Mechanics of tool-workplece engagement and incipient deformation in machining of 70/30 brass
Document Type
Article
Publication Date
1-1-1971
Abstract
In this paper, studies of incipient chip formation when cutting annealed 70/30 brass tender orthogonal conditions are presented. Cutting forces were recorded and changes in deformation occurring in the workpiece were investigated for slow velocity transient cuts involving different rake angles. The deformation was observed by means of microhardness plots and recrystallization photomicrographs. Stresses on the apparent toolwork contact area were calculated. © 1971 ASME.
Publication Title
Journal of Manufacturing Science and Engineering, Transactions of the ASME
Recommended Citation
Weinmann, K.,
&
von Turkovich, B.
(1971).
Mechanics of tool-workplece engagement and incipient deformation in machining of 70/30 brass.
Journal of Manufacturing Science and Engineering, Transactions of the ASME,
93(4), 1079-1089.
http://doi.org/10.1115/1.3428046
Retrieved from: https://digitalcommons.mtu.edu/michigantech-p/11663