Works from 1999
Existence and Uniqueness of Solutions for a Dynamic One-Dimensional Damage Model, Michel Frémond, Kenneth L. Kuttler, and Meir Shillor
Global chemical erosion over the last 250 MY: Variations due to changes in paleogeography, paleoclimate, and paleogeology, Mark T. Gibbs, Gregg J.S. Bluth, Peter J. Fawcett, and Lee R. Kump
Laboratory studies of aqueous partitioning tracer tests for measuring nonaqueous phase liquid volumes, John S. Gierke, Deborah L. Sanders, and David L. Perram
Energy spectra and composition near the knee, M. A.K. Glasmacher, M. A. Catanese, M. C. Chantell, C. E. Covault, J. W. Cronin, B. E. Fick, L. F. Fortson, J. W. Fowler, K. D. Green, D. B. Kieda, J. Matthews, B. J. Newport, D. F. Nitz, R. A. Ong, S. Oser, D. Sinclair, and J. C. Van der Velde
The cosmic ray composition between 10 < sup> 14 and 10 < sup> 16 eV, M. A.K. Glasmacher, M. A. Catanese, M. C. Chantell, C. E. Covault, J. W. Cronin, B. E. Fick, L. F. Fortson, J. W. Fowler, K. D. Green, D. B. Kieda, J. Matthews, B. J. Newport, D. F. Nitz, R. A. Ong, S. Oser, D. Sinclair, and J. C. Van Der Velde
The cosmic ray energy spectrum between 10 < sup> 14 and 10 < sup> 16 eV, M. A.K. Glasmacher, M. A. Catanese, M. C. Chantell, C. E. Covault, J. W. Cronin, B. E. Fick, L. F. Fortson, J. W. Fowler, K. D. Green, D. B. Kieda, J. Matthews, B. J. Newport, D. F. Nitz, R. A. Ong, S. Oser, D. Sinclair, and J. C. Van Der Velde
An experimental investigation into the effect of process conditions on the mass concentration of cutting fluid mist in turning, Kenneth L. Gunter and John W. Sutherland
Dislocations and disclinations in the gradient theory of elasticity, M. Yu Gutkin and E. C. Aǐfantis
Computer simulation of biological macromolecules in generalized ensembles, Ulrich H.E. Hansmann
Recent results from generalized-ensemble protein-folding simulations, Ulrich H.E. Hansmann
New Monte Carlo algorithms for protein folding, Ulrich H.E. Hansmann and Yuko Okamoto
Tackling the protein folding problem by a generalized-ensemble approach with Tsallis statistics, Ulrich H.E. Hansmann and Yuko Okamoto
Introduction: Testing the claims, Gail E. Hawisher and Cynthia L. Selfe
Environmental beneficiation of machining wastes—Part I: Material characterization of machining swarf, Mathew J. Hess and S. Komar Kawatra
Another logarithmic functional equation, Konrad J. Heuvers
United States surveillance over Mexican lives at the border: Snapshots of an emerging regime, Josiah Mc C. Heyman
Why interdiction? Immigration control at the United States-Mexico border, Josiah Mc C. Heyman
SPH hydrocodes can be stabilized with shape-shifting, D. L. Hicks and L. M. Liebrock
Improved rover state estimation in challenging terrain, Brian D. Hoffman, Eric T. Baumgartner, Terry L. Huntsberger, and Paul S. Schenker
Analysis of intersonic crack growth in unidirectional fiber-reinforced composites, Y. Huang, W. Wang, C. Liu, and A. J. Rosakis
Three-wave interaction solitons in optical parametric amplification, E. Ibragimov, A. A. Struthers, D. J. Kaup, J. D. Khaydarov, and K. D. Singer
Release of copper from mine tailings on the Keweenaw Peninsula, Jaebong Jeong, Noel R. Urban, and Sarah Green
Structural and electrochemical analysis of layered compounds from Li < inf> 2 MnO < inf> 3 , C. S. Johnson, S. D. Korte, J. T. Vaughey, M. M. Thackeray, T. E. Bofinger, Y. Shao-Horn, and S. A. Hackney
Finite element geometry creation using three- dimensional laser profilo, N. Jordache, S. M. Pandit, and K. M. Cronin
Environmental beneficiation of machining wastes—Part II: Measurement of the effects of moisture on the spontaneous heating of machining swarf, S. Komar Kawatra and Mathew J. Hess
Anthropogenic copper inventories and mercury profiles from Lake Superior: Evidence for mining impacts, W. Charles Kerfoot, Sandra Harting, Ronald Rossmann, and John A. Robbins
Nearshore regions of Lake Superior: Multi-element signatures of mining discharges and a test of Pb-210 deposition under conditions of variable sediment mass flux, W. Charles Kerfoot and John A. Robbins
Copper mining, copper cycling and mercury in the Lake Superior ecosystem: An introduction, W. C. Kerfoot and J. O. Nriagu
LB-AUT7, a novel symbiosis-regulated gene from an ectomycorrhizal fungus, Laccaria bicolor, is functionally related to vesicular transport and autophagocytosis, Sung Jae Kim, Daniela Bernreuther, Michael Thumm, and Gopi K. Podila
Cloning and identification of symbiosis-regulated genes from the ectomycorrhizal Laccaria bicolor, Sung Jae Kim, Shivanand T. Hiremath, and Gopi K. Podila
Clonal variation in above- and below-ground growth responses of Populus tremuloides Michaux: Influence of soil warming and nutrient availability, John S. King, Kurt S. Pregitzer, and Donald R. Zak
Stand-level allometry in Pinus taeda as affected by irrigation and fertilization, J. S. King, T. J. Albaugh, H. L. Allen, and L. W. Kress
Electrically and thermally conductive nylon 6,6, Julia A. King, Kenneth W. Tucker, Bryan D. Vogt, Erik H. Weber, and Congling Quan
Transformation mechanism for the pressure-induced phase transition in shocked cds, M. D. Knudson and Y. M. Gupta
Characteristics of residual plastic zone under static and dynamic Vickers indentations, B. J. Koeppel and G. Subhash
Nearshore versus offshore copper loading in Lake Superior sediments: Implications for transport and cycling, Jonathan J. Kolak, David T. Long, W. Charles Kerfoot, Tina M. Beals, and Steven J. Eisenreich
Environmental beneficiation of machining wastes—Part III: Effects of metal working fluids on the spontaneous heating of machining swarf, S. Komar Kawatra and Mathew J. Hess
Fluctuation properties of precipitation. Part III: On the ubiquity and emergence of the exponential drop size spectra, A. B. Kostinski and A. R. Jameson
Atomistic modeling of native point defects in yttrium aluminum garnet crystals, Maija M. Kuklja and Ravindra Pandey
A New Gripping Technique for Small Metal Specimens, D. A. La Van, P. B. Duncan, H. Zeng, and W. N. Sharpe
Cramér–Rao analysis of phase-diverse wave-front sensing, David J. Lee, Michael C. Roggemann, and Byron M. Welsh
Constitutive modeling of textured body-centered-cubic (bcc) polycrystals, Yeong Joo Lee, Ghatu Subhash, and G. Ravichandran
An economic machining process model using fuzzy non-linear programming and neural network, Y. H. Lee, B. H. Yang, and K. S. Moon
Four-phase sphere modeling of effective bulk modulus of concrete, Guoqiang Li, Yi Zhao, and Su Seng Pang
Effective Young's modulus estimation of concrete, Guoqiang Li, Yi Zhao, Su Seng Pang, and Yongqi Li
Formability in non-symmetric aluminium panel drawing using active drawbeads, Rui Li and Klaus J. Weinmann
Search for spatial structures at scales Z ∼ 1. III. The effect of lensing on QSO?, V. F. Litvin, S. A. Matveef, W. E. Pereira, and V. V. Orlov
A Review of: “Inorganic Sytheses, Volume 32”, Rudy Luck
A Review of: “Phthalocyanine Materials Synthesis, Structure and Function”, Rudy L. Luck
In situ copper toxicity tests: Applying likelihood ratio tests to Daphnia pulex incubations in Keweenaw Peninsula waters, Ross D. Lytle
Aging mechanisms in cellulose fiber reinforced cement composites, R. MacVicar, L. M. Matuana, and J. J. Balatinecz
Preliminary assessment of the applicability of image processing for large strain measurement, S. A. Majlessi, F. Unsacar, and A. Shukla
Genotypic variation for condensed tannin production in trembling aspen (Populus tremuloides, Salicaceae) under elevated CO2 and in high- and low-fertility soil, Jennifer L. Mansfield, Peter S. Curtis, Donald R. Zak, and Kurt S. Pregitzer
A secure unrestricted advanced systems laboratory, Jean Mayo and Phil Kearns
The effect of tool flexibility on back-cutting in end milled surfaces, S. N. Melkote, J. W. Sutherland, and C. King
Influence of the grinding wheel in the ductile grinding of brittle materials: Development and verification of kinematic based model, M. H. Miller and T. A. Dow
Demand management: The evaluation of price and due date negotiation strategies using simulation, Douglas R. Moodie
Due date demand management: Negotiating the trade-off between price and delivery, D. R. Moodie and P. M. Bobrowski
Mechanochemically synthesized NbC cermets: Part II. Mechanical properties, B. R. Murphy and T. H. Courtney
Mechanochemically synthesized NbC cermets: Part I. Synthesis and structural development, B. R. Murphy and T. H. Courtney
Preparation of hydrophobic microspheres from low-temperature melting polymeric materials, Jakub Nalaskowski, Jaroslaw Drelich, Jan Hupka, and Jan D. Miller
The nature of the universe debate in 1998, Robert J. Nemiroff and Jerry T. Bonnell
Toward a continuous record of the sky, Robert J. Nemiroff and J. Bruce Rafert
Site occupancy in ternary Ll < inf> 2 ordered alloys as determined by diffraction: Observations on (Al,Cr) < inf> 3 Ti alloys, J. P. Nic and D. E. Mikkola
Electron affinities and [Formula Presented] f values for 11 bound states of [Formula Presented] formed by [Formula Presented] and [Formula Presented] attachment, Steven M. O’Malley and Donald R. Beck
The role of empirical studies in process improvement, L. M. Ott, A. Kinnula, C. Seaman, and C. Wohlin
High frequency fatigue crack propagation behavior of a nickel-base turbine disk alloy, S. A. Padula, A. Shyam, R. O. Ritchie, and W. W. Milligan
Atomistic simulation study of spinel oxides: Zinc aluminate and zinc gallate, Ravindra Pandey, Julian D. Gale, Suresh K. Sampath, and Jose M. Recio
Counter-trends and potential trend conversions in the early twenty-first century, Karol I. Pelc
Application of a reynolds-stress turbulence model to gas turbine combustor calculations, P. F. Penko, K. P. Kundu, and S. L. Yang
Generalizations of the Greenberg-Rascle construction of periodic solutions to quasilinear equations of 1-D elasticity, Robert Peszek
Wolf-moose interaction on Isle Royale: The end of natural regulation, Rolf O. Peterson
The role of flank face interference in improving the accuracy of dynamic force predictions in peripheral milling, S. Ranganath, K. Narayanan, and J. W. Sutherland
Molecular Structure Disassembly Program (MOSDAP): A chemical information model to automate structure-based physical property estimation, John W. Raymond and Tony N. Rogers
Laser guidance and trapping of mesoscale particles in hollow-core optical fibers, Michael J. Renn, Robert Pastel, and Heather J. Lewandowski
STS at Michigan Technological University: A history and profile, Terry S. Reynolds
Chiroptical Spectroscopy, Emission Theory, James P. Riehl
Thresholds for high-cycle fatigue in a turbine engine Ti-6Al-4V alloy, R. O. Ritchie, B. L. Boyce, J. P. Campbell, O. Roder, A. W. Thompson, and W. W. Milligan
The isolation and characterization of right-side-out plasma membrane vesicles from barley aleurone cells, Kim M. Robbins, Narasimhan Bhuvarahamurthy, Gay Pliska-Matyshak, and Pushpalatha P.N. Murthy
Modeling molybdenum carbide-based hydrodesulfurization (HDS) catalysts using carbon-modified Mo(110) surfaces, Charles L. Roe and Kirk H. Schulz
Micro-electro-mechanical deformable mirrors for aberration control in optical systems, Michael C. Roggemann, Victor M. Bright, Byron M. Welsh, William D. Cowan, and Max Lee
Monitoring end-mill wear and predicting tool failure using accelerometers, J. T. Roth and S. M. Pandit
Fastener design for transversely loaded composite plates, D. M. Running, J. B. Ligon, and I. Miskioglu
Inverse kinematic modeling of a coupled flexure hinge mechanism, Jae W. Ryu, Sung Q. Lee, Dae Gab Gweon, and Kee S. Moon
Hollywood’s transnational appeal: Hegemony and democratic potential?, M. Mehdi Semati and Patty J. Sotirin
Structural fatigue in spinel electrodes in Li/Li < inf> x [Mn < inf> 2 ]O < inf> 4 cells, Y. Shao-Horn, S. A. Hackney, A. J. Kahaian, K. D. Kepler, E. Skinner, J. T. Vaughey, and M. M. Thackeray
Modeling surface texture in the peripheral milling process using neural network, spline, and fractal methods with evidence of chaos, G. A. Stark and K. S. Moon
Dynamic indentation hardness and rate sensitivity in metals, G. Subhash, B. J. Koeppel, and A. Chandra
Identification and dissociation in rhetorical exposé: An analysis of St. Irenaeus’Against Heresies, Dale Sullivan
Removal and destruction of organic contaminants in water using adsorption, steam regeneration, and photocatalytic oxidation: A pilot-scale study, Rominder P.S. Suri, Junbiao Liu, John C. Crittenden, and David W. Hand
Reconstructing Powder NQR Images with Real Gradient Coils, Srirama V. Swaminathan and B H. Suits
Stabilization of insertion electrodes for lithium batteries, M. M. Thackeray, C. S. Johnson, A. J. Kahaian, K. D. Kepler, J. T. Vaughey, Y. Shao-Horn, and S. A. Hackney
Addition of sulfur to organic matter during early diagenesis of lake sediments, N. R. Urban, K. Ernst, and S. Bernasconi
Development of a laboratory screening test for asphalt pavement crack sealants, Thomas J. Van Dam, Scott Reay, Marcy Appleyard, and Michael J. Eacker
Determination of the influence of wind on the Keweenaw Current in the Lake Superior basin as identified by Advanced Very High Resolution Radiometer (AVHRR) imagery, Diane M. Van Luven, Jacqueline E. Huntoon, and Ann L. Maclean
Automated soil particle-size analysis using X-ray absorption, Stanley J. Vitton, Nicole L. Ott, and Michael A. Lehman
Cross-cultural Work Group, Christa Walck
High cycle fatigue behaviour of Ti-47Al-2Cr-2Nb and Ti-6242S with (Al,Cr) < inf> 3 Ti plasma spray protective coating, T. D. Wood, D. K. Dewald, and D. E. Mikkola
Consolidation and high strain rate mechanical behavior of nanocrystalline tantalum powder, Sang H. Yoo, T. S. Sudarshan, Krupa Sethuram, Ghatu Subhash, and R. J. Dowding
Dynamic compression behaviour of tungsten powders consolidated by plasma pressure compaction, S. H. Yoo, T. S. Sudarshan, K. Sethuram, G. Subhash, and R. J. Dowding