The potential for fencing to be used as low-cost solar photovoltaic racking

Document Type

Article

Publication Date

3-15-2023

Department

Department of Mechanical Engineering-Engineering Mechanics; Department of Civil, Environmental, and Geospatial Engineering

Abstract

Popular agrivoltaic systems use photovoltaic (PV) farms for pasture grazing animals. In general, these agrivoltaic systems do not reduce the capital cost of a PV farm and in some cases can increase it. To overcome this challenge this study investigates the potential for retrofitting existing animal fencing on farms to have dual use for vertical-mounted monofacial PV racking. Specifically, this study catalogs types of fences and wind load calculations classified under Risk Category I are run through a new python-based Open Source Wind Load Calculator to determine the viability of fence-based racking throughout the U.S. The base shear force for all the fences are calculated for a range of wind loads from 80mph to 150mph (129 km/h to 241 km/h) and the results are mapped to indicate the number of PV modules between the vertical fence poles a fence can tolerate in a specific location. The results show the required fence type including post and battens in a given area for sheep, goats, pigs, cows, and alpaca to be used for agrivoltaics. Overall, at least one PV module between posts is acceptable indicating a new agrivoltaic system potential that as little as $0.035/kWh for racking on existing fencing. Although the yield for a vertical PV can range from 20 to 76 % of an optimized tilt angle depending on azimuth, the racking cost savings enable fence-retrofit agrivoltaics to often produce lower levelized cost electricity. Future work is necessary to determine the full scope of benefits of vertical PV agricultural fencing on a global scale.

Publication Title

Solar Energy

Link to Full Text

Share

COinS