A. Evensen, and Charles D. Vankarsen
Modeling surface texture in the peripheral milling process using neural network, spline, and fractal methods with evidence of chaos, G. A. Stark and K. S. Moon
Seasonal change in precipitation, snowpack, snowmelt, soil water and streamwater chemistry, northern Michigan, Robert Stottlemyer and David Toczydlowski
Fatigue crack propagation in aluminum nitride ceramics under cyclic compression, G. Subhash, S. M. Beesley, R. K. Govila, and W. Rafaniello
Dynamic indentation hardness and rate sensitivity in metals, G. Subhash, B. J. Koeppel, and A. Chandra
Back-trajectory analysis of atmospheric polychlorinated biphenyl concentrations over Lake Superior, S. Subhash, R. E. Honrath, and J. D.W. Kahl
Identification and dissociation in rhetorical exposé: An analysis of St. Irenaeus’Against Heresies, Dale Sullivan
Removal and destruction of organic contaminants in water using adsorption, steam regeneration, and photocatalytic oxidation: A pilot-scale study, Rominder P.S. Suri, Junbiao Liu, John C. Crittenden, and David W. Hand
Reconstructing Powder NQR Images with Real Gradient Coils, Srirama V. Swaminathan and B H. Suits
Stabilization of insertion electrodes for lithium batteries, M. M. Thackeray, C. S. Johnson, A. J. Kahaian, K. D. Kepler, J. T. Vaughey, Y. Shao-Horn, and S. A. Hackney
Addition of sulfur to organic matter during early diagenesis of lake sediments, N. R. Urban, K. Ernst, and S. Bernasconi
Development of a laboratory screening test for asphalt pavement crack sealants, Thomas J. Van Dam, Scott Reay, Marcy Appleyard, and Michael J. Eacker
Determination of the influence of wind on the Keweenaw Current in the Lake Superior basin as identified by Advanced Very High Resolution Radiometer (AVHRR) imagery, Diane M. Van Luven, Jacqueline E. Huntoon, and Ann L. Maclean
Automated soil particle-size analysis using X-ray absorption, Stanley J. Vitton, Nicole L. Ott, and Michael A. Lehman
Ecological interactions, social organization, and extinction risk in African wild dogs, John A. Vucetich and Scott Creel
Erosion of heterozygosity in fluctuating populations, John A. Vucetich and Thomas A. Waite
Cross-cultural Work Group, Christa Walck
Polymerization Control Through the Free-Radical Retrograde-Precipitation Polymerization Process, Bo Wang, Yadunandan Dar, Linhuo Shi, and Gerard T. Caneba
Vibrational and sound radiation properties of a double layered diesel engine gear cover, David A. Welsh and Harold A. Evensen
Value-bifurcation in bioscience: The rhetoric of research justification, Laurie Anne Whitt
Methanethiol adsorption on defective MoS < inf> 2 (0001) surfaces, Christopher G. Wiegenstein and Kirk H. Schulz
High cycle fatigue behaviour of Ti-47Al-2Cr-2Nb and Ti-6242S with (Al,Cr) < inf> 3 Ti plasma spray protective coating, T. D. Wood, D. K. Dewald, and D. E. Mikkola
Investigation of Readily Processable Thermoplastic-Toughened Thermosets. V. Epoxy Resin Toughened with Hyperbranched Polyester, H. Wu, J. Xu, Y. Liu, and P. Heiden
Morphological investigation of thermosets toughened with novel thermoplastics. I. Bismaleimide modified with hyperbranched polyester, J. Xu, H. Wu, O. P. Mills, and P. Heiden
Comparison of Hill's yield criteria in forming limit predictions, Siguang Xu and K. J. Weinmann
Consolidation and high strain rate mechanical behavior of nanocrystalline tantalum powder, Sang H. Yoo, T. S. Sudarshan, Krupa Sethuram, Ghatu Subhash, and R. J. Dowding
Dynamic compression behaviour of tungsten powders consolidated by plasma pressure compaction, S. H. Yoo, T. S. Sudarshan, K. Sethuram, G. Subhash, and R. J. Dowding
On the minimal weight of some singly-even codes, Vassil Y. Yorgov
Ab initio study of hydrogen adsorption on the ZnO (1010) surface, Peter Zapol, John B. Jaffe, and Anthony C. Hess
Density functional study of the structure, thermodynamics and electronic properties of CdGeAs < inf> 2 , Peter Zapol, Ravindra Pandey, Max Seel, J. Manuel Recio, and Melvin C. Ohmer
Formation of nanoscale trenches and wires as a pathway to phase-separation in strained epitaxial Ge-Sn alloys, J. Zhang, X. Deng, D. Swenson, S. A. Hackney, and M. Krishnamurthy
Catastrophic disturbance in the presettlement forests of the Upper Peninsula of Michigan, Quanfa Zhang, Kurt Pregitzer, and David D. Reed
Strength prediction of random fiber composite beams using a phenomenological-mechanistic model, Y. Zhang and D. L. Sikarskie
'Retrograde diagenesis' of clay minerals in the Precambrian Freda Sandstone, Wisconsin, Gengmei Zhao, Donald R. Peacor, and S. Douglas Mcdowell
Teaching surface design made easy, Yan Zhou, Yuan Zhao, John L. Lowther, and Ching Kuang Shene
Works from 1998
An analytical and experimental comparison of orthotropic sandwich panels using the Hydromat Test System, Pentti J. Ahtonen and David L. Sikarskie
Synthesis, NMR, relaxometry and circularly polarised luminescence studies of macrocyclic monoamidetris(phosphinate) complexes bearing a remote chiral centre, Silvio Aime, Mauro Botta, Rachel S. Dickins, Christine L. Maupin, David Parker, James P. Riehl, and J. A.Gareth Williams
Building a retargetable local instruction scheduler, Vicki Allan, Steven J. Beaty, Bogong Su, and Philip H. Sweany
On Mathieu's Inequality, Horst Alzer, J. L. Brenner, and O. G. Ruehr
A dynamic algorithm for integration in the boundary element method, Bruce A. Ammons and Madhukar Vable
An HR-method of mesh refinement for boundary element method, Bruce A. Ammons and Madhukar Vable
A framework for modeling the fate and transport of giardia and cryptosporidium in surface waters, Martin T. Auer, Susan T. Bagley, David A. Stern, and Mary J. Babiera
Development and parameterization of a kinetic framework for modeling light- and phosphorus- limited phytoplankton growth in cannonsville reservoir, Martin T. Auer and B. Forrer
Phosphorus bioavailability and p-cycling in cannonsville reservoir, Martin T. Auer, Katherine A. Tomasoski, Mary J. Babiera, Melanie L. Needham, Steven W. Effler, Emmet M. Owens, and Jeff M. Hansen
Relativistic many-body calculations for the oscillator strengths of the resonance lines of neon, argon, krypton, and xenon, Euripides N. Avgoustoglou and Donald R. Beck
Sources and fate of giardia cysts and cryptosporidium oocysts in surface waters, Susan T. Bagley, Martin T. Auer, David A. Stern, and Mary J. Babiera
Effects of an oxidation catalytic converter and a biodiesel fuel on the chemical, mutagenic, and particle size characteristics of emissions from a diesel engine, Susan T. Bagley, Linda D. Gratz, John H. Johnson, and Joseph F. McDonald
Novel etching and polishing techniques for Ni < inf> 3 Al crystals, G. K. Baranova, Yu L. Iunin, and E. M. Nadgorny
A sulfoxide-based ring annelation approach to fused, many-membered ring N,S-heterocycles, Dallas K. Bates and Mingde Xia
Chip morphology and hole surface texture in the drilling of cast Aluminum alloys, S. A. Batzer, D. M. Haan, P. D. Rao, W. W. Olson, and J. W. Sutherland
Hyperfine structure constants of (d+ s) < sup> 3 states in La I and the Zr II and Hf II isoelectronic sequences, Donald R. Beck
Theoretical lifetimes and Landé[Formula Presented] values of Cs II [Formula Presented] levels, Donald R. Beck
Configuration space for random walk dynamics, B. A. Berg and U. H.E Hansmann
A new multi-point active drawbead forming die: Model development for process optimization, Michael L. Bohn, Stefan U. Jurthe, and Klaus J. Weinmann
Lead isotope study of veins in the archean ishpeming greenstone belt, Michigan, Theodore J. Bornhorst, Ralph I. Thorpe, and Rodney C. Johnson
Optimization of adaptive-optics systems closedloop bandwidth settings to maximize imaging-system performance, Robert T. Brigantic, Michael C. Roggemann, Byron M. Welsh, and Kenneth W. Bauer
Holographic microscope for measuring displacements of vibrating microbeams using time-averaged, electro-optic holography, Gordon C. Brown and Ryszard J. Pryputniewicz
Characterization of Smith's nitrene and 1-phenyl-3-(α-cyano)benzylidenetriazene with theoretical, NMR, and flash photolytic methods, Richard E. Brown and G. David Mendenhall
Regeneration of northern red oak: Positive and negative effects of competitor removal, David S. Buckley, Terry L. Sharik, and J. G. Isebrands
Documenting complex surface temperature patterns from advanced very high resolution radiometer (AVHRR) imagery of Saginaw Bay, Lake Huron, Judith Wells Budd, W. Charles Kerfoot, and Ann L. Maclean
A model for predicting contaminant removal by adsorption within the international space station water processor: 1. Multicomponent equilibrium modeling, John L. Bulloch, David W. Hand, and John C. Crittenden