Dynamic indentation response of ZrHf-based bulk metallic glasses

Document Type

Article

Publication Date

2-1-2007

Abstract

Static and dynamic Vickers indentations were performed on ZrHf-based bulk amorphous alloys. A decrease in indentation hardness was observed at higher strain rates compared with static indentation hardness. For equivalent loads, dynamic indentations produced more severe deformation features on the loading surface than static indentations. Using bonded interface technique, the induced shear band patterns beneath the indentations were studied. In static indentations, the majority of the deformation was primarily accommodated by closely spaced semicircular shear bands surrounding the indentation. In dynamic indentations two sets of widely spaced semicircular shear bands with two different curvatures were observed. The observed shear band patterns and softening in hardness were rationalized based on the variations in the confinement pressure, strain rate, and temperature within the indentation region during dynamic indentations. It is also proposed that free volume migration and formation of nano-voids leading to cracking are favored due to adiabatic heating and consequently cause the observed softening at high strain rates. © 2007 Materials Research Society.

Publication Title

Journal of Materials Research

Link to Full Text

Share

COinS