Preparation of hydrophobic microspheres from low-temperature melting polymeric materials

Document Type

Article

Publication Date

1-1-1999

Abstract

A novel procedure for the preparation of hydrophobic spherical particles from thermoplastic materials, such as polyethylene (PE) or fossil resin (FR), is presented. These particles are particularly useful in the determination of surface forces with the atomic force microscope usingthe colloidal probe technique. The preparation steps include (i) suspending powdered polymer (PE and FR) in glycerol, (ii) heating the suspension above the melting point of the polymer, (iii) solidification of dispersed PE/FR droplets at a reduced temperature, (iv) filtration of the particles, and (v) washing/drying of the product. Such produced particles of PE and FR had a broad size distribution (2-50 μm) and a spherical shape. The surfaces of these particles were relatively smooth, with a small number of asperities, and/or attached satellite particles or non-spherical debris.Analytical examination of the polymer surface, before and after treatment with hot glycerol, by SEM, AFM, contact angle, XPS, and FTIR measurements revealed only slight chemical changes on the surface caused by this treatment, which included a decrease in the hydrophobicity of the polymersurface caused by an increased amount of oxygen-containing polar groups. These changes were greatly diminished after drying, and the hydrophobicity of the PE and FR surfaces was, at least partially, restored. © 1999 Taylor & Francis Group, LLC.

Publication Title

Journal of Adhesion Science and Technology

Link to Full Text

Share

COinS