Research on the Phase Transition Process of Sessile Droplet on Carbon Fiber Cold Surface, Zhe Zhang, Huiqing Shang, Sunil S. Mehendale, Yuanlu Lang, Jianan Chen, Jinjin Tian
Michigan Tech Publications

Revealing the interplay between “intelligent behavior” and surface reconstruction of non-precious metal doped SrTiO3 catalysts during methane combustion, Zhenghong Bao, Victor Fung, Jisue Moon, Zachary D. Hood, Marie Rochow, James Kammert, Felipe Polo-Garzon, Zili Wu
Michigan Tech Publications

VISUAL STUDY OF THE FREEZING PROCESS OF A WATER DROPLET ON A HORIZONTAL COPPER PLATE, Jin Jin Tian, Xudong Gu, Shengnan Lv, Zhe Zhang, Sunil S. Mehendale, Xingbo Li
Michigan Tech Publications

3D-PRINTED CERAMIC VOLUMETRIC RECEIVERS: FROM HIERARCHICALLY-ORDERED TO NATURE-INSPIRED HIGH-FLUX SOLAR THERMAL COLLECTORS, Rasoul Bayaniahangar
Dissertations, Master's Theses and Master's Reports

The Development of a Machine for Macroscale Friction Stir Processing: A Work in Progress, William J. Emblom, Ayotunde Olayinka, Jared Marcel, Joshua Ferrara, Scott M. DePaula, Maria Fernanda Espinosa-Perez, Scott W. Wagner
Michigan Tech Publications

Tailoring microstructure of wire arc additively manufactured C–Mn–Si steel with post process heat treatment, M. Shamsujjoha, J. Licavoli, B. Lin, E. Harma, R. Patterson, T. Timmermann, M. Groeneveld, L. McLeod, P. Sanders
Michigan Tech Publications

Frequency domain measurements of melt pool recoil force using modal analysis, Tristan Cullom, Cody Lough, Nicholas Altese, Douglas Bristow, Robert Landers, Ben Brown, Troy Hartwig, Andrew Barnard, Jason Blough, Kevin Johnson, Edward Kinzel
Michigan Tech Publications

The influence of header design on two-phase flow distribution in plate-fin heat exchangers, Zhe Zhang, Sunil S. Mehendale, Shengnan Lv, Hui Yuan, Jin Jin Tian
Michigan Tech Publications

Preparation of MET Students for the NCEES FE Exam: Lessons Learned, Kevin Johnson, John L. Irwin
Michigan Tech Publications

Teaching Design Engineering Technology: Experiential Learning Activities, John L. Irwin
Michigan Tech Publications

S-STEM Student Reflections and IDP Process, Laura Kasson Fiss, John L. Irwin, Yin Yin Tan
Michigan Tech Publications

Defect Detection using Dynamic Analysis for Additive Manufactured Metals, Gita Deonarain
Dissertations, Master's Theses and Master's Reports

TOWARDS SYSTEMS ON CLOTH: THE DESIGN, MANUFACTURING, AND VALIDATION OF OPEN-SOURCE EMBROIDERED RESISTORS, Somerset Schrock
Dissertations, Master's Theses and Master's Reports

Design and Testing of an Open Source Vacuum Oven for Research, Community Recycling, and Additive Manufacturing, Benjamin R. Hubbard
Dissertations, Master's Theses and Master's Reports

Base Vibration Effects on Additive Manufactured Part Quality: A Study of 3D Printing Onboard U.S. Navy Ships, Nick Jensen
Dissertations, Master's Theses and Master's Reports

THERMOMECHANICAL MECHANISMS THAT CAUSE ADHESION OF ALUMINUM HIGH PRESSURE DIE CASTINGS TO THE DIE, Alex Monroe
Dissertations, Master's Theses and Master's Reports

Friction stir forward extrusion: Small scale tooling development and preliminary test results, William J. Emblom, Dillon J. Huval, Dylan J. Oustalet, Jacob Rubi, Ayotunde Olayinka, Scott W. Wagner, Muhammad A. Wahab
Michigan Tech Publications

What is the Future of Engineering Technology?, Patricia Fox, Brandon Sorge, Martin E. Gordon, Scott Danielson, Ronald Land, I. Richmond Nettey, John L. Irwin, et. al.
Michigan Tech Publications

FEA Taught the Industry Way, John L. Irwin, David Michael Labyak
Michigan Tech Publications

Faculty Instruction Face Shield Project, David Holden, John Schneiderhan
Michigan Tech 3D Designs

3D PRINTING OF IRON OXIDE INCORPORATED POLYDIMETHYLSILOXANE SOFT MAGNETIC ACTUATOR, Rasoul Bayaniahangar
Dissertations, Master's Theses and Master's Reports

DYNAMIC TESTING: AN EXPERIMENTAL APPROACH TO DEFECT IDENTIFICATION IN ADDITIVE MANUFACTURED PARTS, Aimee Allen
Dissertations, Master's Theses and Master's Reports

HETEROGENEOUS UNCERTAINTY QUANTIFICATION FOR RELIABILITY-BASED DESIGN OPTIMIZATION, Mingyang Li
Dissertations, Master's Theses and Master's Reports

The Development of a microscale tube hydroforming test bed and novel sealing system: A work in progress, William J. Emblom, Ayotunde Olayinka, Scott W. Wagner
Michigan Tech Publications

Developing an open source, inexpensive, large-scale polar configuration 3D printer, Sourabh Prashant Deshpande, Shrinivas Kulkarni, Sid Shah, J. L. Irwin
Michigan Tech Publications

Remotely controlled industrial robotic arm and simulation of automated thermal furnace, Prince Mehandi Ratta
Dissertations, Master's Theses and Master's Reports

MULTI-SCALE, CAPILLARY ASSISTED COPPER SURFACES FOR ENHANCED POOL BOILING HEAT TRANSFER PROCESSES, Chetan Agarwal
Dissertations, Master's Theses and Master's Reports

INFLUENCE OF MICRO-NUCLEATE BOILING ON ANNULAR FLOW REGIME HEAT TRANSFER COEFFICIENT VALUES AND FLOW PARAMETERS – FOR HIGH HEAT-FLUX FLOW BOILING OF WATER, Soroush Sepahyar
Dissertations, Master's Theses and Master's Reports

3D PRINTING IN LOW RESOURCE HEALTHCARE SETTINGS: ANALYSIS OF POTENTIAL IMPLEMENTATIONS, Alenna Beroza
Dissertations, Master's Theses and Master's Reports

Single-phase heat exchangers, Sunil S. Mehendale
Michigan Tech Publications

Simulations and Manipulatives used to Better Understand Graphics, Statics & Dynamics Concepts, John L. Irwin, Sunil S. Mehendale
Michigan Tech Publications

Slicer and process improvements for open-source GMAW-based metal 3-D printing, Yuenyong Nilsiam, Paul G. Sanders, Joshua M. Pearce
Paul Sanders

Open source 3-D printed nutating mixer, Dhwani K. Trivedi, Joshua M. Pearce
Joshua M. Pearce

Impact of DIY home manufacturing with 3D printing on the toy and game market, Emily Peterson, Joshua M. Pearce
Joshua M. Pearce

Slicer and process improvements for open-source GMAW-based metal 3-D printing, Yuenyong Nilsiam, Paul G. Sanders, Joshua M. Pearce
Joshua M. Pearce

Open-source parametric 3-D printed slot die system for thin film semiconductor processing, L. Y. Beeker, Adam Pringle, Joshua M. Pearce
Joshua M. Pearce

Tightening the loop on the circular economy: Coupled distributed recycling and manufacturing with recyclebot and RepRap 3-D printing, Shan Zhong, Joshua M. Pearce
Joshua M. Pearce

Open source multi-Head 3D printer for polymer-metal composite component manufacturing, J. Laureto, Joshua M. Pearce
Joshua M. Pearce

Energy payback time of a solar photovoltaic powered waste plastic recyclebot system, Shan Zhong, Pratiksha Rakhe, Joshua M. Pearce
Joshua M. Pearce

Free and open source 3-D model customizer for websites to democratize design with OpenSCAD, Yuenyong Nilsiam, Joshua M. Pearce
Joshua M. Pearce

Distributed manufacturing of flexible products: Technical feasibility and economic viability, Aubrey Woern, Joshua M. Pearce
Joshua M. Pearce

3-D printing solar photovoltaic racking in developing world, Ben Wittbrodt, Joshua M. Pearce
Joshua M. Pearce

Factors effecting real-time optical monitoring of fused filament 3D printing, Siranee Nuchitprasitchai, Michael C. Roggeman, Joshua M. Pearce
Joshua M. Pearce

Three hundred and sixty degree real-time monitoring of 3-D printing using computer analysis of two camera views, Siranee Nuchitprasitchai, Michael C. Roggeman, Joshua M. Pearce
Joshua M. Pearce

A new heat transfer coefficient correlation for pure refrigerants and near-azeotropic refrigerant mixtures flow boiling within horizontal microfin tubes, Sunil S. Mehendale
Michigan Tech Publications

CAPILLARY-ASSISTED ENHANCED CONDENSATION HEAT TRANSFER FOR LOW SURFACE TENSION LIQUIDS, Gnana Vishnu Durgam
Dissertations, Master's Theses and Master's Reports

Controlling the Formation of Titanium Nanotubes using Electric Fields, Derryl Poynor
Dissertations, Master's Theses and Master's Reports

A new correlation for predicting the heat transfer coefficients of R407C undergoing flow boiling within horizontal microfin tubes, Sunil S. Mehendale
Michigan Tech Publications

Open-source parametric 3-D printed slot die system for thin film semiconductor processing, L. Y. Beeker, Adam Pringle, Joshua M. Pearce
Department of Materials Science and Engineering Publications

Slicer and process improvements for open-source GMAW-based metal 3-D printing, Yuenyong Nilsiam, Paul G. Sanders, Joshua M. Pearce
Department of Materials Science and Engineering Publications

Distributed manufacturing of flexible products: Technical feasibility and economic viability, Aubrey Woern, Joshua M. Pearce
Department of Materials Science and Engineering Publications

Open source 3-D printed nutating mixer, Dhwani K. Trivedi, Joshua M. Pearce
Department of Materials Science and Engineering Publications

Tightening the loop on the circular economy: Coupled distributed recycling and manufacturing with recyclebot and RepRap 3-D printing, Shan Zhong, Joshua M. Pearce
Department of Materials Science and Engineering Publications

Free and open source 3-D model customizer for websites to democratize design with OpenSCAD, Yuenyong Nilsiam, Joshua M. Pearce
Department of Materials Science and Engineering Publications

Three hundred and sixty degree real-time monitoring of 3-D printing using computer analysis of two camera views, Siranee Nuchitprasitchai, Michael C. Roggemann, Joshua M. Pearce
Department of Materials Science and Engineering Publications

Impact of DIY home manufacturing with 3D printing on the toy and game market, Emily Peterson, Joshua M. Pearce
Department of Materials Science and Engineering Publications

Open source multi-Head 3D printer for polymer-metal composite component manufacturing, J. Laureto, Joshua M. Pearce
Department of Materials Science and Engineering Publications

Energy payback time of a solar photovoltaic powered waste plastic recyclebot system, Shan Zhong, Pratiksha Rakhe, Joshua M. Pearce
Department of Materials Science and Engineering Publications

Factors effecting real-time optical monitoring of fused filament 3D printing, Siranee Nuchitprasitchai, Michael C. Roggemann, Joshua M. Pearce
Department of Materials Science and Engineering Publications

Open-source, self-replicating 3-D printer factory for small-business manufacturing, Andre Laplume, Gerald C. Anzalone, Joshua M. Pearce
Joshua M. Pearce

Substrate release mechanisms for gas metal arc weld 3D aluminum metal printing, Amberlee S. Haselhuhn, Eli J. Gooding, Alexandra G. Glover, Gerald C. Anzalone, Bas Wijnen, Paul G. Sanders, Joshua M. Pearce
Joshua M. Pearce

Viability of distributed manufacturing of bicycle components with 3-D printing: CEN standardized polylactic acid pedal testing, Nagendra Gautam Tanikella, Benjamin L. Savonen, John K. Gershenson, Joshua M. Pearce
Joshua M. Pearce

NANOTEXTURED TITANIUM SURFACES FOR IMPLANTS: MANUFACTURING AND PACKAGING ASPECTS, Sachin Bhosle
Dissertations, Master's Theses and Master's Reports

Utilizing RepRap Style 3D Printers for the Manufacturing of Composite Heat Exchangers, John Laureto
Dissertations, Master's Theses and Master's Reports

3-D printing solar photovoltaic racking in developing world, Ben Wittbrodt, Joshua M. Pearce
Department of Materials Science and Engineering Publications

TEST SETUP DESIGN, EXPERIMENTATION, AND MODEL-BASED CONTROL OF HYBRID ELECTRIC POWERTRAINS INTEGRATED WITH LOW TEMPERETURE COMBUSTION ENGINES, Ali Soloukmofrad
Dissertations, Master's Theses and Master's Reports

Design and Fabrication of a Suspension Rig, Abhijith Geo Philip
Dissertations, Master's Theses and Master's Reports

DESIGN, FABRICATION AND ANALYSIS OF AN AUXILIARY POWER UNIT ON A HEAVY-DUTY TRUCK TO POWER THE HVAC SYSTEMS OF THE TRUCK DURING DRIVER OFF-DUTY CONDITIONS, Rohan Milind Kalurkar
Dissertations, Master's Theses and Master's Reports

MECHANICAL TESTING OF FUSED FILAMENT 3-D PRINTED COMPONENTS FOR DISTRIBUTED MANUFACTURING, Nagendra Gautam Tanikella
Dissertations, Master's Theses and Master's Reports

DESIGN FEATURES AND OPTIMIZATION OF PROFILE EXTRUSION DIES, Abhishek Sai Erri Pradeep
Dissertations, Master's Theses and Master's Reports

Viability of distributed manufacturing of bicycle components with 3-D printing: CEN standardized polylactic acid pedal testing, Nagendra Gautam Tanikella, Benjamin L. Savonen, John K. Gershenson, Joshua M. Pearce
Department of Materials Science and Engineering Publications

Open-source, self-replicating 3-D printer factory for small-business manufacturing, Andre Laplume, Gerald C. Anzalone, Joshua M. Pearce
Department of Materials Science and Engineering Publications

An Interactive Dynamics Learning Course, Sunil S. Mehendale, John L. Irwin, Robert A. Marlor
Michigan Tech Publications

DESIGN AND DEVELOPMENT OF AN AUTOMATED ROBOTIC STACKER, Shashank Barkur Lakshmikanth
Dissertations, Master's Theses and Master's Reports

Substrate release mechanisms for gas metal arc weld 3D aluminum metal printing, Amberlee S. Haselhuhn, Eli J. Gooding, Alexandra G. Glover, Gerald C. Anzalone, Bas Wijnen, Paul G. Sanders, Joshua M. Pearce
Department of Materials Science and Engineering Publications

The RepRap 3-D Printer Revolution in STEM Education, John L. Irwin, Joshua M. Pearce, Gerald C. Anzalone, Douglas Oppliger
Michigan Tech Publications

Wind Turbine Blade CAD Models used as Scaffolding Technique to Teach Design Engineers, John L. Irwin
Michigan Tech Publications