Explore a selection of works produced by the Department of Chemical Engineering at Michigan Technological University.

Follow

Works from 2007

Link

Electrical conductivity and rheology of carbon fiber/liquid crystal polymer composites, Julia A. King, Jason Keith, Ryan C. Smith, and Faith A. Morrison

Link

Nanoscratch testing to assess the fiber adhesion of short-carbon-fiber composites, Julia A. King, Ibrahim Miskioglu, Debra D. Wright, and Charles Van Karsen

Link

FEM calculations of capillary rheometer flow for carbon-filled liquid crystal polymer composites, Emily Kunen, Jason Keith, Peter W. Grant, Julia A. King, and Faith A. Morrison

Link

Waste Reduction in Metals Manufacturing, Carl C. Nesbitt

Link

Averaging theory for diesel particulate filter regeneration, Haishan Zheng and Jason Keith

Works from 2006

Link

Recovery of scrap iron metal value using biogenerated ferric iron, Nicholas R. Ballor, Carl C. Nesbitt, and Donald R. Lueking

Link

Measuring and predicting in-plane thermal conductivity of carbon-filled nylon 6,6 polymer composites, Jason Keith, Carl D. Hingst, Michael G. Miller, Julia A. King, and Rebecca A. Hauser

Link

Electrical conductivity modeling of carbon-filled liquid-crystalline polymer composites, Jason Keith, Julia A. King, and Rodwick L. Barton

Link

Thermal conductivity of carbon fiber/liquid crystal polymer composites, Jason Keith, Julia A. King, Michael G. Miller, and Amanda M. Tomson

Link

Creating a mutant luciferase resistant to HPV chemical inhibition by random mutagenesis and colony-level screening, Eileen Kim-Choi, Christiane Danilo, Jeffrey Kelly, Ronnie Carroll, David Shonnard, and Irina Rybina

Link

Thermal and electrical conductivity of carbon-filled Liquid Crystal Polymer composites, Julia A. King, Michael G. Miller, Rodwick L. Barton, Jason Keith, Rebecca A. Hauser, Karl R. Peterson, and Lawrence L. Sutter

Link

Electrical conductivity and rheology of carbon-filled liquid crystal polymer composites, Julia A. King, Faith A. Morrison, Jason Keith, Michael G. Miller, Ryan C. Smith, Mariana Cruz, Amanda M. Neuhalfen, and Rodwick L. Barton

Link

Measuring thermal conductivities of anisotropic synthetic graphite-liquid crystal polymer composites, Michael G. Miller, Jason Keith, Julia A. King, Brian J. Edwards, Nils Klinkenberg, and David A. Schiraldi

Link

Comparison of the guarded-heat-flow and transient-plane-source methods for carbon-filled nylon 6,6 composites: Experiments and modeling, Michael G. Miller, Jason Keith, Julia A. King, Rebecca A. Hauser, and Angela M. Moran

Link

Microfabrication by X-ray-induced polymerization above the lower critical solution temperature, Vijay R. Tirumala, Gerard T. Caneba, Derrick C. Mancini, and H. H. Wang

Link

In vitro flexural properties of hydroxyapatite and self-reinforced poly(L-lactic acid), Debra D. Wright-Charlesworth, Julia A. King, Darinda M. Miller, and Cho Hui Lim

Works from 2005

Link

Shielding-effectiveness modeling of carbon-fiber/nylon-6,6 composites, Nicholas B. Janda, Jason M. Keith, Julia A. King, Warren F. Perger, and Troy J. Oxby

Link

Shielding effectiveness density theory for carbon fiber/nylon 6,6 composites, Jason Keith, Nicholas B. Janda, Julia A. King, Warren F. Perger, and Troy J. Oxby

Link

Nanoindentation of injection molded PLA and self-reinforced composite PLA after in vitro conditioning for three months, Debra D. Wright-Charlesworth, Darinda M. Miller, Ibrahim Miskioglu, and Julia A. King

Works from 2004

Link

Tensile and impact properties of carbon filled Nylon-6,6 based resins, Jessica A. Heiser, Julia A. King, Jeremiah P. Konell, Ibrahim Miskioglu, and Lawrence L. Sutter

Link

Electrical conductivity of carbon filled nylon 6,6, Jessica A. Heiser, Julia A. King, Jeremiah P. Konell, and Lawrence L. Sutter

Link

Shielding effectiveness of carbon-filled nylon 6,6, Jessica A. Heiser, Julia A. King, Jeremiah P. Konell, and Lawrence L. Sutter

Link

Synergistic effects of carbon fillers on tensile and impact properties in nylon 6,6 and polycarbonate based resins, Jeremiah P. Konell, Julia A. King, and Ibrahim Miskioglu

Link

New Design for Efficient Diesel Particulate Trap Regeneration, Haishan Zheng and Jason Keith

Works from 2003

Link

Amphiphilic styrene-acrylic acid copolymers from the free-radical retrograde-precipitation polymerization (FRRPP) process, Gerard T. Caneba, Yi Zhao, and Yadunandan L. Dar

Link

Automating hierarchical environmentally-conscious design using integrated software: VOC recovery case study, Hui Chen, Tony N. Rogers, Bruce A. Barna, and David Shonnard

Link

Development of an additive equation for predicting the electrical conductivity of carbon-filled composites, Matthew L. Clingerman, Erik H. Weber, Julia A. King, and Kirk H. Schulz

Link

Tensile modulus modeling of carbon-filled nylon 6,6 and polycarbonate-based resins, Jeremiah P. Konell, Julia A. King, and Ibrahim Miskioglu

Link

Synergistic effects of carbon fillers on shielding effectiveness in conductive nylon 6,6- and polycarbonate-based resins, Quinton J. Krueger and Julia A. King

Link

Nanoparticles from a controlled polymerization process, Vijaya R. Tirumala, Gerard T. Caneba, Yadunandan Dar, Hsien Hau Wang, and Derrick C. Mancini

Link

Thermally conductive nylon 6,6 and polycarbonate based resins. II. Modeling, Erik H. Weber, Matthew L. Clingerman, and Julia A. King

Link

Thermally conductive nylon 6,6 and polycarbonate based resins. I. Synergistic effects of carbon fillers, Erik H. Weber, Matthew L. Clingerman, and Julia A. King

Works from 2002

Link

Evaluation of electrical conductivity models for conductive polymer composites, Matthew L. Clingerman, Julia A. King, Kirk H. Schulz, and Jeffrey D. Meyers

Link

Synergistic effects of carbon fillers in electrically conductive nylon 6,6 and polycarbonate based resins, Matthew L. Clingerman, Erik H. Weber, Julia A. King, and Kirk H. Schulz

Link

Novel scheme for delaying reverse-flow reactor runaway, Jason Keith

Link

Studies of spinodal decomposition in a ternary polymer-solvent-nonsolvent system, Rahul Saxena and Gerard T. Caneba

Works from 2001

Link

Green engineering: Environmentally conscious design of chemical processes and products, David T. Allen and David Shonnard

Link

Factorial design approach applied to electrically and thermally conductive nylon 6,6, Julia A. King, Kenneth W. Tucker, Jeffrey D. Meyers, Erik H. Weber, Matthew L. Clingerman, and Kip R. Ambrosius

Works from 2000

Link

Derivation of Le Chatelier's mixing rule for flammable limits, Chad V. Mashuga and Daniel Crowl

Link

Effects of impact modifiers on the properties of rigid PVC/wood-fiber composites, Fatih Mengeloglu, Laurent M. Matuana, and Julia A. King

Link

Laser-guided direct writing of living cells, David J. Odde and Michael J. Renn

Link

Safety Aspects during Transient and Steady-State Operation of a Pilot-Scale Distillation Column, Douglas E. Stark, David Shonnard, and Daniel Crowl

Works from 1999

Link

Flammability zone prediction using calculated adiabatic flame temperatures, Chad V. Mashuga and Daniel Crowl

Link

Polymerization Control Through the Free-Radical Retrograde-Precipitation Polymerization Process, Bo Wang, Yadunandan Dar, Linhuo Shi, and Gerard T. Caneba

Works from 1998

Link

Kinase and phosphatase inhibitors cause rapid alterations in microtubule dynamic instability in living cells, B. Howell, D. J. Odde, and L. Cassimeris

Link

Application of the Flammability Diagram for Evaluation of Fire and Explosion Hazards of Flammable Vapors, Chad V. Mashuga and Daniel Crowl

Link

Process Simulation and Control Center: An Automated Pilot Plant Laboratory, Anton J. Pintar, David W. Caspary, Tomas B. Co, Edward R. Fisher, and Nam K. Kim

Works from 1997

Link

Consequence modeling for the EPA Risk Management Plan (RMP), Daniel Crowl

Works from 1996

Link

Studies of the polymerization of methacrylic acid via free-radical retrograde precipitation polymerization process, Anuj Aggarwal, Rahul Saxena, Bo Wang, and Gerard T. Caneba

Link

Analysis of polymer membrane formation through spinodal decomposition. Part 4: Computer simulation of early-stage coarsening, Gerard T. Caneba and Rahul Saxena

Link

Stress-enhanced transport of toluene in poly aryl ether ether ketone (PEEK), Clarence J. Wolf and Holly Fu

Works from 1995

Link

Morphological studies of late‐stage spinodal decomposition in polystyrene–cyclohexanol system, Hong‐Fei ‐F Guo, Anand Laxminarayan, Gerard T. Caneba, and Karel Solc

Works from 1993

Link

Analysis of polymer membrane formation through spinodal decomposition. III: Two‐dimensional simulations of early‐stage behavior, Yuh‐Ling ‐L Chen, Karel Solc, and Gerard T. Caneba

Works from 1992

Link

Free‐radical retrograde‐precipitation polymerization process, Gerard T. Caneba

Link

A study of shear‐stress relaxation anomalies in binary mixtures of monodisperse polystyrenes, Faith A. Morrison and Ronald G. Larson

Works from 1991

Link

Analysis of polymer membrane formation through spinodal decomposition, Gerard T. Caneba

Works from 1990

Link

PS–PMMA Block copolymer system as compatibilizer for PS–PVC blends, Gerard T. Caneba and Srinivasarao Kandiraju

Link

Chemiluminescence Techniques for the Characterization of Materials [New Analytical Methods (41)], G. David Mendenhall

Works from 1989

Link

A MIMO cautious self‐tuning controller, Apostolos V. Papadoulis and Spyros A. Svoronos

Works from 1988

Link

Intermittency in nonisothermal CSTR, G. T. Caneba and Barbara Densch

Works from 1987

Link

Ab initio studies of hyponitrous acid, Richard E. Brown, G. David Mendenhall, and Rodney J. Bartlett

Link

An optimized gas chromatographic determination of priority pollutant phenols, O. H. Masi and W. M. Gulick

Link

Slow luminescence emission from polymers with a hyperbolic decay law. A survey of commercial materials with an apparatus of wide aperture, G. D. Mendenhall and H. K. Agarwal

Works from 1986

Link

Intramolecular capture of pummerer rearrangement intermediates. I. Synthesis of pyrrolo[2,1‐c][1,4]benzothiazines, Dallas K. Bates, R. Thomas Winters, and Burnell A. Sell

Works from 1985

Link

Impact strength and melt viscosity of bisphenol‐a polycarbonate and styrene‐maleic‐anhydride copolymer blends, Marion Glenn Hansen and David G. Bland

Link

Deuterium isotope cage effects in the dismutation of alkoxyl radicals. Significance for the mode of alkylperoxyl termination, G. D. Mendenhall and E. M.Y. Quinga

Link

The influence of environment on the drop size - contact angle relationship, A. B. Ponter and M. Yekta-Fard

Works from 1984

Link

Phosphorous‐containing analogues of aspartame, Victor Nelson and Przemslaw Mastalerz

Link

Influence of Liquid Viscosity on Effective Interfacial Area in Packed Columns, Anthony B. Ponter and Patrick H. Au‐Yeung

Works from 1983

Link

Estimation of liquid film mass transfer coefficients for randomly packed absorption columns, Patrick H. Au‐Yeung and Anthony B. Ponter

Link

SCF and CI Studies of Hund's rules for the effects of electronic correlation and delocalization. I, Richard E. Brown and Johannes Pieter Colpa

Link

Synthesis of some 4‐substituted‐2‐(o‐halogenophenyl)‐1,2,3‐triazoles, David L. Swartz, Angela R. Karash, Laura A. Berry, and David L. Jaeger

Works from 1982

Link

Estimation of liquid film mass transfer coefficients for columns randomly packed with partially wetted rings, Anthony B. Ponter and Patrick H. Au‐Yeung

Works from 1981

Link

Nonisothermal kinetic analysis of the chemiluminescence from tetramethyl‐1,2‐dioxetane, G. D. Mendenhall, J. C. Tauschek, and C. A. Ogle

Link

Psilocin analogs II. Synthesis of 3‐[2‐(dialkylamino)ethyl]‐, 3‐[2‐(N‐methyl‐N‐alkylamino)ethyl]‐, and 3‐[2‐(cycloalkylamino)ethyl]indol‐4‐ols, David B. Repke, Wilfred J. Ferguson, and Dallas K. Bates

Link

Wet oxidation of glucose, J. M. Skaates, B. A. Briggs, R. A. Lamparter, and C. R. Baillod

Works from 1980

Link

Confirmation of the structure of the bicyclic oxidation product of dehydroascorbic acid bis‐phenylhydrazone, Hassan S. El Khadem, El Sayed H. El Ashry, David L. Jaeger, George P. Kreishman, and Rodger L. Foltz

Link

Liquid Film Mass Transfer Coefficients for Packed Columns Using Organic and Aqueous Systems, Anthony B. Ponter, Glenn L. Pfennigwerth, and Robert J. Mangers

Link

The structure of some methyl and benzyl malonate derivatives of pyrimidine, G. Fredric Reynolds and Marc B. Fenwick

Works from 1979

Link

Synthesis of 2‐(o‐chloropheny)‐ and 2‐(2′,6′‐dichlorophenyl)‐4‐formyl‐1,2,3‐triazoles, David L. Swartz and Hassan S. El Khadem

Works from 1978

Link

Synthesis of dextroamphetamine sulfate and methamphetamine hydrochloride from D‐phenylalanine, David B. Repke, Dallas K. Bates, and Wilfred J. Ferguson

Link

Characterizing the effect of feed rate in continuous flow vessels having turbine agitators, C. N. Williams and D. W. Hubbard

Works from 1977

Link

Pyrazolones and quinoxalines from 4‐phenyl‐2,3‐dioxobutyro‐1,4‐lactone, H. M. Mokhtar, Z. M. El‐Shafei, H. S. El Khadem, and D. L. Swartz

Link

Psilocin analogs. 1. Synthesis of 3‐[2‐(dialkylamino)ethyl] ‐and 3‐[2‐(cycloalkylamino)ethyl] indol‐4‐ols, David B. Repke, Wilfred J. Ferguson, and Dallas K. Bates

Works from 1975

Link

Chloropalladation of 2‐phenyl‐1,2,3‐triazoles as a means of selective o‐chlorination, J. A.C. Allison, H. S. El Khadem, and C. A. Wilson

Link

Mass spectra of substituted pyrazolo[1,5‐a]‐1,3,5‐triazines, Hassan S. El Khadem, Rodger L. Foltz, Thomas Novinson, and Keitaro Senga

Link

Mass spectra of styrylpyridinecarboxylates, H. S. El Khadem, L. Rateb, and H. Mokhtar

Link

Tautomerism in malonic ester derivatives of s‐triazine, C. Fredric Reynolds and Arthur F. Saari

Works from 1974

Link

Mass spectra of 5‐styryl and 5‐acylpyrazoles, Hassan El Khadem, Rodger L. Foltz, and Derek Horton

Link

Mixing by impeller agitation in continuous flow systems containing polysaccharide solutions, D. N. Johnson and D. W. Hubbard

Works from 1973

Link

Synthesis of pyrazoles and oxyquinoxalines from 2,4‐dioxohexenoales, H. El Khadem, Zaki El‐Shafei, Latif Rateb, and Hassan Mokhtar

Link

3‐Acetoxy‐1‐Phenylpyrazolin‐4,5‐dione‐4‐Arylhydrazne and related compounds, Hassan Saad El Khadem and El Sayed El Ashry

Link

The rate of γ‐benzyl‐L‐glutamate NCA polymerizations, Fred D. Williams and Ronald D. Brown

Works from 1972

Link

Malonic ester derivatives of s‐Triazine, C. Fredric Reynolds, Robert Berner, and William Boutwell

Link

Dynamic similarity for imperfect mixing processes: Non‐newtonian fluids, Davis W. Hubbard and Frederick F. Calvetti

Works from 1971

Link

Hydrodynamic measurements for imperfect mixing processes: Newtonian Fluids, Davis W. Hubbard and Harish Patel

Link

Stereoselective polymerization of γ‐Benzyl Glutamate NCA, Fred D. Williams, M. Eshaque, and Ronald D. Brown

Works from 1968

Link

Correlation of mass transfer data: Comments on an article by Son and Hanratty, Davis W. Hubbard

Works from 1967

Link

Simple ways to calculate the empirical resonance energies of benzenoid hydrocarbons, their derivatives, and graphite, Reino W. Hakala

Link

The use of normalized binomial coefficients as weights to accelerate convergence of oscillatory first‐order iterations, Reino W. Hakala