Design of Recycled Aluminium (AA 7075+AA1050 Fine Chips)-Based Composites Reinforced with Nano-SiC Whiskers, Fine Carbon Fiber for Aeronautical Applications
Document Type
Book Chapter
Publication Date
2023
Department
Department of Mechanical Engineering-Engineering Mechanics
Abstract
In the frame of the research project that is going on, the mechanical properties of recycled gas atomized scrap aluminium (AA7075) based hybrid composites reinforced with nano SiC filler (whisker)+ Graphene Nano plateless (GNP) and fine carbon Fibers elements have been evaluated. Firstly, the mixture was homogenized by means of ball milling process during 4 hours. After hot compaction at 200°C compaction of the compositions the final specimens have been produced with the novel combined method called “SINTER+FORGING” at 650°C followed by relaxation treatment at 200°C during the 2 hours. This type of hybrid composite is used for aeronautical applications. Static and dynamic-Time dependent compression tests have been conducted. Interface and microstructure of these composites have also been evaluated by Scanning Electron Microscope (SEM).
Publication Title
Nanofillers for Sustainable Applications
ISBN
9781003808060,9781032510798
Recommended Citation
Aslan, Ö.,
Klinkova, O.,
Katundi, D.,
Miskioglu, I.,
&
Bayraktar, E.
(2023).
Design of Recycled Aluminium (AA 7075+AA1050 Fine Chips)-Based Composites Reinforced with Nano-SiC Whiskers, Fine Carbon Fiber for Aeronautical Applications.
Nanofillers for Sustainable Applications, 319-328.
http://doi.org/10.1201/9781003400998-17
Retrieved from: https://digitalcommons.mtu.edu/michigantech-p2/499