Explore a selection of works produced by the Department of Chemical Engineering at Michigan Technological University.

Follow

Works from 2006

Link

Comparison of the guarded-heat-flow and transient-plane-source methods for carbon-filled nylon 6,6 composites: Experiments and modeling, Michael G. Miller, Jason Keith, Julia A. King, Rebecca A. Hauser, and Angela M. Moran

Link

Microfabrication by X-ray-induced polymerization above the lower critical solution temperature, Vijay R. Tirumala, Gerard T. Caneba, Derrick C. Mancini, and H. H. Wang

Link

In vitro flexural properties of hydroxyapatite and self-reinforced poly(L-lactic acid), Debra D. Wright-Charlesworth, Julia A. King, Darinda M. Miller, and Cho Hui Lim

Works from 2005

Link

Dust suppression in iron ore processing plants, C. R. Copeland and S. K. Kawatra

Link

Shielding-effectiveness modeling of carbon-fiber/nylon-6,6 composites, Nicholas B. Janda, Jason M. Keith, Julia A. King, Warren F. Perger, and Troy J. Oxby

Link

Shielding effectiveness density theory for carbon fiber/nylon 6,6 composites, Jason Keith, Nicholas B. Janda, Julia A. King, Warren F. Perger, and Troy J. Oxby

Link

Nanoindentation of injection molded PLA and self-reinforced composite PLA after in vitro conditioning for three months, Debra D. Wright-Charlesworth, Darinda M. Miller, Ibrahim Miskioglu, and Julia A. King

Works from 2004

Link

Tensile and impact properties of carbon filled Nylon-6,6 based resins, Jessica A. Heiser, Julia A. King, Jeremiah P. Konell, Ibrahim Miskioglu, and Lawrence L. Sutter

Link

Electrical conductivity of carbon filled nylon 6,6, Jessica A. Heiser, Julia A. King, Jeremiah P. Konell, and Lawrence L. Sutter

Link

Shielding effectiveness of carbon-filled nylon 6,6, Jessica A. Heiser, Julia A. King, Jeremiah P. Konell, and Lawrence L. Sutter

Link

Synergistic effects of carbon fillers on tensile and impact properties in nylon 6,6 and polycarbonate based resins, Jeremiah P. Konell, Julia A. King, and Ibrahim Miskioglu

Link

New Design for Efficient Diesel Particulate Trap Regeneration, Haishan Zheng and Jason Keith

Works from 2003

Link

Amphiphilic styrene-acrylic acid copolymers from the free-radical retrograde-precipitation polymerization (FRRPP) process, Gerard T. Caneba, Yi Zhao, and Yadunandan L. Dar

Link

Automating hierarchical environmentally-conscious design using integrated software: VOC recovery case study, Hui Chen, Tony N. Rogers, Bruce A. Barna, and David Shonnard

Link

Development of an additive equation for predicting the electrical conductivity of carbon-filled composites, Matthew L. Clingerman, Erik H. Weber, Julia A. King, and Kirk H. Schulz

Link

Studies on the relationship between plate water absorption and unfired iron ore pellet strength, S. K. Kawatra and S. J. Ripke

Link

Tensile modulus modeling of carbon-filled nylon 6,6 and polycarbonate-based resins, Jeremiah P. Konell, Julia A. King, and Ibrahim Miskioglu

Link

Synergistic effects of carbon fillers on shielding effectiveness in conductive nylon 6,6- and polycarbonate-based resins, Quinton J. Krueger and Julia A. King

Link

Effect of cations on unfired magnetite pellet strength, S. J. Ripke and S. K. Kawatra

Link

Nanoparticles from a controlled polymerization process, Vijaya R. Tirumala, Gerard T. Caneba, Yadunandan Dar, Hsien Hau Wang, and Derrick C. Mancini

Link

Thermally conductive nylon 6,6 and polycarbonate based resins. II. Modeling, Erik H. Weber, Matthew L. Clingerman, and Julia A. King

Link

Thermally conductive nylon 6,6 and polycarbonate based resins. I. Synergistic effects of carbon fillers, Erik H. Weber, Matthew L. Clingerman, and Julia A. King

Works from 2002

Link

Evaluation of electrical conductivity models for conductive polymer composites, Matthew L. Clingerman, Julia A. King, Kirk H. Schulz, and Jeffrey D. Meyers

Link

Synergistic effects of carbon fillers in electrically conductive nylon 6,6 and polycarbonate based resins, Matthew L. Clingerman, Erik H. Weber, Julia A. King, and Kirk H. Schulz

Link

Novel scheme for delaying reverse-flow reactor runaway, Jason Keith

Link

Studies of spinodal decomposition in a ternary polymer-solvent-nonsolvent system, Rahul Saxena and Gerard T. Caneba

Works from 2001

Link

Green engineering: Environmentally conscious design of chemical processes and products, David T. Allen and David Shonnard

Link

Factorial design approach applied to electrically and thermally conductive nylon 6,6, Julia A. King, Kenneth W. Tucker, Jeffrey D. Meyers, Erik H. Weber, Matthew L. Clingerman, and Kip R. Ambrosius

Works from 2000

Link

Derivation of Le Chatelier's mixing rule for flammable limits, Chad V. Mashuga and Daniel Crowl

Link

Effects of impact modifiers on the properties of rigid PVC/wood-fiber composites, Fatih Mengeloglu, Laurent M. Matuana, and Julia A. King

Link

Laser-guided direct writing of living cells, David J. Odde and Michael J. Renn

Link

Safety Aspects during Transient and Steady-State Operation of a Pilot-Scale Distillation Column, Douglas E. Stark, David Shonnard, and Daniel Crowl

Works from 1999

Link

Flammability zone prediction using calculated adiabatic flame temperatures, Chad V. Mashuga and Daniel Crowl

Link

Polymerization Control Through the Free-Radical Retrograde-Precipitation Polymerization Process, Bo Wang, Yadunandan Dar, Linhuo Shi, and Gerard T. Caneba

Works from 1998

Link

Kinase and phosphatase inhibitors cause rapid alterations in microtubule dynamic instability in living cells, B. Howell, D. J. Odde, and L. Cassimeris

Link

Application of the Flammability Diagram for Evaluation of Fire and Explosion Hazards of Flammable Vapors, Chad V. Mashuga and Daniel Crowl

Link

Diffusion inside microtubules, David J. Odde

Link

Process Simulation and Control Center: An Automated Pilot Plant Laboratory, Anton J. Pintar, David W. Caspary, Tomas B. Co, Edward R. Fisher, and Nam K. Kim

Works from 1997

Link

Consequence modeling for the EPA Risk Management Plan (RMP), Daniel Crowl

Works from 1996

Link

Studies of the polymerization of methacrylic acid via free-radical retrograde precipitation polymerization process, Anuj Aggarwal, Rahul Saxena, Bo Wang, and Gerard T. Caneba

Link

Analysis of polymer membrane formation through spinodal decomposition. Part 4: Computer simulation of early-stage coarsening, Gerard T. Caneba and Rahul Saxena

Link

Stress-enhanced transport of toluene in poly aryl ether ether ketone (PEEK), Clarence J. Wolf and Holly Fu

Works from 1995

Link

Morphological studies of late‐stage spinodal decomposition in polystyrene–cyclohexanol system, Hong‐Fei ‐F Guo, Anand Laxminarayan, Gerard T. Caneba, and Karel Solc

Link

Naphthalene biosorption in soil/water systems of low or high sorptive capacity, B. E. Whitman, J. R. Mihelcic, and D. R. Lueking

Works from 1994

Link

Sol-gel kinetics for the synthesis of multi-component glass materials - Code: CP13, A. A. Kline, T. N. Rogers, M. E. Mullins, B. C. Cornilsen, and Lj M. Sokolov

Link

Formation of the interphase in organic-matrix composites, J. G. Williams, M. R. James, and W. L. Morris

Works from 1993

Link

Analysis of polymer membrane formation through spinodal decomposition. III: Two‐dimensional simulations of early‐stage behavior, Yuh‐Ling ‐L Chen, Karel Solc, and Gerard T. Caneba

Works from 1992

Link

Free‐radical retrograde‐precipitation polymerization process, Gerard T. Caneba

Link

Fabrication of metal matrix composites of, Y. Choi, M. E. Mullins, K. Wijayatilleke, and J. K. Lee

Link

A study of shear‐stress relaxation anomalies in binary mixtures of monodisperse polystyrenes, Faith A. Morrison and Ronald G. Larson

Works from 1991

Link

Analysis of polymer membrane formation through spinodal decomposition, Gerard T. Caneba

Link

Finite rise time step strain modeling of nearly monodisperse polymer melts and solutions, R. W. Kolkka, D. S. Malkus, and T. R. Rose

Link

Raman spectral observation of a 'new phase' observed in nickel electrodes cycled to failure, P. L. Loyselle, X. Shan, B. C. Cornilsen, and M. A. Reid

Works from 1990

Link

PS–PMMA Block copolymer system as compatibilizer for PS–PVC blends, Gerard T. Caneba and Srinivasarao Kandiraju

Link

Structural comparison of nickel electrodes and precursor phases, Bahne C. Cornilsen, Xiaoyin Shan, and Patricia L. Loyselle

Link

Control studies on the advanced composites manufacturing process, T. B. Co, J. G. Williams, and Zheng Chen

Link

Correlation of the gibbs free energy of transfer of fluoride ion from water to other solvents with solvent actidity and polarity parameters, Dean C. Luehrs and Kalpana A. Godbole

Link

Chemiluminescence Techniques for the Characterization of Materials [New Analytical Methods (41)], G. David Mendenhall

Works from 1989

Link

Synthesis of nitrogen-bridged purine-like C-nucleosides from ethyl 2,5-anhydro-6-O-benzoyl-d-allonodithioate, Hassan S. El Khadem, Joshua Kawai, and David L. Swartz

Link

Linear free energy relationship of the energy of the CTTS transition of Halide ions with the solvatochromic parameter α, Dean C. Luehrs, Richard E. Brown, and Kalpana A. Godbole

Link

A MIMO cautious self‐tuning controller, Apostolos V. Papadoulis and Spyros A. Svoronos

Works from 1988

Link

The Microwave Spectrum, Structure and Dipole Moment of Cyclobutene Ozonide (2,3,7-trioxabicyclo[2.2.1]heptane), Donald G. Borseth, Primož Lorenčak, Hassan M. Badawi, Kurt W. Hillig, R. L. Kuczkowski, and G. David Mendenhall

Link

Intermittency in nonisothermal CSTR, G. T. Caneba and Barbara Densch

Link

Structural models for nickel electrode active mass, B. C. Cornilsen, P. J. Karjala, and P. L. Loyselle

Link

Direct determination of electron-hole trap depth from delayed luminescence of poly-(N-vinylcarbazole), Xiaoping Guo and G. David Mendenhall

Link

Effect of calcium chloride and calcium acetate on the reactivity of a lignite coal at low heating rate, Wei Ping Pan and M. A. Serageldin

Link

A thermogravimetric study of the decomposition rate of chlorinated polyethylenes under ignition conditions, M. A. Serageldin and Hai Wang

Works from 1987

Link

Ab initio studies of hyponitrous acid, Richard E. Brown, G. David Mendenhall, and Rodney J. Bartlett

Link

A simple model for predicting polymer ignition in a thermogravimetric analyzer, Y. H. Huang and M. A. Serageldin

Link

An optimized gas chromatographic determination of priority pollutant phenols, O. H. Masi and W. M. Gulick

Link

Slow luminescence emission from polymers with a hyperbolic decay law. A survey of commercial materials with an apparatus of wide aperture, G. D. Mendenhall and H. K. Agarwal

Link

Structural characterization of lignite coal and char with CaCl2, W. P. Pan and M. A. Serageldin

Link

Effect of operating parameters on time to decomposition of high density polyethylene and chlorinated polyethylenes, M. A. Serageldin and Hai Wang

Works from 1986

Link

Intramolecular capture of pummerer rearrangement intermediates. I. Synthesis of pyrrolo[2,1‐c][1,4]benzothiazines, Dallas K. Bates, R. Thomas Winters, and Burnell A. Sell

Works from 1985

Link

Impact strength and melt viscosity of bisphenol‐a polycarbonate and styrene‐maleic‐anhydride copolymer blends, Marion Glenn Hansen and David G. Bland

Link

Deuterium isotope cage effects in the dismutation of alkoxyl radicals. Significance for the mode of alkylperoxyl termination, G. D. Mendenhall and E. M.Y. Quinga

Link

The influence of environment on the drop size - contact angle relationship, A. B. Ponter and M. Yekta-Fard

Works from 1984

Link

Solid State Vibrational Spectra of Calcium Pyrophosphate Dihydrate, Bahne C. Cornilsen

Link

Structure, and kinetics of the thermal decomposition of organic phosphite ozonides, G. D. Mendenhall, R. F. Kessick, and M. Dobrzelewski

Link

Phosphorous‐containing analogues of aspartame, Victor Nelson and Przemslaw Mastalerz

Link

Contact Angle Variation on Polymer Surfaces, A. B. Ponter and M. Yekta-Fard

Link

Influence of Liquid Viscosity on Effective Interfacial Area in Packed Columns, Anthony B. Ponter and Patrick H. Au‐Yeung

Link

Coal analysis using thermogravimetry, M. A. Serageldin and Wei Ping Pan

Works from 1983

Link

Estimation of liquid film mass transfer coefficients for randomly packed absorption columns, Patrick H. Au‐Yeung and Anthony B. Ponter

Link

SCF and CI Studies of Hund's rules for the effects of electronic correlation and delocalization. I, Richard E. Brown and Johannes Pieter Colpa

Link

Improved synthesis of 2,5-anhydro-d-allononitrile, Hassan S. El Khadem and Joshua Kawai

Link

1-(2,3-O-isopropylidene-α- and -β-d-ribofuranosyl)-4,5-di-(methoxycarbonyl)-1,2,3-triazoles: An exception to the Δδ criterion for configurational assignment, Marshall W. Logue and Byung Hee Han

Link

d-ribofuranosyl azides. A direct conversion of 1-O-acyl-2,3-O-isopropylidene-d-ribofuranose into d-ribofuranosyl azides, Marshall W. Logue and Byung Hee Han

Link

Synthesis of methyl 3,5-di-O-benzoyl-2,6-dideoxy-β-l-lyxo-hexofuranoside, a nucleoside precursor, Victor Nelson and Hassan S. El Khadem

Link

Coal: Kinetic analysis of thermogravimetric data, M. A. Serageldin and Wei Ping Pan

Link

Synthesis of 8-β-d-ribofuranosylpyrazolo[1,5-d]-1,2,4-triazin-4(3H)-one, an inosine C-nucleoside analog, David L. Swartz and Hassan S. El Khadem

Link

Synthesis of some 4‐substituted‐2‐(o‐halogenophenyl)‐1,2,3‐triazoles, David L. Swartz, Angela R. Karash, Laura A. Berry, and David L. Jaeger

Works from 1982

Link

On the applicability of CNDO indices for the prediction of chemical reactivity, Richard E. Brown and Alfredo Mayall Simas

Link

Estimation of liquid film mass transfer coefficients for columns randomly packed with partially wetted rings, Anthony B. Ponter and Patrick H. Au‐Yeung

Works from 1981

Link

On the determination of kinetic rate and mass transport coefficients in laser pump-probe experiments, Stephen E. Bialkowski

Link

Two-magnon Raman scattering in calcium doped NiO, E. F. Funkenbusch and B. C. Cornilsen

Link

Nonisothermal kinetic analysis of the chemiluminescence from tetramethyl‐1,2‐dioxetane, G. D. Mendenhall, J. C. Tauschek, and C. A. Ogle

Link

Psilocin analogs II. Synthesis of 3‐[2‐(dialkylamino)ethyl]‐, 3‐[2‐(N‐methyl‐N‐alkylamino)ethyl]‐, and 3‐[2‐(cycloalkylamino)ethyl]indol‐4‐ols, David B. Repke, Wilfred J. Ferguson, and Dallas K. Bates

Link

An Improved Method of Dissolving Rock Minerals: Preparation of a Kerogen Concentrate from Antrim Shale, Vernon R. Sandel and Paul J. Walcheski

Link

Wet oxidation of glucose, J. M. Skaates, B. A. Briggs, R. A. Lamparter, and C. R. Baillod