Works from 2022
The Development of a Machine for Macroscale Friction Stir Processing: A Work in Progress, William J. Emblom, Ayotunde Olayinka, Jared Marcel, Joshua Ferrara, Scott M. DePaula, Maria Fernanda Espinosa-Perez, and Scott W. Wagner
VISUAL STUDY OF THE FREEZING PROCESS OF A WATER DROPLET ON A HORIZONTAL COPPER PLATE, Jin Jin Tian, Xudong Gu, Shengnan Lv, Zhe Zhang, Sunil S. Mehendale, and Xingbo Li
Research on the Phase Transition Process of Sessile Droplet on Carbon Fiber Cold Surface, Zhe Zhang, Huiqing Shang, Sunil S. Mehendale, Yuanlu Lang, Jianan Chen, and Jinjin Tian
Experimental Study on the Performance of a Solar Heat Pump System, Z. Zhang, Y. L. Lang, S. Mehendale, C. Y. Zhang, Y. Chen, and J. J. Tian
Works from 2021
Frequency domain measurements of melt pool recoil force using modal analysis, Tristan Cullom, Cody Lough, Nicholas Altese, Douglas Bristow, Robert Landers, Ben Brown, Troy Hartwig, Andrew Barnard, Jason Blough, Kevin Johnson, and Edward Kinzel
Friction stir forward extrusion: Small scale tooling development and preliminary test results, William J. Emblom, Dillon J. Huval, Dylan J. Oustalet, Jacob Rubi, Ayotunde Olayinka, Scott W. Wagner, and Muhammad A. Wahab
S-STEM Student Reflections and IDP Process, Laura Kasson Fiss, John L. Irwin, and Yin Yin Tan
Impact of Online Worksheets Versus In-class Printed Worksheets on Students’ Learning Outcomes and Content Mastery, Paniz Khanmohammadi Hazaveh and Linda Wanless
Teaching Design Engineering Technology: Experiential Learning Activities, John L. Irwin
Preparation of MET Students for the NCEES FE Exam: Lessons Learned, Kevin Johnson and John L. Irwin
Tailoring microstructure of wire arc additively manufactured C–Mn–Si steel with post process heat treatment, M. Shamsujjoha, J. Licavoli, B. Lin, E. Harma, R. Patterson, T. Timmermann, M. Groeneveld, L. McLeod, and P. Sanders
The influence of header design on two-phase flow distribution in plate-fin heat exchangers, Zhe Zhang, Sunil S. Mehendale, Shengnan Lv, Hui Yuan, and Jin Jin Tian
Works from 2020
What is the Future of Engineering Technology?, Patricia Fox, Brandon Sorge, Martin E. Gordon, Scott Danielson, Ronald Land, I. Richmond Nettey, John L. Irwin, and et. al.
FEA Taught the Industry Way, John L. Irwin and David Michael Labyak
Pioneering approach for offering the convergence MS degree in mechatronics and associate graduate certificate, Aleksandr Sergeyev, Adrienne Minerick, and John L. Irwin
Extending complex conjugate control to nonlinear wave energy converters, David G. Wilson, Rush D. Robinett III, Giorgio Bacelli, Ossama Abdelkhalik, and Ryan Coe
Works from 2019
Board 3: Engineering technology scholars-IMProving retention and student success (ETS-IMPRESS): First year progress report, Nasser Alaraje, Lorelle A. Meadows, Laura Fiss, Susan L. Amato-Henderson, Guy Hembroff, Aleksandr Sergeyev, Kellie H. Raffaelli, and John L. Irwin
Developing an open source, inexpensive, large-scale polar configuration 3D printer, Sourabh Prashant Deshpande, Shrinivas Kulkarni, Sid Shah, and J. L. Irwin
The Development of a microscale tube hydroforming test bed and novel sealing system: A work in progress, William J. Emblom, Ayotunde Olayinka, and Scott W. Wagner
Works from 2018
Simulations and Manipulatives used to Better Understand Graphics, Statics & Dynamics Concepts, John L. Irwin and Sunil S. Mehendale
A New Heat Transfer Coefficient Correlation for Condensing Flows of Pure Refrigerants and Refrigerant Mixtures within Horizontal Microfin Tubes, Sunil Mehendale, Sampath Boyapally, and Joy Pandya
A new correlation for predicting the heat transfer coefficients of R407C undergoing flow boiling within horizontal microfin tubes, Sunil S. Mehendale
A new heat transfer coefficient correlation for pure refrigerants and near-azeotropic refrigerant mixtures flow boiling within horizontal microfin tubes, Sunil S. Mehendale
Single-phase heat exchangers, Sunil S. Mehendale
Works from 2017
3D printing implications for STEM education, John L. Irwin
Works from 2016
Hybrid polymer additive manufacturing of a darrieus type vertical axis wind turbine design to improve power generation efficiency, Sourabh Deshpande, Nithin Rao, Nitin Pradhan, and John L. Irwin
Works from 2015
Case study using open source additive manufacturing (AM) technology for improved part function, Pranit Vijay Kasture, Prasad Deole, and John L. Irwin
An Interactive Dynamics Learning Course, Sunil S. Mehendale, John L. Irwin, and Robert A. Marlor
Works from 2014
The RepRap 3-D Printer Revolution in STEM Education, John L. Irwin, Joshua M. Pearce, Gerald C. Anzalone, and Douglas Oppliger
Works from 2013
Wind Turbine Blade CAD Models used as Scaffolding Technique to Teach Design Engineers, John L. Irwin
Works from 2011
A study on the structure-piezoresponse property of a ZnO nanobelt by in situ transmission rlectron microscopy, Anjana Asthana, Kasra Momeni, Abhishek Prasad, Yoke Khin Yap, and Reza Shahbazian-Yassar
Works from 2007
Directionality based preventive protocol for mobile ad hoc networks, Hetal Jasani, Yu Cai, and Kang Yen
Works from 1988
An analysis for the effect of a grain size gradient on torsional and tensile properties, J. K. Lee, F. R. Ehrlich, L. A. Crall, and T. H. Collins