ENERGY ANALYSIS OF DROPLET IMPINGEMENT ON AN INCLINED WALL UNDER DIFFERENT TEMPERATURE ENVIRONMENTS, Jiachen Zhai
Dissertations, Master's Theses and Master's Reports

A real-time control-oriented discrete nonlinear model development for in-cylinder air charge, residual gas and temperature prediction of a Gasoline Direct Injection engine using cylinder, intake and exhaust pressures, Amir Khameneian, Xin Wang, Paul Dice, Jeffrey D. Naber, Mahdi Shahbakhti, Chad Archer, Peter Moilanen, Chris Glugla, Garlan Huberts
Michigan Tech Publications

DEVELOPMENT OF ADVANCED MODELS FOR PRE-IGNITION PREDICTION IN GAS ENGINES AND ANALYTICAL MODEL FOR WALLFILM EVAPORATION, Ankith Ullal
Dissertations, Master's Theses and Master's Reports

CALORIMETRIC MEASUREMENTS OF LUNAR REGOLITH SIMULANT AND WATER. AN EXPERIMENTAL STUDY CORRELATING WEIGHT PERCENT WATER AND TEMPERATURE CHANGE THROUGH PERIODS OF PHASE CHANGE., George B. Johnson
Dissertations, Master's Theses and Master's Reports

PARTIALLY STRATIFIED COMBUSTION OF NATURAL GAS FOR SPARK IGNITION ENGINES, Philip S. Zoldak
Dissertations, Master's Theses and Master's Reports

COMBUSTION DEVELOPMENT OF A HIGH LOAD HIGH-EFFICIENCY MICRO-PILOT DIESEL NATURAL GAS ENGINE, Vinicius Bonfochi Vinhaes
Dissertations, Master's Theses and Master's Reports

SORPTION-BASED DEHYDRATION SYSTEMS: THEORY-TO-DEMONSTRATION, Masoud Ahmadi
Dissertations, Master's Theses and Master's Reports

CONCEPT EVALUATION AND DEVELOPMENT OF A NOVEL APPROACH FOR INTEGRATION OF TURBOGENERATION, ELECTRIFICATION AND SUPERCHARGING ON HEAVY DUTY ENGINES, Satyum Joshi
Dissertations, Master's Theses and Master's Reports

3D-PRINTED CERAMIC VOLUMETRIC RECEIVERS: FROM HIERARCHICALLY-ORDERED TO NATURE-INSPIRED HIGH-FLUX SOLAR THERMAL COLLECTORS, Rasoul Bayaniahangar
Dissertations, Master's Theses and Master's Reports

AN EXPERIMENTAL STUDY OF FUEL SELECTION FOR A GASOLINE MULTI-MODE, SPARK IGNITED – COMPRESSION IGNITION ENGINE, Zachary J. Stanchina
Dissertations, Master's Theses and Master's Reports

NUMERICAL DEVELOPMENT OF A SIX-STROKE GASOLINE COMPRESSION IGNITION ENGINE, Oudumbar Rajput
Dissertations, Master's Theses and Master's Reports

MEMBRANE-BASED HEAT SINK FOR ENHANCED FLOW BOILING PERFORMANCE AND RELIABILITY, Shivam Gupta
Dissertations, Master's Theses and Master's Reports

HIGH INJECTION PRESSURE IMPINGING DIESEL SPRAY CHARACTERISTICS AND SUBSEQUENT SOOT FORMATION IN REACTING CONDITIONS, Zhihao Zhao
Dissertations, Master's Theses and Master's Reports

MULTISCALE INVESTIGATION OF DROPWISE CONDENSATION ON A SMOOTH HYDROPHILIC SURFACE, Shahab Bayani Ahangar
Dissertations, Master's Theses and Master's Reports

TORREFACTION OF MIXED SOLID WASTE, Zhuo Xu
Dissertations, Master's Theses and Master's Reports

Marangoni Propulsion of Active Particles, Saeed Jafari Kang
Dissertations, Master's Theses and Master's Reports

A COMBUSTION MODEL FOR MULTI-COMPONENT FUELS BASED ON RELATIVE REACTIVITY AND MOLECULAR STRUCTURE, Arash Jamali
Dissertations, Master's Theses and Master's Reports

INTEGRATED TORREFACTION-EXTRUSION SYSTEM FOR CONVERSION OF FIBER-PLASTIC WASTES INTO SOLID FUELS, Shreyas Kolapkar
Dissertations, Master's Theses and Master's Reports

EFFICIENT ENHANCEMENT OF MICRO-NUCLEATION RATES IN FLOW-BOILING - BY CONCURRENT MICRO-STRUCTURING OF THE BOILING-SURFACE AND ITS JUDICIOUS ENERGIZATION BY PIEZOELECTRIC-TRANSDUCER INDUCED ACOUSTIC VIBRATIONS., ATHARVA RAHANE
Dissertations, Master's Theses and Master's Reports

Water Injection and its Impact on Knock Mitigation in Spark Ignited Engines, Niranjan Miganakallu Narasimhamurthy
Dissertations, Master's Theses and Master's Reports

HIGH-PERFORMANCE ZERO LIQUID DISCHARGE (ZLD) TREATMENT OF HIGH-SALINITY BRINES USING A MULTIPLE-EFFECT ABSORPTION DISTILLATION CONCEPT, Sunil Pinnu
Dissertations, Master's Theses and Master's Reports

DESIGN, BUILD, AND ANALYSIS OF A COMPRESSED NATURAL GAS DIRECT INJECTION COMPRESSION IGNITION SINGLE CYLINDER RESEARCH ENGINE, Tyler Miller
Dissertations, Master's Theses and Master's Reports

IDENTIFICATION OF HEAT RELEASE SHAPES AND COMBUSTION CONTROL OF AN LTC ENGINE, Radhika Sitaraman
Dissertations, Master's Theses and Master's Reports

Numerical Investigation Of Spray Characterization Of Heater-GDI System, Ashwin Karthik Purushothaman
Dissertations, Master's Theses and Master's Reports

GENERATION OF PREMIX LAMINAR FLAME SPEED LIBRARY, Sai Prashanth Kumar
Dissertations, Master's Theses and Master's Reports

STUDY OF SPARK DISCHARGE AND CYCLE-TO-CYCLE COMBUSTION VARIATIONS USING OPTICAL DIAGNOSTICS, Mary Pourhasanzadehsharifi
Dissertations, Master's Theses and Master's Reports

DEVELOPMENT AND EXPERIMENTAL INVESTIGATION OF A LUNG-INSPIRED 3D-PRINTED DESICCANT-COATED HEAT EXCHANGER, Umamaheswar Puttur
Dissertations, Master's Theses and Master's Reports

ASSESSMENT AND IMPROVEMENT OF COMPUTATIONAL FLUID DYNAMICS METHODS FOR SEPARATED TURBULENT FLOWS AT LOW REYNOLDS NUMBERS, Tom Mancuso
Dissertations, Master's Theses and Master's Reports

NETWORKED MICROGRID OPTIMIZATION AND ENERGY MANAGEMENT, Robert S. Jane
Dissertations, Master's Theses and Master's Reports

Development of a 2D SCR Catalyst on a Diesel Particulate Filter Model for Design and Control Applications to a Ultra Low NOx Aftertreatment System, Venkata Chundru
Dissertations, Master's Theses and Master's Reports

Modeling and Control of Maximum Pressure Rise Rate in RCCI Engines, Aditya Basina
Dissertations, Master's Theses and Master's Reports

CHARACTERIZATION OF THE POST INJECTION BEHAVIOR OF GASOLINE DIRECT INJECTION FUEL INJECTORS, Robert A. Schroeter
Dissertations, Master's Theses and Master's Reports

OPTIMIZATION OF DIESEL ENGINE AND AFTER-TREATMENT SYSTEM FOR SERIES HYBRID FORKLIFT APPLICATION, Roman Maharjan
Dissertations, Master's Theses and Master's Reports

MULTI-SCALE, CAPILLARY ASSISTED COPPER SURFACES FOR ENHANCED POOL BOILING HEAT TRANSFER PROCESSES, Chetan Agarwal
Dissertations, Master's Theses and Master's Reports

INFLUENCE OF MICRO-NUCLEATE BOILING ON ANNULAR FLOW REGIME HEAT TRANSFER COEFFICIENT VALUES AND FLOW PARAMETERS – FOR HIGH HEAT-FLUX FLOW BOILING OF WATER, Soroush Sepahyar
Dissertations, Master's Theses and Master's Reports

DEVELOPMENT OF A TURBULENT BURNING VELOCITY MODEL BASED ON FLAME STRETCH CONCEPT FOR SPARK IGNITION ENGINES, Behdad Afkhami
Dissertations, Master's Theses and Master's Reports

PADDLE MIXER-EXTRUSION REACTOR FOR TORREFACTION AND PYROLYSIS, Stas Zinchik
Dissertations, Master's Theses and Master's Reports

OPTIMIZATION AND COMPARISON OF OVER-EXPANDED AND OTHER HIGH EFFICIENCY FOUR-STROKE SPARK-IGNITED BOOSTED ENGINES, Zhuyong Yang
Dissertations, Master's Theses and Master's Reports

HIGH INJECTION PRESSURE DME IGNITION AND COMBUSTION PROCESSES: EXPERIMENT AND SIMULATION, Xiucheng Zhu
Dissertations, Master's Theses and Master's Reports

DESIGN OPTIMIZATION OF BRAKE ROTOR USING CFD TECHNIQUES, Shubham Ramesh Jain
Dissertations, Master's Theses and Master's Reports

Experimental characterization of heat transfer in an additively manufactured polymer heat exchanger, Joshua M. Pearce
Joshua M. Pearce

ASSESSING THE IMPACT OF CYLINDER PRESSURE REFERENCE ERROR AND DETERMINING MITIGATION STRATEGIES IN A TURBOCHARGED SPARK IGNITION ENGINE WITH VVT, Sid Gopujkar
Dissertations, Master's Theses and Master's Reports

EXPERIMENTAL INVESTIGATION OF IMPINGED DROPLET DYNAMICS, Nitisha Ahuja
Dissertations, Master's Theses and Master's Reports

A New Technique to Determine Accommodation Coefficients of Cryogenic Propellants, Kishan Bellur
Dissertations, Master's Theses and Master's Reports

INNOVATIVE FIN-TUBES FOR A STANDARD STAGGERED BUNDLE FAMILY LEADING TO SIGNIFICANT REDUCTIONS IN AIR-SIDE THERMAL AND PRESSURE-DROP RESISTANCES FOR A POPULAR HEAT-EXCHANGER – QUANTITATIVE CHARACTERIZATIONS BASED ON A UNIQUE SYNTHESIS OF EXPERIMENTS, MODELING, AND RELIABLE COMPUTATIONS, Nikhil Shinde
Dissertations, Master's Theses and Master's Reports

Spray and Combustion Studies of High Reactivity Gasoline in Comparison to Diesel under Advanced Compression Ignition Engine Conditions, Meng Tang
Dissertations, Master's Theses and Master's Reports

AN EXPERIMENTAL AND COMPUTATIONAL STUDY OF FUEL SPRAY INTERACTION: FUNDAMENTALS AND ENGINE APPLICATIONS, Le Zhao
Dissertations, Master's Theses and Master's Reports

CAPILLARY-ASSISTED ENHANCED CONDENSATION HEAT TRANSFER FOR LOW SURFACE TENSION LIQUIDS, Gnana Vishnu Durgam
Dissertations, Master's Theses and Master's Reports

INNOVATIVE FIN-TUBES FOR A STANDARD STAGGERED BUNDLE FAMILY LEADING TO SIGNIFICANT REDUCTIONS IN AIR-SIDE THERMAL AND PRESSURE-DROP RESISTANCES FOR A POPULAR HEAT-EXCHANGER – MODELING AND ANALYSIS IN THE CONTEXT OF ITS DEPLOYMENT ADVANTAGES IN THE ENERGY-SECTOR, Amit Dev Vojini
Dissertations, Master's Theses and Master's Reports

EXPERIMENTAL AND COMPUTATIONAL INVESTIGATION OF DUAL FUEL DIESEL- NATURAL GAS RCCI COMBUSTION IN A HEAVY-DUTY DIESEL ENGINE, Mufaddel Dahodwala
Dissertations, Master's Theses and Master's Reports

INVESTIGATION ON THE POTENTIAL OF A CO2 CAPTURE SYSTEM, DOWNSTREAM OF THE AFTERTREATMENT SYSTEM FOR A HEAVY-DUTY ENGINE APPLICATION, Murchana Pathak
Dissertations, Master's Theses and Master's Reports

Thermomagnetic Convective Cooling of Hall Effect Thruster, Elizabeth M. Vanheusden
Dissertations, Master's Theses and Master's Reports

COMBUSTION DEVELOPMENT OF A HIGH EFFICIENCY DIESEL MICRO PILOT NATURAL GAS ENGINE, Vinicius Bonfochi Vinhaes
Dissertations, Master's Theses and Master's Reports

COLD START ANALYSIS AND MODELING OF A DIRECT-INJECTION GASOLINE ENGINE, Yash Borghate
Dissertations, Master's Theses and Master's Reports

ANALYSIS OF INJECTION PARAMETERS INFLUENCING GASOLINE DIRECT INJECTION COMPRESSION IGNITION (GDICI) ENGINE OPERATION IN LTC USING NAPHTHA, Devyani Patil
Dissertations, Master's Theses and Master's Reports

Pyrolysis of Fiber-Plastic Waste Blends, Shreyas Kolapkar
Dissertations, Master's Theses and Master's Reports

Comparative experimental and computational studies for annular condensing and boiling flows in millimeter scale horizontal ducts, Amitabh Narain, Michael Toomas Kivisalu, Ranjeeth R. Naik, Patcharapol Gorgitrattanagul, Soumya Asimkumar Mitra, Mohammed Hasan
Amitabh Narain

Effects of exit-condition, gravity, and surface-tension on stability and noise-sensitivity issues for steady condensing flows inside tubes and channels, L. Phan, X. Wang, Amitabh Narain
Amitabh Narain

A quasi one-dimensional method and results for steady annular/stratified shear and gravity driven condensing flows, Soumya Asimkumar Mitra, Amitabh Narain, Ranjeeth R. Naik, Shantanu D. Kulkarni
Amitabh Narain

Experimental results on gravity driven fully condensing flows in vertical tubes, their agreement with theory, and their differences with shear driven flows’ boundary-condition sensitivities, Jorge H. Kurita, Michael Toomas Kivisalu, Soumya Asimkumar Mitra, Ranjeeth R. Naik, Amitabh Narain
Amitabh Narain

DEVELOPMENT OF A TURBULENT FLAME SPEED MODEL BASED ON FLAME STRETCH CONCEPT FOR SPARK IGNITION ENGINES, Behdad Afkhami
Dissertations, Master's Theses and Master's Reports

SIMULATION STUDY ON EFFECT OF GAS CHARGING AND EGR IN A DUAL-FUEL ENGINE, Satyavenkata Naga Sai Sharath Gorthy
Dissertations, Master's Theses and Master's Reports

SINGLE CYLINDER ENGINE STUDIES WITH IMPINGING DIRECT INJECTION FUEL INJECTOR, Ankur Gupta
Dissertations, Master's Theses and Master's Reports

Simulation of Diesel Particulate Filter regeneration using Lattice Boltzmann method, Kshitiz Kumar Jain
Dissertations, Master's Theses and Master's Reports

THE EMISSION AND PARTICULATE MATTER OXIDATION PERFORMANCE OF A SCR CATALYST ON A DIESEL PARTICULATE FILTER WITH A DOWNSTREAM SCR, Sagar Sharma
Dissertations, Master's Theses and Master's Reports

Modeling Mass and Thermal Transport in Thin Porous Media of PEM Fuel Cells, Vinaykumar Konduru
Dissertations, Master's Theses and Master's Reports

AN EXPERIMENTAL INVESTIGATION ON THE EFFECT OF DUAL COIL IGNITION DISCHARGES ON DILUTE COMBUSTION IN A SPARK IGNITION ENGINE, Sandesh Rao
Dissertations, Master's Theses and Master's Reports

IMPACT OF NATURAL GAS DIRECT INJECTION ON THERMAL EFFICINECY IN A SPARK IGNITION ENGINE, James Sevik
Dissertations, Master's Theses and Master's Reports

THE IMPACT OF WATER INJECTION ON SPARK IGNITION ENGINE PERFORMANCE UNDER HIGH LOAD OPERATION, Jeremy Worm
Dissertations, Master's Theses and Master's Reports

Incorporation of Higher Carbon Number Alcohols in Gasoline Blends for Application in Spark-Ignition Engines, Kristina Lawyer
Dissertations, Master's Theses and Master's Reports

TURBULENT TRANSITION SIMULATION AND PARTICULATE CAPTURE MODELING WITH AN INCOMPRESSIBLE LATTICE BOLTZMANN METHOD, John R. Murdock
Dissertations, Master's Theses and Master's Reports

ASSESSMENT OF ANNULAR FLOW BOILING IN THE CONTEXT OF COMPUTATIONAL FLUID DYNAMICS (CFD) SIMULATIONS, EXPERIMENTS, AND EXISTING CORRELATIONS, HRISHIKESH PRASAD RANGA PRASAD
Dissertations, Master's Theses and Master's Reports

Effect of spark advance and fuel on knocking tendency of spark ignited engine, Abhay S. Joshi
Dissertations, Master's Theses and Master's Reports

Experimental investigations of temperature controlled innovative annular flow-boiling of FC-72 in millimeter scale ducts – steady and enhanced pulsatile realizations, Patcharapol Gorgitrattanagul
Dissertations, Master's Theses and Master's Reports

On Transport and Deposition phenomena in Diesel Particulate Filters using the Incompressible Lattice Boltzmann Method, Aamir Ibrahim
Dissertations, Master's Theses and Master's Reports

A Study of High Temperature Heat Pipes and the Impact of Magnetic Field on the Flow of Liquid Metal, Udit Sharma
Dissertations, Master's Theses and Master's Reports

Utilizing RepRap Style 3D Printers for the Manufacturing of Composite Heat Exchangers, John Laureto
Dissertations, Master's Theses and Master's Reports

HEAT TRANSFER ANALYSIS IN A PADDLE REACTOR FOR BIOMASS FAST PYROLYIS, Ankith Ullal
Dissertations, Master's Theses and Master's Reports

DEVELOPMENT OF AN EVAPORATION SUB-MODEL AND SIMULATION OF MULTIPLE DROPLET IMPINGEMENT IN VOLUME OF FLUID METHOD, Sathya Prasad Potham
Dissertations, Master's Theses and Master's Reports

MODEL-BASED CONTROL OF HYBRID ELECTRIC POWERTRAINS INTEGRATED WITH LOW TEMPERATURE COMBUSTION ENGINES, Ali Soloukmofrad
Dissertations, Master's Theses and Master's Reports

COMPETITION VEHICLE BASED INTAKE MANIFOLD DESIGN, Joshua N. Matiash
Dissertations, Master's Theses and Master's Reports

AN ASSESSMENT OF THE VALIDITY OF THE KINETIC MODEL FOR LIQUID-VAPOR PHASE CHANGE BY EXAMINING CRYOGENIC PROPELLANTS, Kishan Bellur
Dissertations, Master's Theses and Master's Reports

EXPERIMENTAL STUDY OF THE FLOW OF FERROFLUID IN A POROUS MEDIA UNDER A MAGNETIC FIELD, Muskaan Khurana
Dissertations, Master's Theses and Master's Reports

SHEAR DRIVEN SUPPRESSED NUCLEATION ANNULAR FLOW-BOILING IN MILLIMETER-SCALE CHANNELS: DIRECT NUMERICAL SIMULATIONS, Sharayu Bhasme
Dissertations, Master's Theses and Master's Reports

EVALUATION OF SENSORS AND STRATEGIES FOR CLOSED LOOP COMBUSTION CONTROL OF A GASOLINE SPARK-IGNITION TURBOCHARGED DIRECT INJECTION ENGINE, Paul Dice
Dissertations, Master's Theses and Master's Reports

EXPERIMENTAL STUDY, MODELLING AND CONTROLLER DESIGN FOR AN RCCI ENGINE, Naga Nithin Teja Kondipati
Dissertations, Master's Theses and Master's Reports

EXPERIMENTAL INVESTIGATION OF FAST PYROLYSIS OF ARUNDO DONAX IN A NOVEL PADDLE REACTOR, Chintan Desai
Dissertations, Master's Theses and Master's Reports

AN EXPERIMENTAL INVESTIGATION OF THE EFFECT OF TEMPERATURE AND SPACE VELOCITY ON THE PERFORMANCE OF A CU-ZEOLITE FLOW-THROUGH SCR AND A SCR CATALYST ON A DPF WITH AND WITHOUT PM LOADING, Vaibhav Kadam
Dissertations, Master's Theses and Master's Reports

LOW TEMPERATURE SPLIT INJECTION SPRAY COMBUSTION: IGNITION, FLAME STABILIZATION AND SOOT FORMATION CHARACTERISTICS IN DIESEL ENGINE CONDITIONS, Ahmed Abdul Moiz
Dissertations, Master's Theses and Master's Reports

NEW MODEL TO PREDICT HEAT TRANSFER COEFFICIENT FOR FLOW BOILING IN MICROFIN TUBES, Reem Sadruddin Merchant
Dissertations, Master's Theses and Master's Reports

DESIGN OF REAL-TIME COMBUSTION FEEDBACK SYSTEM AND EXPERIMENTAL STUDY OF AN RCCI ENGINE FOR CONTROL, Jayant Kumar Arora
Dissertations, Master's Theses and Master's Reports

PREDICTIVE CONTROL OF POWER GRID-CONNECTED ENERGY SYSTEMS BASED ON ENERGY AND EXERGY METRICS, Meysam Razmara
Dissertations, Master's Theses and Master's Reports

MULTI- HOLE IMPINGING JET SPRAY ANALYSIS IN ENGINE-LIKE CONDITIONS, Sanjeet Limbu
Dissertations, Master's Theses and Master's Reports

ELEMENTARY ASSESSMENTS AND SIMULATIONS BASED PROPOSALS FOR NEW HEAT TRANSFER CORRELATIONS AND FLOW REGIME MAPS FOR ANNULAR/STRATIFIED REGIME OF SHEAR DRIVEN INTERNAL CONDENSING FLOWS, Siddharth Ravikumar
Dissertations, Master's Theses and Master's Reports

TRANSIENT THERMOELECTRIC SUPERCOOLING: ISOSCELES CURRENT PULSES FROM A RESPONSE SURFACE PERSPECTIVE AND THE PERFORMANCE EFFECTS OF PULSE COOLING A HEAT GENERATING MASS, Alfred Piggott
Dissertations, Master's Theses and Master's Reports

Innovative realizations of high heat-flux boiling and condensing flows for milli-meter and micro-meter scale applications, Michael Toomas Kivisalu, Amitabh Narain, Patcharapol Gorgitrattanagul, Ranjeeth R. Naik
Department of Mechanical Engineering-Engineering Mechanics Publications

Sensitivity of shear-driven internal condensing flows to pressure fluctuations and its utilization for heat flux enhancements, Michael Toomas Kivisalu, Patcharapol Gorgitrattanagul, Amitabh Narain, Ranjeeth R. Naik, Mohammed Hasan
Department of Mechanical Engineering-Engineering Mechanics Publications

Comparative experimental and computational studies for annular condensing and boiling flows in millimeter scale horizontal ducts, Amitabh Narain, Michael Toomas Kivisalu, Ranjeeth R. Naik, Patcharapol Gorgitrattanagul, Soumya Asimkumar Mitra, Mohammed Hasan
Department of Mechanical Engineering-Engineering Mechanics Publications

A quasi one-dimensional method and results for steady annular/stratified shear and gravity driven condensing flows, Soumya Asimkumar Mitra, Amitabh Narain, Ranjeeth R. Naik, Shantanu D. Kulkarni
Department of Mechanical Engineering-Engineering Mechanics Publications

Experimental results on gravity driven fully condensing flows in vertical tubes, their agreement with theory, and their differences with shear driven flows’ boundary-condition sensitivities, Jorge H. Kurita, Michael Toomas Kivisalu, Soumya Asimkumar Mitra, Ranjeeth R. Naik, Amitabh Narain
Department of Mechanical Engineering-Engineering Mechanics Publications

Effects of exit-condition, gravity, and surface-tension on stability and noise-sensitivity issues for steady condensing flows inside tubes and channels, L. Phan, X. Wang, Amitabh Narain
Department of Mechanical Engineering-Engineering Mechanics Publications

Induction heating of thin films, Paul L. Bergstrom, Melissa L. Trombley
Michigan Tech Patents

Interfacial shear models and their required asymptotic form for annular/stratified film condensation flows in inclined channels and vertical pipes, Amitabh Narain, Guang Yu, Qingyu Liu
Department of Mechanical Engineering-Engineering Mechanics Publications

Pressure driven flow of pure vapor undergoing laminar film condensation between parallel plates, Amitabh Narain, Y. Kizilyalli
Department of Mechanical Engineering-Engineering Mechanics Publications