Effect of Cooling Rate on W-Phase Formation in Al-Cu-Sc Alloys, Austin DePottey, Lu Jiang, Thomas Dorin, Thomas D. Wood, Timothy Langan, Paul G. Sanders
Michigan Tech Publications

High-temperature deformation of supersaturated Al-Sc-Zr produced via melt-spinning and extrusion, Yang Yang, Stephan A. Hackney, Paul G. Sanders
Michigan Tech Publications

Utilization of Bayesian Optimization and KWN Modeling for Increased Efficiency of Al‐Sc Precipitation Strengthening, Kyle Deane, Yang Yang, Joseph Licavoli, Vu Nguyen, Santu Rana, Sunil Gupta, Svetha Venkatesh, Paul G. Sanders
Michigan Tech Publications

Influence of Core Variables on Aluminum Casting Dimensions in Semi-permanent Molds, Russell E. Stein, Travis Bodick, Randall W. Oehrlein, Paul G. Sanders
Michigan Tech Publications

Open source arc analyzer: Multi-sensor monitoring of wire arc additive manufacturing, Adam M. Pringle, Shane Oberloier, Aliaksei Petsiuk, Paul G. Sanders, Joshua M. Pearce
Michigan Tech Publications

Improved strengthening in supersaturated Al-Sc-Zr alloy via melt-spinning and extrusion, Yang Yang, Joseph J. Licavoli, Paul G. Sanders
Michigan Tech Publications

Effect of dislocations, Al3(Sc,Zr) distribution and ageing temperature on θ′ precipitation in Al-Cu-(Sc)-(Zr) alloys, Baptiste Rouxel, Mahendra Ramajayam, Timothy J. Langan, Justin Lamb, Paul G. Sanders, Thomas Dorin
Michigan Tech Publications

Effect of Cobalt Additions on the Microstructure and Mechanical Properties of As-Cast Thin-Wall Ductile Iron, Alejandra Almanza, Dale Dewald, Joseph Licavoli, Paul G. Sanders
Michigan Tech Publications

Effect of scandium on cast iron microstructure, Mason Coy, Katherine Russell, Erin Heidelberger, Paul G. Sanders, Timothy Langan
Michigan Tech Publications

Precipitation hardening via chemically ordered L1₂ precipitates in Al-Sc-Zr Alloys - New insights using combined STEM and EDS study, Yang Yang, Amlan Mukherjee, Paul G. Sanders
Michigan Tech Publications

Effect of Mg content on Al3Sc-dispersoid formation in cast billets of Al-Mg-Sc alloys, Carson Williams, Thomas D. Wood, Paul G. Sanders, Timothy Langan
Michigan Tech Publications

Heat treatments for precipitation of scandium-containing dispersoids in an Si-containing aluminum alloys, Timothy Langan, Mahendra Ramjayam, Paul G. Sanders, Thomas D. Wood, Thomas Dorin
Department of Materials Science and Engineering Publications

Precipitation hardening of supersaturated Al–Sc–Zr produced via melt-spinning, Yang Yang, Paul G. Sanders
Department of Materials Science and Engineering Publications

ICME applied in the undergraduate capstone senior design sequence, Paul G. Sanders
Department of Materials Science and Engineering Publications

Investigation of Al-Zn-Zr and Al-Zn-Ni alloys for high electrical conductivity and strength application, Oladeji Fadayomi, Rachel Clark, Violet Thole, Paul G. Sanders, Gregory M. Odegard
Paul Sanders

Investigation of Al-Zn-Zr and Al-Zn-Ni alloys for high electrical conductivity and strength application, Oladeji Fadayomi, Rachel Clark, Violet Thole, Paul G. Sanders, Gregory M. Odegard
Department of Materials Science and Engineering Publications

Applications of open source GMAW-based metal 3-D printing, Yuenyong Nilsiam, Paul G. Sanders, Joshua M. Pearce
Joshua M. Pearce

Applications of open source GMAW-based metal 3-D printing, Yuenyong Nilsiam, Paul G. Sanders, Joshua M. Pearce
Paul Sanders

The natural aging effect on hardenability in Al-Mg-Si: A complex interaction between composition and heat treatment parameters, Alex Poznak, Violet Thole, Paul G. Sanders
Michigan Tech Publications

Effect of Zr additions on thermal stability of Al-Cu precipitates in as-cast and cold worked samples, Kyle Deane, Paul G. Sanders
Michigan Tech Publications

Applications of open source GMAW-based metal 3-D printing, Yuenyong Nilsiam, Paul G. Sanders, Joshua M. Pearce
Department of Materials Science and Engineering Publications

Hypoeutectic aluminum–silicon alloy development for GMAW-based 3-D printing using wedge castings, Amberlee S. Haselhuhn, Paul G. Sanders, Joshua M. Pearce
Joshua M. Pearce

Low-cost open-source voltage and current monitor for gas metal arc weld 3D printing, Anthony Pinar, Bas Wijnen, Gerald C. Anzalone, Timothy C. Havens, Paul G. Sanders, Joshua M. Pearce
Joshua M. Pearce

Substrate release mechanisms for gas metal arc weld 3D aluminum metal printing, Amberlee S. Haselhuhn, Eli J. Gooding, Alexandra G. Glover, Gerald C. Anzalone, Bas Wijnen, Paul G. Sanders, Joshua M. Pearce
Joshua M. Pearce

Integrated voltage—current monitoring and control of gas metal arc weld magnetic ball-jointed open source 3-D printer, Yuenyong Nilsiam, Amberlee S. Haselhuhn, Bas Wijnen, Paul G. Sanders, Joshua M. Pearce
Joshua M. Pearce

Free and open-source control software for 3-D motion and processing, Bas Wijnen, G. C. Anzalone, Amberlee S. Haselhuhn, Paul G. Sanders, Joshua M. Pearce
Joshua M. Pearce

A low-cost open-source metal 3-D printer, Gerald C. Anzalone, Chenlong Zhang, Bas Wijnen, Paul G. Sanders, Joshua M. Pearce
Joshua M. Pearce

Structure-property relationships of common aluminum weld alloys utilized as feedstock for GMAW-based 3-D metal printing, Amberlee S. Haselhuhn, Michael W. Buhr, Bas Wijnen, Paul G. Sanders, Joshua M. Pearce
Joshua M. Pearce

Hypoeutectic aluminum–silicon alloy development for GMAW-based 3-D printing using wedge castings, Amberlee S. Haselhuhn, Paul G. Sanders, Joshua M. Pearce
Department of Materials Science and Engineering Publications

Rapid metal design, Paul G. Sanders
TechTalks

Structure-property relationships of common aluminum weld alloys utilized as feedstock for GMAW-based 3-D metal printing, Amberlee S. Haselhuhn, Michael W. Buhr, Bas Wijnen, Paul G. Sanders, Joshua M. Pearce
Department of Materials Science and Engineering Publications

Solute-derived thermal stabilization of nano-sized grains in melt-spun aluminum, Andrew H. Baker, Paul G. Sanders, E. A. Lass, Deepak Kapoor, S. L. Kampe
Department of Materials Science and Engineering Publications

Cascade Bayesian optimization, Thanh Dai Nguyen, Sunil Gupta, Santu Rana, Vu Nguyen, Svetha Venkatesh, Kyle Deane, Paul G. Sanders
Michigan Tech Publications

The influence of low temperature clustering on strengthening precipitation in ams alloy, Alex Poznak, Paul G. Sanders
Department of Materials Science and Engineering Publications

Free and open-source control software for 3-D motion and processing, Bas Wijnen, G. C. Anzalone, Amberlee S. Haselhuhn, Paul G. Sanders, Joshua M. Pearce
Department of Materials Science and Engineering Publications

Integrated voltage—current monitoring and control of gas metal arc weld magnetic ball-jointed open source 3-D printer, Yuenyong Nilsiam, Amberlee S. Haselhuhn, Bas Wijnen, Paul G. Sanders, Joshua M. Pearce
Department of Materials Science and Engineering Publications

High strength low alloy (HSLA) aluminum, Nicholas D. Johnson, Paul G. Sanders
Department of Materials Science and Engineering Publications

High ramp rate thermogravimetric analysis of zirconium(II) hydride and titanium(II) hydride, Joseph J. Licavoli, Paul G. Sanders
Department of Materials Science and Engineering Publications

Low-cost open-source voltage and current monitor for gas metal arc weld 3D printing, Anthony Pinar, Bas Wijnen, Gerald C. Anzalone, Timothy C. Havens, Paul G. Sanders, Joshua M. Pearce
Department of Materials Science and Engineering Publications

Design of an eta-phase precipitation-hardenable nickel-based alloy with the potential for improved creep strength above 1023 K (750 °C), Matthew J. Wong, Paul G. Sanders, John P. Shingledecker, Calvin L. White
Department of Materials Science and Engineering Publications

Substrate release mechanisms for gas metal arc weld 3D aluminum metal printing, Amberlee S. Haselhuhn, Eli J. Gooding, Alexandra G. Glover, Gerald C. Anzalone, Bas Wijnen, Paul G. Sanders, Joshua M. Pearce
Department of Materials Science and Engineering Publications

The diffusion coefficient of scandium in dilute aluminum-scandium alloys, Marcel A. Kerkove, Thomas D. Wood, Paul G. Sanders, Stephen L. Kampe, Douglas Swenson
Department of Materials Science and Engineering Publications

Austempered ductile iron performance at rail wheel operating conditions, Karl C. Warsinski, Pasi T. Lautala, Paul G. Sanders
Department of Materials Science and Engineering Publications

A low-cost open-source metal 3-D printer, Gerald C. Anzalone, Chenlong Zhang, Bas Wijnen, Paul G. Sanders, Joshua M. Pearce
Department of Materials Science and Engineering Publications

Processing and pore growth mechanisms in aluminum gasarites produced by thermal decomposition, Joseph J. Licavoli, Paul G. Sanders
Department of Materials Science and Engineering Publications

High-temperature fatigue of a hybrid aluminum metal matrix composite, J. T. Clark, Paul G. Sanders
Department of Materials Science and Engineering Publications

The effect of cold work on the precipitation and recrystallization kinetics in Al-Sc-Zr alloys, Barry A. Sadler, C. T. McNamara, S. L. Kampe, Paul G. Sanders, D. J. Swenson
Department of Materials Science and Engineering Publications

Fracture of nanostructured Sn/C anodes during Li-insertion, Katerina E. Aifantis, Meghan Hancock, Paul G. Sanders, Stephan A. Hackney
Department of Materials Science and Engineering Publications

Steering pull compensation, D. X. Wang, Paul G. Sanders
Department of Materials Science and Engineering Publications

Method of improving impact absorbing and deformation control characteristics of vehicle components, Ari Garo Caliskan, Paul G. Sanders, Armando Mateormando Joaquin, Matthew John Zaluzec
Department of Materials Science and Engineering Publications

A reduced-scale brake dynamometer for friction characterization, Paul G. Sanders, T. M. Dalka, R. H. Basch
Department of Materials Science and Engineering Publications

Pore distributions in nanocrystalline metals from small-angle neutron scattering, Paul G. Sanders, J. A. Eastman, J. R. Weertman
Paul Sanders

Are nanophase grain boundaries anomalous?, Paul G. Sanders, E. A. Stern, R. W. Siegel, M. Newville, D. Haskel
Paul Sanders