Works from 1999
Stand-level allometry in Pinus taeda as affected by irrigation and fertilization, J. S. King, T. J. Albaugh, H. L. Allen, and L. W. Kress
Electrically and thermally conductive nylon 6,6, Julia A. King, Kenneth W. Tucker, Bryan D. Vogt, Erik H. Weber, and Congling Quan
Characterization of alpha-pinene-degrading microorganisms and application to a bench-scale biofiltration system for VOC degradation, G. T. Kleinheinz, S. T. Bagley, W. P. St. John, J. R. Rughani, and G. D. McGinnis
Transformation mechanism for the pressure-induced phase transition in shocked cds, M. D. Knudson and Y. M. Gupta
Characteristics of Residual Plastic Zone under Static and Dynamic Vickers Indentations, B. J. Koeppel and G. Subhash
Influence of cold rolling and strain rate on plastic response of powder metallurgy and chemical vapor deposition rhenium, B. J. Koeppel and G. Subhash
Nearshore versus offshore copper loading in Lake Superior sediments: Implications for transport and cycling, Jonathan J. Kolak, David T. Long, W. Charles Kerfoot, Tina M. Beals, and Steven J. Eisenreich
Environmental beneficiation of machining wastes—Part III: Effects of metal working fluids on the spontaneous heating of machining swarf, S. Komar Kawatra and Mathew J. Hess
Fluctuation properties of precipitation. Part III: On the ubiquity and emergence of the exponential drop size spectra, A. B. Kostinski and A. R. Jameson
Effect of particle non-sphericity on satellite monitoring of drifting volcanic ash clouds, N. A. Krotkov, D. E. Flittner, A. J. Krueger, A. Kostinski, C. Riley, W. Rose, and O. Torres
Ab initio simulation of defects in energetic materials: Hydrostatic compression of cyclotrimethylene trinitramine, Maija M. Kuklja and A. Barry Kunz
Simulation of Defects in Energetic Materials. 3. The Structure and Properties of RDX Crystals with Vacancy Complexes, Maija M. Kuklja and A. Barry Kunz
Atomistic modeling of native point defects in yttrium aluminum garnet crystals, Maija M. Kuklja and Ravindra Pandey
Application of indirect force estimation techniques to the automotive transfer case, Chris V. Kurmaniak, Charles Van Karsen, and William R. Kelley
Models and Simulations of Dynamic Frictional Contact of a Beam, K. L. Kuttler, Y. Renard, and M. Shillor
A New Gripping Technique for Small Metal Specimens, D. A. La Van, P. B. Duncan, H. Zeng, and W. N. Sharpe
An improved algorithm to aid in post-heat storm restoration, Eric Laverty and Noel N. Schulz
Cramér–Rao analysis of phase-diverse wave-front sensing, David J. Lee, Michael C. Roggemann, and Byron M. Welsh
Determination of N-methylcarbamate pesticides from spiked matrices using supercritical fluid extraction, Mijeong Lee Jeong and David J. Chesney
Coherency strain-induced ordering in substitutional alloys, J. K. Lee
Constitutive modeling of textured body-centered-cubic (bcc) polycrystals, Yeong Joo Lee, Ghatu Subhash, and G. Ravichandran
An economic machining process model using fuzzy non-linear programming and neural network, Y. H. Lee, B. H. Yang, and K. S. Moon
Analytical modeling of particle size and cluster effects on particulate-filled composite, Guoqiang Li, Yi Zhao, and Su Seng Pang
Four-phase sphere modeling of effective bulk modulus of concrete, Guoqiang Li, Yi Zhao, and Su Seng Pang
Effective Young's modulus estimation of concrete, Guoqiang Li, Yi Zhao, Su Seng Pang, and Yongqi Li
Secondary xylem-specific expression of caffeoyl-coenzyme A 3-O-methyltransferase plays an important role in the methylation pathway associated with lignin biosynthesis in loblolly pine, Laigeng Li, Yuriko Osakabe, Chandrashekhar P. Joshi, and Vincent L. Chiang
Formability in non-symmetric aluminium panel drawing using active drawbeads, Rui Li and Klaus J. Weinmann
Search for spatial structures at scales Z ∼ 1. III. The effect of lensing on QSO?, V. F. Litvin, S. A. Matveef, W. E. Pereira, and V. V. Orlov
Experiments with constrained chimney-plume flows in the system ammonium chloride-water: Comparison with the unconstrained case, Shan Liu and Angus Hellawell
A Review of: “Inorganic Sytheses, Volume 32”, Rudy Luck
A Review of: “Phthalocyanine Materials Synthesis, Structure and Function”, Rudy L. Luck
1-[(1,3-Dihydro-2-benzothienyl)acetyl]-1H-Indole S-oxide, Rudy L. Luck, Dallas K. Bates, Kexue Li, and Mingde Xia
2-tert-Butyl-9,10-dibromoanthracene, Rudy L. Luck and G. David Mendenhall
In situ copper toxicity tests: Applying likelihood ratio tests to Daphnia pulex incubations in Keweenaw Peninsula waters, Ross D. Lytle
Aging mechanisms in cellulose fiber reinforced cement composites, R. MacVicar, L. M. Matuana, and J. J. Balatinecz
Preliminary assessment of the applicability of image processing for large strain measurement, S. A. Majlessi, F. Unsacar, and A. Shukla
Genotypic variation for condensed tannin production in trembling aspen (Populus tremuloides, Salicaceae) under elevated CO2 and in high- and low-fertility soil, Jennifer L. Mansfield, Peter S. Curtis, Donald R. Zak, and Kurt S. Pregitzer
Gravitationally lensed gamma-ray bursts as probes of dark compact objects, G. F. Marani, R. J. Nemiroff, J. P. Norris, K. Hurley, and J. T. Bonnell
Flammability zone prediction using calculated adiabatic flame temperatures, Chad V. Mashuga and Daniel Crowl
X-ray Photoelectron Spectroscopy study of silane-treated newsprint-fibers, L. M. Matuana, J. J. Balatinecz, C. B. Park, and R. N.S. Sodhi
Development and application of a coupled-process parameter inversion model based on the maximum likelihood estimation method, Alex S. Mayer and Changlin Huang
Measurement of mass-transfer rates for surfactant-enhanced solubilization of nonaqueous phase liquids, Alex S. Mayer, Lirong Zhong, and Gary A. Pope
A secure unrestricted advanced systems laboratory, Jean Mayo and Phil Kearns
Biodegradation of Mixtures of Polycyclic Aromatic Hydrocarbons under Aerobic and Nitrate-reducing Conditions, Dan L. McNally, James R. Mihelcic, and Donald R. Lueking
The effect of tool flexibility on back-cutting in end milled surfaces, S. N. Melkote, J. W. Sutherland, and C. King
A reexamination of the ozone-triphenyl phosphite system. The origin of triphenyl phosphate at low temperatures, G. David Mendenhall and Duane B. Priddy
Influence of the grinding wheel in the ductile grinding of brittle materials: Development and verification of kinematic based model, M. H. Miller and T. A. Dow
Demand management: The evaluation of price and due date negotiation strategies using simulation, Douglas R. Moodie
Due date demand management: Negotiating the trade-off between price and delivery, D. R. Moodie and P. M. Bobrowski
Five-legged wound-core transformer model: derivation, parameters, implementation, and evaluation, B. A. Mork
Mechanochemically synthesized NbC cermets: Part II. Mechanical properties, B. R. Murphy and T. H. Courtney
Mechanochemically synthesized NbC cermets: Part I. Synthesis and structural development, B. R. Murphy and T. H. Courtney
Preparation of hydrophobic microspheres from low-temperature melting polymeric materials, Jakub Nalaskowski, Jaroslaw Drelich, Jan Hupka, and Jan D. Miller
The nature of the universe debate in 1998, Robert J. Nemiroff and Jerry T. Bonnell
Toward a continuous record of the sky, Robert J. Nemiroff and J. Bruce Rafert
Site occupancy in ternary Ll2 ordered alloys as determined by diffraction: Observations on (Al,Cr)3 Ti alloys, J. P. Nic and D. E. Mikkola
Theoretical and experimental binding energies for the d < sup> 7 s < sup> 2 < sup> 4 F levels in Ru < sup> - , including calculated hyperfine structure and Ml decay rates, Peggy L. Norquist, Donald R. Beck, René C. Bilodeau, Michael Scheer, Raphaël A. Srawley, and Harold K. Haugen
Laser-guided direct writing for applications in biotechnology, David J. Odde and Michael J. Renn
Reduction of the environmental impact of essential manufacturing processes, Walter W. Olson, Aleksandar Filipovic, John W. Sutherland, and S. M. Pandit
Electron affinities and [Formula Presented] f values for 11 bound states of [Formula Presented] formed by [Formula Presented] and [Formula Presented] attachment, Steven M. O’Malley and Donald R. Beck
Dynamic memory disambiguation in the presence of out-of-order store issuing, Soner Onder and Ra jiv Gupta
Coniferyl aldehyde 5-hydroxylation and methylation direct syringyl lignin biosynthesis in angiosperms, Keishi Osakabe, Cheng Chung Tsao, Laigeng Li, Jacqueline L. Popko, Toshiaki Umezawa, Daniel T. Carraway, Richard H. Smeltzer, Chandrashekhar P. Joshi, and Vincent L. Chiang
The role of empirical studies in process improvement, L. M. Ott, A. Kinnula, C. Seaman, and C. Wohlin
A landscape level comparison of pre-European settlement and current soil carbon content of a forested landscape in upper Michigan, Karen E. Owens, David D. Reed, Andrew J. Londo, Ann Maclean, and Glenn D. Mroz
High frequency fatigue crack propagation behavior of a nickel-base turbine disk alloy, S. A. Padula, A. Shyam, R. O. Ritchie, and Walter Milligan
Atomistic simulation study of spinel oxides: Zinc aluminate and zinc gallate, Ravindra Pandey, Julian D. Gale, Suresh K. Sampath, and Jose M. Recio
First-principles study of stability, band structure, and optical properties of the ordered Ge < inf> 0.50 Sn < inf> 0.50 alloy, Ravindra Pandey, Michel Rérat, and Mauro Causà
Data-dependent systems profilometry of two-dimensional surfaces, Sudhakar M. Pandit and Duen Ping Chan
Erratum: Analysis of air quality data using positive matrix factorization (Environmental Science and Technology (1999) 33 (635-641)), K. G. Paterson and W. H. Glaze
Student perceptions of internet-based learning tools in environmental engineering education, Kurtis G. Paterson
Analysis of air quality data using positive matrix factorization, Kurtis G. Paterson, Jessica L. Sagady, Dianne L. Hooper, Steve B. Bertman, Mary Anne Carroll, and Paul B. Shepson
Counter-trends and potential trend conversions in the early twenty-first century, Karol I. Pelc
Application of a reynolds-stress turbulence model to gas turbine combustor calculations, P. F. Penko, K. P. Kundu, and S. L. Yang
Generalizations of the Greenberg-Rascle construction of periodic solutions to quasilinear equations of 1-D elasticity, Robert Peszek
NO < inf> x and NO < inf> y over the northwestern North Atlantic: Measurements and measurement accuracy, Matthew C. Peterson and Richard E. Honrath
Wolf-moose interaction on Isle Royale: The end of natural regulation, Rolf O. Peterson
Ecosystem consequences of wolf behavioral response to climate, Eric Post, Rolf O. Peterson, Nils Chr Stenseth, and Brian E. McLaren
The role of flank face interference in improving the accuracy of dynamic force predictions in peripheral milling, S. Ranganath, K. Narayanan, and J. W. Sutherland
Measurement of dynamic properties of automotive shock absorbers for NVH, Mohan D. Rao, Scott Gruenberg, and Homa Torab
Molecular Structure Disassembly Program (MOSDAP): A chemical information model to automate structure-based physical property estimation, John W. Raymond and Tony N. Rogers
Laser guidance and trapping of mesoscale particles in hollow-core optical fibers, Michael J. Renn, Robert Pastel, and Heather J. Lewandowski
STS at Michigan Technological University: A history and profile, Terry S. Reynolds
Chiroptical Spectroscopy, Emission Theory, James P. Riehl
Thresholds for High-cycle Fatigue in a Turbine Engine Ti-6Al-4V Alloy, R. O. Ritchie, B. L. Boyce, J. P. Campbell, O. Roder, A. W. Thompson, and Walter Milligan
The isolation and characterization of right-side-out plasma membrane vesicles from barley aleurone cells, Kim M. Robbins, Narasimhan Bhuvarahamurthy, Gay Pliska-Matyshak, and Pushpalatha P.N. Murthy
Modeling molybdenum carbide-based hydrodesulfurization (HDS) catalysts using carbon-modified Mo(110) surfaces, Charles L. Roe and Kirk H. Schulz
Micro-electro-mechanical deformable mirrors for aberration control in optical systems, Michael C. Roggemann, Victor M. Bright, Byron M. Welsh, William D. Cowan, and Max Lee
Joint processing of Hartmann sensor and conventional image measurements to estimate large aberrations: Theory and experimental results, Michael C. Roggemann, Timothy J. Schulz, Chee W. Ngai, and Jason T. Kraft
Monitoring end-mill wear and predicting tool failure using accelerometers, J. T. Roth and S. M. Pandit
Fastener design for transversely loaded composite plates, D. M. Running, J. B. Ligon, and I. Miskioglu
Inverse kinematic modeling of a coupled flexure hinge mechanism, Jae W. Ryu, Sung Q. Lee, Dae Gab Gweon, and Kee S. Moon
Electronic structure of spinel oxides: Zinc aluminate and zinc gallate, Suresh K. Sampath, D. G. Kanhere, and Ravindra Pandey
Modeling temperature gradients across edges over time in a managed landscape, Sari C. Saunders, Jiquan Chen, Thomas D. Drummer, and Thomas R. Crow
Pressure-swirl atomization in the near field, David P. Schmidt, Idriss Nouar, P. K. Senecal, C. J. Rutland, J. K. Martin, R. D. Reitz, and Jeffrey A. Hoffman
Emissions from a diesel vehicle operated on alternative fuels in Copenhagen, J. Schramm, I. Foldager, N. Olsen, and L. Gratz
The other re-engineering of engineering education, 1900-1965, Bruce E. Seely
Hollywood’s transnational appeal: Hegemony and democratic potential?, M. Mehdi Semati and Patty J. Sotirin
Structural characterization of layered LiMnO < inf> 2 electrodes by electron diffraction and lattice imaging, Y. Shao-Horn, S. A. Hackney, A. R. Armstrong, P. G. Bruce, R. Gitzendanner, C. S. Johnson, and M. M. Thackeray
Structural fatigue in spinel electrodes in Li/Lix [Mn2]O4 cells, Y. Shao-Horn, S. A. Hackney, A. J. Kahaian, K. D. Kepler, E. Skinner, J. T. Vaughey, and M. M. Thackeray
Experimental determination of the thermal accommodation and condensation coefficients of water, Raymond A. Shaw and Dennis Lamb