Integrated experimental and numerical study on flexural properties of cross laminated timber made of low-value sugar maple lumber

Document Type


Publication Date



Department of Civil, Environmental, and Geospatial Engineering; College of Forest Resources and Environmental Science


The objective of this study is to examine the mechanical performance of cross laminated timber (CLT) panels made of low-value sugar maple under out of plane loads through mechanical tests and numerical simulation. The laminations were sorted into High and Low classes based on the measured modulus of elasticity (MOE). Two 3-layer sugar maple CLT layups as High-Low-High and Low-High-Low glued with resorcinol-based adhesive and one CLT layup of High-Low-High glued with melamine-based adhesive were prepared. Block shear, long-span bending (span-to-depth ratio of 33:1) and short-span bending (5.5:1) tests were conducted to evaluate the bonding, flexural and shear behavior of these low-value sugar maple CLTs. With a limited sample size, the lab-manufactured low-value sugar maple CLT provided a 50% to 80% higher MOE and at least two times higher MOR than CLT type E1 from APA/PRG 320. Similar MOE and MOR improvements were found by comparing CLT made with other species from literatures. The finite element simulation of bending tests was conducted with the orthogonal constitutive law and the progressive damage model based on the calibrated material properties parameters from lumber rating and references. The simulation results on each CLT panel type have a reasonable comparison with experimental test data. Therefore, these integrated experiment and simulation methods can provide detailed mechanical behaviors of the low-value sugar maple CLT, which can also be applied to other CLT species and layup.

Publisher's Statement

© 2021 Elsevier Ltd. Publisher’s version of record:

Publication Title

Construction and Building Materials