Explore our collection of dissertations, master's theses and master's reports from the Department of Mechanical and Aerospace Engineering below.
Theses/Dissertations/Reports from 2015
PHYSICS-BASED MODELING AND CONTROL OF POWERTRAIN SYSTEMS INTEGRATED WITH LOW TEMPERATURE COMBUSTION ENGINES, Mehran Bidarvatan
SEGMENTATION OF PROTON EXCHANGE MEMBRANE FUEL CELL IN THE LAND-CHANNEL DIRECTION, Udit N. Shrivastava
SPACECRAFT ATTITUDE CONTROL USING MAGNETIC ACTUATORS, Karthik Mysore Srinivasa
SPRAY AND COMBUSTION CHARACTERISTICS OF DIMETHYL ETHER UNDER VARIOUS AMBIENT CONDITIONS: AN EXPERIMENTAL AND MODELING STUDY, Khanh D. Cung
STRUCTURAL ANALYSIS OF INTEGRATION OF A NON-CYLINDRICAL CNG FUEL TANK, Prathamesh Prashant Deshpande
Reports/Theses/Dissertations from 2014
A BACKING DEVICE BASED ON AN EMBEDDED STIFFENER AND RETRACTABLE INSERTION TOOL FOR THIN-FILM COCHLEAR ARRAYS, Radheshyam Tewari
AN ASSESSMENT OF FLOW REGIME MAPS AND A NUMERICAL HEAT TRANSFER CORRELATION FOR THE STRATIFIED/ANNULAR REGIME OF SHEAR-DRIVEN INTERNAL CONDENSING FLOWS, FNU Nikhil Shankar
AN EXPERIMENTAL STUDY OF PARTIAL LOW RISK DEPLOYMENT IN A FIXED VEHICLE ENVIRONMENT, Charles A. Clement
AN INVESTIGATION OF VARIABLE VALVE TIMING EFFECTS ON HCCI ENGINE PERFORMANCE, Hrishikesh Abhay Saigaonkar
A Study of Acoustic Boom Generation Due to Vibro-Acoustic Coupling in Passenger Cars, Mayuresh Pathak
A Study of Passenger Car Acoustic Cavity Boom Simulation Methods, Shreerang Dhabe
AUTONOMOUS POWER DISTRIBUTION SYSTEMS, Barzin Moridian
DENSITY OF AMORPHOUS CARBON BY USING DENSITY FUNCTIONAL THEORY, Sorayot Chinkanjanarot
DEVELOPMENT OF AN IONIC LIQUID FERROFLUID ELECTROSPRAY SOURCE AND MODE SHAPE STUDIES OF A FERROFLUID IN A NON-UNIFORM MAGNETIC FIELD, Edmond Joseph Meyer IV
DEVELOPMENT OF CONFOCAL IMAGING TECHNIQUES FOR PROBING INTERFACIAL DYNAMICS IN MICROSCALE, GAS-LIQUID, TWO-PHASE FLOW, Joseph E. Hernandez
DEVELOPMENT OF CONFORMABLE CNG TANK FOR AUTOMOTIVE APPLICATION, Sachin P. Shinde
EFFECT OF FUEL SPRAY IMPINGMENT ON ENGINE PERFORMANCE IN A GASOLINE TURBOCHARGED DIRECT INJECTION (GTDI) ENGINE, Anshaj Chadha
ENGINE TESTS WITH - IMAGING OF "NOSTRUM IMPINGING JET INJECTORS” AND RESULTS OF DIRECT WATER INJECTION IN A SPARK IGNITED ENGINE AT HIGH COMPRESSION RATIO, Yogesh P. Kanabar
EXPERIMENTAL SETUP AND CONTROLLER DESIGN FOR AN HCCI ENGINE, Deepak Kothari
FABRICATION OF DRUG ELUTING TI IMPLANTS FOR DENTAL/ORTHOPEDIC APPLICATIONS, Azhang Hamlekhan
IMPACT OF CAM SPLAY ANGLE IN A SPARK IGNITED ENGINE WITH VARIABLE VALVE TIMING, Zhuyong Yang
IMPACT OF ENGINE CALIBRATION ON PM OXIDATION IN A CATALYZED PARTICULATE FILTER OVER A TRANSIENT CYCLE: A MODELLING STUDY, Ajinkya A. Gujar
IMPROVING STARTABILITY AND REDUCING EMISSIONS IN FLEXFUEL SPARK IGNITION DIRECT INJECTION VARIABLE CAM TIMING ENGINE, Vaibhav S. Kale
IN-SITU TEM PLASMA CHIP NANOFABRICATION AND CHARACTERIZATION, Xuebo Cui
INTEGRATION OF GT-POWER ENGINE MODEL WITH DSPACE VEHICLE MODEL FOR CO-SIMULATION AND VALIDATION, Pankaj Prabhakar Badgujar
MEASURING HEAD IMPACT CONTACT PRESSURE IN COLLEGIATE FOOTBALL GAMES TO CORRELATE HEAD KINEMATICS TO BRAIN KINETICS ELUCIDATING BRAIN INJURY DYNAMICS, Chandrika S. Abhang
MICROFLUIDIC ENCAPSULATION FOR SELF-HEALING MATERIAL AND INVESTIGATION OF ITS IMPACTS ON COMPOSITE PERFORMANCE, Ryan J. Lemmens
MILITARY VEHICLE OPTIMIZATION AND CONTROL, Denise M. Rizzo
MODELING AND EXPERIMENTAL SETUP OF AN HCCI ENGINE, Vishal Shailesh Thakkar
MODELING OF TRANSFER PATH FOR DETERMINATION OF COMBUSTION AND NOISE METRICS ON DIESEL ENGINES, Libin Jia
OPTIMAL CONTROL OF BUILDING ENERGY WITH SMART-GRID INTERACTION, Madhura Paranjape
Predicting the Mechanical Properties of Carbon-Based Materials Using Molecular Dynamics, Benjamin D. Jensen
RAPID SPACE TRAJECTORY GENERATION USING A FOURIER SERIES SHAPE-BASED APPROACH, Ehsan Taheri
Reconciling Function- and Affordance-Based Design, Benjamin T. Ciavola
SELF-ADAPTIVE THERMAL MANAGEMENT - THE FUNDAMENTALS AND APPLICATIONS IN LI-POLYMER BATTERIES, Xiaobao Geng
SIZE OPTIMIZATION OF A BIOMASS TO LIQUID FUEL CONVERSION FACILITY WITHIN A BIOMASS SUPPLY CHAIN, Timothy L. Jenkins
STUDY OF REAL-TIME STOCHASTIC KNOCK DETECTION AND CONTROL FOR SPARK-IGNITION ENGINES, Wei Luo
TEST-ANALYSIS MODEL CORRELATION AND CALIBRATION OF A MULTI-COMPONENT PLASTIC PART, Steven P. Carter
THE EFFECT OF SOLID DEPOSIT FORMATIONS ON SI PFI ENGINE PERFORMANCE AND CONTROL, Henry John Schmidt VII
Thickness measurement of dynamic thin liquid films generated by plug-annular flow in non-wetting microchannels, David C. Deisenroth
UNDERSTANDING CHASSIS INPUTS FROM THE REAR SUSPENSION OF A SNOWMOBILE, Jamie L. Kleinendorst
USE OF AN ELECTRICAL IMPEDANCE TOMOGRAPHY METHOD TO DETECT AND TRACK FRACTURES IN A GELATIN MEDIUM, Evan G. Lucas
WATER ACCESS AND MAINTENANCE IN KARONGA, MALAWI, Donald A. Norris
WATER TRANSPORT THROUGH POROUS MEDIA AND IN FLOW CHANNELS OF PROTON EXCHANGE MEMBRANE FUEL CELL, Mehdi Mortazavi
Reports/Theses/Dissertations from 2013
AGENT BASED, DISTRIBUTED CONTROL STRATEGIES AND OPTIMIZATION OF PLUG-IN ELECTRIC VEHICLES ON SMART/MICROGRID ARCHITECTURES, Kyle Bordeau
Analysis of a Non-Traditional Micro Tube Hydroforming Process, Scott W. Wagner
ANKLE IMPEDANCE AND ANKLE ANGLES DURING STEP TURN AND STRAIGHT WALK: IMPLICATIONS FOR THE DESIGN OF A STEERABLE ANKLE-FOOT PROSTHETIC ROBOT, Evandro M. Ficanha
A SCR Model based on Reactor and Engine Experimental Studies for a Cu-zeolite Catalyst, Xiaobo Song
Characterization Of Porous Media In Proton Exchange Membrane Fuel Cell Based on Percolation Studies, Stephen Stacy
CO-ELECTROPHORETIC DEPOSITION OF LIQUID METAL AND SILICON FOR LITHIUM-ION BATTERY APPLICATION, Hanfei Zhang
COMPARATIVE ANALYSIS OF EFFICIENCY AND OPERATING CHARACTERISTICS OF AUTOMOTIVE POWERTRAIN ARCHITECTURES THROUGH CHASSIS DYNAMOMETER TESTING, Jeremy J. Anderson
DEVELOPMENT OF A LOW COST IMPEDANCE TUBE TO MEASURE THE ACOUSTIC ABSORPTION AND TRANSMISSION LOSS OF MATERIALS, Satyajeet P. Deshpande
Development of an In Situ Measurement Device for Obtaining Material Thermal Properties, Mark A. Hepokoski
Development of Hardware-In-the-Loop Simulation System for Hybrid Electric Vehicle Study, Yang Li
DEVELOPMENT OF THE ECOCAR 3 PROPOSAL AND GUIDELINES FOR MODELING AND DESIGN IN YEAR ONE OF ECOCAR 3, Tyler B. Daavettila
Driver Safety in Far-side and Far-oblique Crashes: A Study of Patrol Vehicles in the United States of America, Martin Sepoori
DYNAMIC MODEL BASED STATE ESTIMATION IN A HEAVY DUTY DIESEL AFTERTREATMENT SYSTEM FOR ONBOARD DIAGNOSTICS AND CONTROLS, Harsha S. Surenahalli
EXPERIMENTAL INVESTIGATION INTO PARTICULATE MATTER DISTRIBUTION IN CATALYZED PARTICULATE FILTERS USING A 3D TERAHERTZ WAVE SCANNER, Ryan Kristopher Foley
HIGH VOLTAGE ELECTROPHORETIC DEPOSITION FOR ELECTROCHEMICAL ENERGY STORAGE AND OTHER APPLICATIONS, Sunand Santhanagopalan
Influence of Mechanical and Thermal Boundary Conditions on Stabilizing/Destabilizing Mechanisms in Evaporating Liquid Films, Aneet Dharmavaram Narendranath
INTERACTIVE EFFECT OF FIXED TIME ORDER STRATEGIES WITHIN A SUPPLY CHAIN ON ACTUAL IN-STOCK PROBABILITIES, Mangesh S. Chaudhari
LATTICE BOLTZMANN METHOD AND CELLULAR AUTOMATA SIMULATION OF PARTICLE MOTION AND DEPOSITION IN 2-D CASE, Yichao Deng
MODEL-BASED DESIGN AND HARDWARE-IN-THE-LOOP SIMULATION OF INTERNAL COMBUSTION ENGINE CONTROL SYSTEMS, Pushkar Vivek Agashe
MODELING AND HARDWARE-IN-THE-LOOP SIMULATION OF POWER-SPLIT HYBRID ELECTRIC VEHICLES, Shreyash Joshi
Molecular Modeling of PMR-15 Polyimide, FNU Pruthul Kokkada Ravindranath
MULTISCALE MODELING OF LIQUID CRYSTALLINE/NANOTUBE COMPOSITES, Sharil Patrale
NANOSCALE ELECTROCHEMISTRY BY IN-SITU TRANSMISSION ELECTRON MICROSCOPY, Qi Gao
Non-invasive method to predict viscosity and size using total internal reflection fluorescence microscopy (TIRFM) system, Mohammad Mohiuddin Mamun
Novel Automotive Waste Heat Recovery Techniques, John Randall Armstead
REALIZATION OF A DC MICROGRID USING A HAMILTONIAN BASED CONTROLS SOLUTION, Matthew J. Heath
Reverse Engineering the Structural and Acoustic Behavior of a Stradivari Violin, Michael A. Pyrkosz
SIMULATING LARGE DEFORMATION OF INTRANEURAL GANGLION CYST USING FINITE ELEMENT METHOD, Sachin Lokhande
STUDY OF HYBRID ELECTRIC VEHICLE BATTERY MODELING AND CONTROL USING AUTONOMIE, Baifan Wu
THERMAL CHARACTERIZATION OF A GASOLINE TURBOCHARGED DIRECT INJECTION (GTDI) ENGINE UTILIZING LEAN OPERATION AND EXHAUST GAS RECIRCULATION (EGR), Daniel P. Madison
THE SETUP AND EXPERIMENTAL RESULTS OF DIRECT WATER INJECTION IN A SPARK IGNITED NATURAL GAS ENGINE AT VARYING COMPRESSION RATIOS, Jason E. Socha
Two-Phase Flow In Microchannels: Morphology And Interface Phenomena, Alexandru Herescu
Reports/Theses/Dissertations from 2012
Algorithms for spacecraft formation flying navigation based on wireless positioning system measurements, Shu Ting Goh
Analysis of a novel waste heat recovery mechanism for an I.C. engine, Jasdeep S. Condle
Automated optimization of polymer extrusion dies using finite element analysis, James Allen Peitzmeier
Cold-Start Emissions testing of Snowmobiles Using Ethanol and Gasoline, Michael David Rittenour
Computational fluids domain reduction to a simplified fluid network, Robert E. Smith
Conversion of a Micro, Glow-Ignition, Two-Stroke Engine from Nitromethane-Methanol Blend Fuel to Military Jet Propellant (JP-8), Andrew L. Wiegand
Cylinder wall waste heat recovery from liquid-cooled internal combustion engines utilizing thermoelectric generators, John Randall Armstead
DESIGN AND FABRICATION OF RESONANT GAS SENSOR FOR HIGH SENSITIVITY IN THE PRESENCE OF AIR DAMPING, Chengzhang Li
DEVELOPMENT OF A PREDICTIVE COMBUSTION MODEL OF A SPARK IGNITED ENGINE WITH GASOLINE DIRECT INJECTION, VARIABLE VALVE TIMING, DURATION AND LIFT TECHNOLOGIES, Dustin P. Loveland
Development of one-dimensional and two-dimensional computational tools that simulate steady internal condensing flows in terrestrial and zero-gravity environments, Soumya Asimkumar Mitra
Direct Write Fabrication of Waveguides and Interconnects for Optical Printed Wiring Boards, Joseph Carl Dingeldein
EFFECT OF ELECTRICAL DISCHARGE PATTERN ON SPARK IGNITED FLAME KERNEL DEVELOPMENT, Anqi Zhang
EXHAUST EMISSIONS OF LOW LEVEL BLEND ALCOHOL FUELS FROM TWO-STROKE AND FOUR-STROKE MARINE ENGINES, James Michael Sevik
Finite element analysis of 2-D representative volume element, Mandar Kulkarni